MCIAT chartered drawings · Fixed fees across all 33 London boroughs and Essex
25 Eccleston Place, Victoria, London SW1W 9NFhello@drawingsdirect.co.uk020 7864 7245WhatsApp

Free 2026 London Planning Report — Building Regulations Drawings in Feltham TW13

Single-storey rear extension on a 1930s semi in Feltham TW13, planning drawings for London Borough of Hounslow approval
Feltham · TW13 · Hounslow

Building Regulations Drawings in Feltham TW13

Fixed-fee, MCIAT-chartered building regulations drawings for Feltham (TW13) homeowners — London Borough of Hounslow validation and local constraints handled from the start.

Free Feltham planning assessment

Tell us your Feltham (TW13) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Feltham is an outer-west Hounslow suburb built largely between the wars and in the post-war decades, so the bulk of our work here is family-driven: single-storey rear extensions, side-return infills and loft conversions on 1930s semis and estate housing. Wide plots on roads such as Southern Avenue and Ashmead Road usually leave comfortable room to extend under permitted development while keeping the front elevation intact.

Where a plot sits near the St Dunstan's or Hanworth Park conservation areas, or on the lower ground close to the River Crane, we design to Hounslow Council's expectations from the outset — matching brick and roof lines, respecting the depth and height limits, and building in flood-resilient drainage detail so the application clears validation without an avoidable refusal.

Single-storey rear extension on a 1930s semi in Feltham TW13, planning drawings for London Borough of Hounslow approval
Isometric illustration of a Feltham TW13 home building regulations drawings design
Proposed floor plan
Feltham TW13

Planning in Feltham (TW13): what to know before you apply

There is no published householder Article 4 direction in Feltham, so most rear and loft projects proceed under permitted development. Watch the St Dunstan's, Hanworth Park and Feltham Town Centre conservation areas, and the flood constraint on plots near the River Crane, where PD rights and extension depths are more tightly read.

Typical Feltham housing stock

Feltham is dominated by 1930s bay-fronted semis and post-war council-built estates, with generous rear gardens on roads like Southern Avenue and Glebelands Road. Plots are wide enough for single-storey rear extensions, side infills and hip-to-gable loft conversions without needing to touch the front elevation.

Streets we regularly draw for in Feltham

Southern Avenue · Glebelands Road · Ashmead Road · Browells Lane

What TW13 is actually built of

Measured from 396 classified residential buildings in TW13, not from a description of the area.

Feltham TW13 housing mix

Residential building form across the TW13 postcode district, from 396 classified buildings.

Attached on more than one side41%
Attached on one side54%
Detached5%
Median building footprint54 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate1.56
Buildings classified396

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-09-22.

Building Regulations Drawings for Feltham (TW13) homes: the package and the process

A Full Plans submission is a technical argument, not a picture. The sheets carry construction build-ups for floors, walls and roof, insulation values and junction details, drainage runs and invert levels, fire escape routes and protected stairs, ventilation provision and the structural elements that carry it all. Building Control checks each against the Approved Documents before work starts.

We draw the engineer's structural design onto the architectural sheets, so the beam sizes on the calculations are the beam sizes on the sections, and the openings your builder prices are the openings that were approved. Where a detail is unusual, we draw it rather than leave it to be resolved on site.

Construction details follow the existing fabric. Solid brick walls, suspended timber floors and uninsulated roofs each need a different build-up to reach the required performance, and a terrace has party wall junctions to detail that a detached house simply does not.

What do building regulations drawings cover?

A building control package translates the approved design into a buildable, compliant specification.

  • Construction sections and detailed junctions
  • Structural drawings and calculations (steel beams, foundations, loadings)
  • Part L thermal performance and insulation specification
  • Fire safety — escape routes, protected structure, alarms
  • Drainage and ventilation layouts

Full Plans or Building Notice — which should I choose?

A Full Plans application has your drawings checked and approved by Building Control before work starts, giving certainty and a document lenders and buyers like to see. A Building Notice lets simpler work start sooner but is inspected as it proceeds, with less up-front certainty. For most London extensions and loft conversions we recommend Full Plans, and prepare the package accordingly. Building regulations are a separate consent from planning permission, and the two are often confused — the explainer on permitted development rights sets out which projects escape a planning application but still need building-regs approval.

Why coordinate structural calculations with the drawings?

When the engineer's steels, padstones and bearings are drawn onto our own sheets, the steel schedule matches the drawings and the builder never waits on a missing detail. It closes the classic gap between one firm's drawings and another firm's calculations that nobody has checked against them.

Full Plans vs Building Notice for a London project
FactorFull PlansBuilding Notice
Drawings checked before work startsYesNo
Up-front certaintyHigh — approval in writingLower — inspected as built
Best forExtensions, lofts, structural workMinor, simple works
Evidence for lenders and buyersFull approval recordCompletion certificate only
Risk of costly on-site reworkLowHigher if issues are found late
Example building regulations drawings sheet showing the existing and proposed arrangement at scale, as we draw it for Feltham (TW13) properties
Example sheet showing how we draw building regulations drawings to London Borough of Hounslow's validation standards for Feltham (TW13) properties.
FAQ

Building Regulations Drawings in Feltham TW13 — FAQs

Do I need building regulations approval as well as planning permission?+
Almost always, yes. Planning permission covers what the building looks like; building regulations cover how safely it is built. Most extensions and loft conversions need both.
How long does Building Control approval take?+
A Full Plans application is typically assessed within about five weeks. We prepare a complete package and respond to any conditions promptly, so approval is not held up by missing detail.
Can building regulations drawings be done after planning approval?+
Yes. Many homeowners secure planning permission first, then commission the building regulations package before starting on site. We can pick a project up at either stage.
Are structural calculations included?+
No, not in the building regulations fee. They are a separate service from £745, prepared by a named, insured engineer, or you can use your own engineer; either way we draw the beams and padstones onto the set so your builder has everything to price and build. Our all-inclusive packages include them.
Can you submit to Building Control for me?+
Yes, we prepare and submit the Full Plans package and respond to any Building Control queries.
Do I need planning permission for an extension in Hounslow?+
It depends on the area. The interwar semis of Osterley, Hounslow and Feltham often retain permitted development rights for rear extensions and lofts, while the Chiswick terraces and Bedford Park sit within conservation areas where those rights are removed. We check your address against the designations first and can confirm permitted development with a Lawful Development Certificate.
What extra control applies in Bedford Park?+
Bedford Park is one of West London's most tightly controlled conservation areas, with detailed control over materials, rooflines, windows and front elevations. Roof enlargements such as dormers, side extensions, rear extensions over one storey and cladding are not permitted development in a conservation area, so we design to the Arts-and-Crafts character here and prepare a full householder application with the elevations and materials the council expects.
Does Heathrow or the river affect my Hounslow project?+
They can. Toward the west of the borough, aircraft-noise considerations near Heathrow may influence habitable-room and glazing design, and along the Thames at Strand-on-the-Green and Isleworth the flood zone must be addressed. We evidence these considerations within the application where they apply so the council can validate and approve without repeated revisions.
How long does Hounslow Council take to decide?+
In Hounslow, a valid application sets eight weeks running from the day after, and only written agreement lengthens them. Bedford Park, conservation and riverside cases can involve additional consultation, so we follow the checklist.
How much do planning drawings cost in Hounslow?+
We agree a fixed fee before starting, taken from our published price list, with free redraws until Hounslow approves. A suburban Osterley extension and a Bedford Park application differ in the evidence required, so we quote once we understand your address and project rather than by the hour.
Free Fixed Quote

Get your free Feltham planning assessment

Tell us your Feltham (TW13) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.