Single-storey rear extension onto a garden behind an interwar Becontree RM9 LCC cottage in Barking and Dagenham

Becontree · RM9 · Barking & Dagenham

Building Regulations Drawings in Becontree RM9

Fixed-fee, MCIAT-chartered building regulations drawings for Becontree (RM9) homeowners — London Borough of Barking and Dagenham validation and local constraints handled from the start.

Becontree (RM9) is defined by one thing above all: the Becontree Estate, built by the London County Council between 1921 and 1935 and still one of the largest public housing estates ever created, with roughly 26,000 homes laid out on garden-suburb principles. Almost every householder project here is an extension or loft on one of those cohesive interwar two-storey cottages, so the drawings have to sit comfortably within a very consistent, planned streetscape.

There is no conservation area covering Becontree — that is a genuine, verified fact, not an omission. Its planning character is instead shaped by the sheer uniformity of the estate layout and by the London Borough of Barking and Dagenham's design expectations, which lean on keeping the original cottage rhythm, materials and building lines intact. We treat that estate cohesion, rather than a conservation designation, as the reference point when we design an extension.

Because so many Becontree houses passed into private ownership after Right to Buy, demand for rear extensions, side infills and loft conversions is steady across streets like Gale Street, Lodge Avenue and Fitzstephen Road. We check each property's permitted-development position against Barking and Dagenham's borough-wide controls first, then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.

Proposed floor plan

Becontree RM9

Becontree (RM9) — planning at a glance

Council: London Borough of Barking and Dagenham
Postcode district: RM9
Planning portal: View the Barking & Dagenham planning portal
Housing stock: Two-storey interwar cottages — short terraced and semi-detached runs of brick and rendered houses set behind small front gardens on wide, uniformly planned streets. Built by the London County Council between 1921 and 1935, many are now privately owned following Right to Buy, which is what drives the steady flow of rear-extension and loft-conversion work across the estate.
Article 4: No area-specific Article 4 direction is published for the Becontree Estate; Barking and Dagenham's borough-wide permitted-development controls and the council's householder design guidance still apply.
Sample streets: Lodge Avenue · Gale Street · Marlborough Road · Fitzstephen Road · Ilchester Road · Rutland Gardens · Babington Road · Dronfield Gardens · Hewett Road · Cornworthy Road · Harrold Road · Easebourne Road
Local constraints: Strong estate-wide visual cohesion: the uniform interwar cottage layout means front-elevation changes, roof forms and materials are assessed against a consistent street rhythm rather than a one-off houseBarking and Dagenham's borough-wide permitted-development limits and householder design guidance govern extension depth, height and coverage — no local Article 4 direction narrows them further on the estateMatching original facing brick, render finishes and roof tiles so a rear or side addition reads as part of the original cottage rather than an obvious bolt-onModest original plot and garden sizes on many terraced runs, which constrain how deep a single-storey rear extension can go before it needs a full householder applicationSemi-detached and short-terrace forms where side and rear building lines are shared with neighbours, making party-wall relationships and overshadowing relevant to what gets approved

Planning in Becontree (RM9): what to know before you apply

Because the estate is so uniform, Barking and Dagenham assess extensions on Becontree cottages against the consistent interwar street pattern, so matching original brick, render and roof form matters more than on a mixed-typology road. There is no conservation area and no estate-specific Article 4 direction, so many houses retain permitted development rights for rear and loft work — but the modest original plots and shared building lines mean depth, height and neighbour impact are the points a householder application is judged on.

Typical Becontree housing stock

Two-storey interwar cottages — short terraced and semi-detached runs of brick and rendered houses set behind small front gardens on wide, uniformly planned streets. Built by the London County Council between 1921 and 1935, many are now privately owned following Right to Buy, which is what drives the steady flow of rear-extension and loft-conversion work across the estate.

Streets we regularly draw for in Becontree

Lodge Avenue · Gale Street · Marlborough Road · Fitzstephen Road · Ilchester Road · Rutland Gardens · Babington Road · Dronfield Gardens · Hewett Road · Cornworthy Road · Harrold Road · Easebourne Road

What RM9 is actually built of

Measured from 248 classified residential buildings in RM9, not from a description of the area.

Becontree RM9 housing mix

Residential building form across the RM9 postcode district, from 248 classified buildings.

Attached on more than one side	62%
Attached on one side	37%
Detached	1%
Median building footprint	48 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	1.06
Buildings classified	248

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Building Regulations Drawings for Becontree (RM9) homes: the package and the process

A Full Plans submission is a technical argument, not a picture. The sheets carry construction build-ups for floors, walls and roof, insulation values and junction details, drainage runs and invert levels, fire escape routes and protected stairs, ventilation provision and the structural elements that carry it all. Building Control checks each against the Approved Documents before work starts.

We coordinate the structural design with the architectural sheets in-house, so the beam sizes on the calculations are the beam sizes on the sections, and the openings your builder prices are the openings that were approved. Where a detail is unusual, we draw it rather than leave it to be resolved on site.

Construction details follow the existing fabric. Solid brick walls, suspended timber floors and uninsulated roofs each need a different build-up to reach the required performance, and a terrace has party wall junctions to detail that a detached house simply does not.

What do building regulations drawings cover?

A building control package translates the approved design into a buildable, compliant specification.

Construction sections and detailed junctions
Structural drawings and calculations (steel beams, foundations, loadings)
Part L thermal performance and insulation specification
Fire safety — escape routes, protected structure, alarms
Drainage and ventilation layouts

Full Plans or Building Notice — which should I choose?

A Full Plans application has your drawings checked and approved by Building Control before work starts, giving certainty and a document lenders and buyers like to see. A Building Notice lets simpler work start sooner but is inspected as it proceeds, with less up-front certainty. For most London extensions and loft conversions we recommend Full Plans, and prepare the package accordingly. Building regulations are a separate consent from planning permission, and the two are often confused — the explainer on permitted development rights sets out which projects escape a planning application but still need building-regs approval, and Architectural Drawings covers the same building-regs package where you want a chartered practice to carry it through to sign-off.

Why coordinate structural calculations in-house?

When the same team draws the building and calculates its structure, the steel schedule matches the drawings and the builder never waits on a missing detail. It removes the classic gap between an architect's drawings and a separately-appointed engineer's calculations.

Full Plans vs Building Notice for a London project
Factor	Full Plans	Building Notice
Drawings checked before work starts	Yes	No
Up-front certainty	High — approval in writing	Lower — inspected as built
Best for	Extensions, lofts, structural work	Minor, simple works
Evidence for lenders and buyers	Full approval record	Completion certificate only
Risk of costly on-site rework	Low	Higher if issues are found late

Sheet from a building regulations drawings package drawn for a Becontree property in RM9, showing the existing and proposed arrangement at scale — A sheet from the building regulations drawings package we submit to London Borough of Barking and Dagenham for Becontree (RM9) properties.

Also in Becontree RM9

Planning Permission Planning Drawings Architectural Drawings Loft Conversion Drawings House Extension Drawings Building Regulations Drawings across Barking & Dagenham Building Regulations Drawings across London

FAQ

Building Regulations Drawings in Becontree RM9 — FAQs

Do I need building regulations approval as well as planning permission?+

Almost always, yes. Planning permission covers what the building looks like; building regulations cover how safely it is built. Most extensions and loft conversions need both.

How long does Building Control approval take?+

A Full Plans application is typically assessed within about five weeks. We prepare a complete package and respond to any conditions promptly, so approval is not held up by missing detail.

Can building regulations drawings be done after planning approval?+

Yes. Many homeowners secure planning permission first, then commission the building regulations package before starting on site. We can pick a project up at either stage.

Are structural calculations included?+

Yes — we produce structural drawings and calculations in-house as part of the building regulations package, so your builder has everything to price and build.

Can you submit to Building Control for me?+

Yes, we prepare and submit the Full Plans package and respond to any Building Control queries.

Do I need planning permission to extend a house on the Becontree Estate?+

Not always. Many Becontree cottages retain permitted development rights, so a modest single-storey rear extension or a rear loft conversion can often proceed without a full planning application. Because the original plots are compact and the estate is uniform, we check your property's size limits and building lines against Barking and Dagenham's controls first, and prepare a full householder application where the project goes beyond permitted development.

Is Becontree in a conservation area?+

No. There is no conservation area covering the Becontree Estate. Its planning character is shaped instead by the estate's uniform interwar cottage layout and Barking and Dagenham's householder design expectations, which favour keeping the original street rhythm, materials and roof form intact when you extend.

How much do planning and building-regulation drawings cost for a Becontree extension?+

We work to fixed fees agreed before we start, with a typical turnaround of around seven days for a standard rear extension or loft on a Becontree cottage. As a chartered architectural technologist practice we produce the same council-accepted planning and building-regulation drawings as an architect, usually for a lower fee, and include free redraws until your application is approved.

How long does Barking & Dagenham Council take to decide?+

The council determines most householder applications within the statutory eight-week period once validated; conservation cases can attract additional consultation. The commonest delay is a validation query, so we prepare submissions to the council's checklist with correctly scaled existing and proposed drawings and a location plan.

Free Fixed Quote

Get your free Becontree planning assessment

Tell us your Becontree (RM9) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.