Change of Use Drawings in Thames View IG11
Fixed-fee, MCIAT-chartered change of use drawings for Thames View (IG11) homeowners — London Borough of Barking and Dagenham validation and local constraints handled from the start.
Thames View (IG11) is a cohesive 1950s London County Council overspill estate, built on former marshland south of Barking town centre as a planned postwar community of low-rise council-built houses and blocks. That open, uniform estate layout — quite distinct from the borough's older terraced streets — is what shapes nearly every householder project here, so an extension has to sit comfortably within a very consistent, planned streetscape.
There is no conservation area covering Thames View — that is a genuine, verified fact, not an omission. Its planning character is shaped instead by the sheer uniformity of the estate layout and by Barking and Dagenham's householder design expectations, which lean on keeping the original postwar rhythm, materials and building lines intact. We treat that estate cohesion, rather than a conservation designation, as the reference point when we design an extension.
Because so many Thames View houses passed into private ownership after Right to Buy, demand for rear extensions, side infills and loft conversions is steady across streets like Bastable Avenue, Maplestead Road and Moore Crescent. We check each property's permitted-development position against Barking and Dagenham's borough-wide controls first, then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.
Planning in Thames View (IG11): what to know before you apply
Because the estate is so uniform, Barking and Dagenham assess extensions on Thames View houses against the consistent postwar street pattern, so matching brick, render and roof form matters more than on a mixed-typology road. There is no conservation area and no estate-specific Article 4 direction, so many houses retain permitted development rights for rear and loft work — but the open estate layout, shared building lines and low-lying former-marshland ground mean spacing, neighbour impact and drainage are the points an application turns on.
Typical Thames View housing stock
Cohesive 1950s council-built houses and low-rise blocks arranged on a planned, open postwar layout, many now privately owned following Right to Buy — which is what drives the steady flow of rear-extension and loft-conversion work across the estate.
Streets we regularly draw for in Thames View
Bastable Avenue · River Road · Renwick Road · Choats Road · Upney Lane · Stamford Road · Aconbury Road · Pinley Gardens · Burnham Road · Maplestead Road · Castle Road · Moore Crescent
What IG11 is actually built of
Measured from 261 classified residential buildings in IG11, not from a description of the area.
Thames View IG11 housing mix
Residential building form across the IG11 postcode district, from 261 classified buildings.
| Attached on more than one side | 60% |
|---|---|
| Attached on one side | 38% |
| Detached | 2% |
| Median building footprint | 59 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.92 |
| Buildings classified | 261 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Change of Use Drawings for Thames View (IG11) homes: the package and the process
A change of use application is decided on what the building is, what it becomes, and what that changes. The drawings show the existing use class layout and the proposed one at the same scale, with a floor area schedule for each so the officer can see exactly what is moving between uses.
The supporting drawings usually matter as much as the plans. Access, parking, servicing arrangements, refuse storage and any external alteration all get drawn, because the objections to a change of use are rarely about the internal layout — they are about what the new use does to the street.
The building's form limits what it can honestly become. A ground-floor unit with its own frontage converts to residential more readily than upper floors reached through a shared entrance, and a deep plan with windows on one elevation only will struggle to give a habitable room adequate light whatever the policy position.
What counts as a material change of use?
Not every change in how a building is used needs planning permission — only a 'material' change, one significant enough to affect the character of the use of the land. Converting a single dwellinghouse into two or more flats is always material. Adding paying lodgers within a single household usually is not, until the household tips over into a small House in Multiple Occupation. We assess whether your proposed change crosses that threshold before recommending a route.
The Use Classes Order: C3, C4, E and sui generis
The Use Classes Order groups uses so planners, and permitted development rules, can treat similar activities consistently.
C3 — Dwellinghouses
The class covering a single household living as a single unit, including up to two people living together as a single household who are not related. Most family homes and self-contained flats fall here.
C4 — Houses in multiple occupation (small)
Covers a shared house or flat occupied by three to six unrelated people sharing basic amenities such as a kitchen or bathroom. Moving from C3 to C4 is a change of use, though it is often permitted development unless your borough has removed that right.
Class E — Commercial, business and service
A wide class combining shops, offices, gyms, cafes and other business uses that can change between each other without planning permission, but changing from Class E to residential use is a material change requiring the prior-approval or full planning route.
Sui generis
Uses that do not fit any class, including large HMOs of seven or more unrelated occupants, betting shops and drinking establishments. A change of use to or from a sui generis use normally needs planning permission.
Do I need full planning permission or can I use prior approval?
Some changes of use are permitted development subject to a prior-approval application rather than full planning permission — the best-known example is Class MA, which allows certain Class E commercial premises to become residential (C3) subject to the council assessing specific matters such as flooding, contamination and noise, without a full application. Other changes, including most conversions of a house into self-contained flats, fall outside any prior-approval route and need full householder or full planning permission. We identify which route applies to your building before drawing anything.
| Route | When it applies | Typical package | Fee from |
|---|---|---|---|
| Prior approval (Class MA) | Class E commercial to residential, meeting the criteria | Prior-approval drawings and statement | £1,200 |
| Full planning permission | Conversion into flats, HMO or use outside prior approval | Planning + building regs | £1,600–£2,400 |
| No application needed | Use falls within an existing permitted class change | Drawings for record purposes only | £450 |
Change of Use Drawings in Thames View IG11 — FAQs
How much do change of use drawings cost in London?+
What is the difference between a material change of use and general permitted development?+
How long does a change of use application take to be decided?+
Do I need an architect for a change of use application?+
Will converting my house into flats need building regulations approval too?+
Do I need planning permission to extend a house in Thames View?+
Is Thames View in a conservation area?+
How much do planning and building-regulation drawings cost for a Thames View extension?+
How long does Barking & Dagenham Council take to decide?+
Get your free Thames View planning assessment
Tell us your Thames View (IG11) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.