Change of Use Drawings in Becontree RM9
Fixed-fee, MCIAT-chartered change of use drawings for Becontree (RM9) homeowners — London Borough of Barking and Dagenham validation and local constraints handled from the start.
Becontree (RM9) is defined by one thing above all: the Becontree Estate, built by the London County Council between 1921 and 1935 and still one of the largest public housing estates ever created, with roughly 26,000 homes laid out on garden-suburb principles. Almost every householder project here is an extension or loft on one of those cohesive interwar two-storey cottages, so the drawings have to sit comfortably within a very consistent, planned streetscape.
There is no conservation area covering Becontree — that is a genuine, verified fact, not an omission. Its planning character is instead shaped by the sheer uniformity of the estate layout and by the London Borough of Barking and Dagenham's design expectations, which lean on keeping the original cottage rhythm, materials and building lines intact. We treat that estate cohesion, rather than a conservation designation, as the reference point when we design an extension.
Because so many Becontree houses passed into private ownership after Right to Buy, demand for rear extensions, side infills and loft conversions is steady across streets like Gale Street, Lodge Avenue and Fitzstephen Road. We check each property's permitted-development position against Barking and Dagenham's borough-wide controls first, then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.
Planning in Becontree (RM9): what to know before you apply
Because the estate is so uniform, Barking and Dagenham assess extensions on Becontree cottages against the consistent interwar street pattern, so matching original brick, render and roof form matters more than on a mixed-typology road. There is no conservation area and no estate-specific Article 4 direction, so many houses retain permitted development rights for rear and loft work — but the modest original plots and shared building lines mean depth, height and neighbour impact are the points a householder application is judged on.
Typical Becontree housing stock
Two-storey interwar cottages — short terraced and semi-detached runs of brick and rendered houses set behind small front gardens on wide, uniformly planned streets. Built by the London County Council between 1921 and 1935, many are now privately owned following Right to Buy, which is what drives the steady flow of rear-extension and loft-conversion work across the estate.
Streets we regularly draw for in Becontree
Lodge Avenue · Gale Street · Marlborough Road · Fitzstephen Road · Ilchester Road · Rutland Gardens · Babington Road · Dronfield Gardens · Hewett Road · Cornworthy Road · Harrold Road · Easebourne Road
What RM9 is actually built of
Measured from 248 classified residential buildings in RM9, not from a description of the area.
Becontree RM9 housing mix
Residential building form across the RM9 postcode district, from 248 classified buildings.
| Attached on more than one side | 62% |
|---|---|
| Attached on one side | 37% |
| Detached | 1% |
| Median building footprint | 48 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.06 |
| Buildings classified | 248 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Change of Use Drawings for Becontree (RM9) homes: the package and the process
A change of use application is decided on what the building is, what it becomes, and what that changes. The drawings show the existing use class layout and the proposed one at the same scale, with a floor area schedule for each so the officer can see exactly what is moving between uses.
The supporting drawings usually matter as much as the plans. Access, parking, servicing arrangements, refuse storage and any external alteration all get drawn, because the objections to a change of use are rarely about the internal layout — they are about what the new use does to the street.
The building's form limits what it can honestly become. A ground-floor unit with its own frontage converts to residential more readily than upper floors reached through a shared entrance, and a deep plan with windows on one elevation only will struggle to give a habitable room adequate light whatever the policy position.
What counts as a material change of use?
Not every change in how a building is used needs planning permission — only a 'material' change, one significant enough to affect the character of the use of the land. Converting a single dwellinghouse into two or more flats is always material. Adding paying lodgers within a single household usually is not, until the household tips over into a small House in Multiple Occupation. We assess whether your proposed change crosses that threshold before recommending a route.
The Use Classes Order: C3, C4, E and sui generis
The Use Classes Order groups uses so planners, and permitted development rules, can treat similar activities consistently.
C3 — Dwellinghouses
The class covering a single household living as a single unit, including up to two people living together as a single household who are not related. Most family homes and self-contained flats fall here.
C4 — Houses in multiple occupation (small)
Covers a shared house or flat occupied by three to six unrelated people sharing basic amenities such as a kitchen or bathroom. Moving from C3 to C4 is a change of use, though it is often permitted development unless your borough has removed that right.
Class E — Commercial, business and service
A wide class combining shops, offices, gyms, cafes and other business uses that can change between each other without planning permission, but changing from Class E to residential use is a material change requiring the prior-approval or full planning route.
Sui generis
Uses that do not fit any class, including large HMOs of seven or more unrelated occupants, betting shops and drinking establishments. A change of use to or from a sui generis use normally needs planning permission.
Do I need full planning permission or can I use prior approval?
Some changes of use are permitted development subject to a prior-approval application rather than full planning permission — the best-known example is Class MA, which allows certain Class E commercial premises to become residential (C3) subject to the council assessing specific matters such as flooding, contamination and noise, without a full application. Other changes, including most conversions of a house into self-contained flats, fall outside any prior-approval route and need full householder or full planning permission. We identify which route applies to your building before drawing anything.
| Route | When it applies | Typical package | Fee from |
|---|---|---|---|
| Prior approval (Class MA) | Class E commercial to residential, meeting the criteria | Prior-approval drawings and statement | £1,200 |
| Full planning permission | Conversion into flats, HMO or use outside prior approval | Planning + building regs | £1,600–£2,400 |
| No application needed | Use falls within an existing permitted class change | Drawings for record purposes only | £450 |
Change of Use Drawings in Becontree RM9 — FAQs
How much do change of use drawings cost in London?+
What is the difference between a material change of use and general permitted development?+
How long does a change of use application take to be decided?+
Do I need an architect for a change of use application?+
Will converting my house into flats need building regulations approval too?+
Do I need planning permission to extend a house on the Becontree Estate?+
Is Becontree in a conservation area?+
How much do planning and building-regulation drawings cost for a Becontree extension?+
How long does Barking & Dagenham Council take to decide?+
Get your free Becontree planning assessment
Tell us your Becontree (RM9) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.