Single-storey rear extension on a 1930s semi in Feltham TW13, planning drawings for London Borough of Hounslow approval

Feltham · TW13 · Hounslow

Architectural Drawings in Feltham TW13

Fixed-fee, MCIAT-chartered architectural drawings for Feltham (TW13) homeowners — London Borough of Hounslow validation and local constraints handled from the start.

Feltham is an outer-west Hounslow suburb built largely between the wars and in the post-war decades, so the bulk of our work here is family-driven: single-storey rear extensions, side-return infills and loft conversions on 1930s semis and estate housing. Wide plots on roads such as Southern Avenue and Ashmead Road usually leave comfortable room to extend under permitted development while keeping the front elevation intact.

Where a plot sits near the St Dunstan's or Hanworth Park conservation areas, or on the lower ground close to the River Crane, we design to Hounslow Council's expectations from the outset — matching brick and roof lines, respecting the depth and height limits, and building in flood-resilient drainage detail so the application clears validation without an avoidable refusal.

Proposed floor plan

Feltham TW13

Feltham (TW13) — planning at a glance

Council: London Borough of Hounslow
Postcode district: TW13
Planning portal: View the Hounslow planning portal
Housing stock: Feltham is dominated by 1930s bay-fronted semis and post-war council-built estates, with generous rear gardens on roads like Southern Avenue and Glebelands Road. Plots are wide enough for single-storey rear extensions, side infills and hip-to-gable loft conversions without needing to touch the front elevation.
Article 4: London Borough of Hounslow does not publish its Article 4 directions to the national planning register, so permitted development rights in Feltham (TW13) can’t be confirmed from open data alone — we check the direction schedule with the council before recommending a route, as part of the fixed fee. No published householder Article 4 across Feltham's interwar and post-war estates — most rear and side extensions sit within permitted development, so the constraint is proximity to the Hanworth Park and St Dunstan's conservation areas rather than a borough-wide direction.
Conservation: Hanworth ParkSt Dunstan'sFeltham Town Centre
Sample streets: Southern Avenue · Glebelands Road · Ashmead Road · Browells Lane
Local constraints: Most of the housing stock is interwar/post-war semi-detached, so party wall agreements with immediate neighbours are the norm for rear and side worksThe St Dunstan's and Hanworth Park conservation areas tighten what is acceptable near the village core and parkland edgeFeltham Town Centre conservation area governs the busier commercial frontages rather than the residential streetsLow-lying ground near the River Crane and Longford River means some plots fall within Environment Agency flood zones and need a drainage-aware design

Planning in Feltham (TW13): what to know before you apply

There is no published householder Article 4 direction in Feltham, so most rear and loft projects proceed under permitted development. Watch the St Dunstan's, Hanworth Park and Feltham Town Centre conservation areas, and the flood constraint on plots near the River Crane, where PD rights and extension depths are more tightly read.

Typical Feltham housing stock

Feltham is dominated by 1930s bay-fronted semis and post-war council-built estates, with generous rear gardens on roads like Southern Avenue and Glebelands Road. Plots are wide enough for single-storey rear extensions, side infills and hip-to-gable loft conversions without needing to touch the front elevation.

Streets we regularly draw for in Feltham

Southern Avenue · Glebelands Road · Ashmead Road · Browells Lane

What TW13 is actually built of

Measured from 396 classified residential buildings in TW13, not from a description of the area.

Feltham TW13 housing mix

Residential building form across the TW13 postcode district, from 396 classified buildings.

Attached on more than one side	41%
Attached on one side	54%
Detached	5%
Median building footprint	54 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	1.56
Buildings classified	396

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Architectural Drawings for Feltham (TW13) homes: the package and the process

The full architectural package has to serve three audiences that want different things from the same building. Planning officers want context, massing and materials; Building Control wants construction, insulation and fire strategy; your builder wants dimensions precise enough to price and set out from. One coordinated model behind all three keeps them agreeing with each other.

That coordination is the part clients notice later. When the planning set and the construction set are drawn from separate sources, the discrepancies surface on site — a beam that will not fit the approved roof line, a window head that has moved. We issue numbered, revision-controlled sheets so everyone is building from the same version.

Building form also sets how much design work there is to do. A detached house can usually take an addition on its own terms, while a terrace has to negotiate two party walls, a shared roof line and a neighbour's windows — the same brief, several times the coordination.

What do architectural drawings include?

A complete architectural package carries your project from idea to buildable detail, so builders quote accurately and councils and Building Control approve confidently.

Concept and feasibility sketches
Planning drawings for the local authority
Building regulations drawings with construction detail
Structural drawings and calculations
Schedules, specifications and material annotations

Architect or architectural technologist — which do I need in London?

For residential planning and building regulations work, an MCIAT-chartered technologist produces the same council-accepted drawings with the same professional accountability as an architect, typically at a lower fee. Councils do not score applications by the author's job title — they score the drawings. The table below compares the two on the factors homeowners actually care about.

What are the stages of an architectural drawing package?

A full architectural package moves through clear stages, each producing drawings you own and can act on. You can stop at any stage — many homeowners take a project to planning approval first, then commission the technical package once they are ready to build.

Concept and feasibility

Sketch options that test what your budget, plot and borough will allow, so you commit to a direction before detailed drawing begins.

Planning drawings

The scaled existing and proposed set your council assesses — floor plans, elevations, sections and site plans formatted to the borough's validation checklist.

Building regulations drawings

The construction-level package: sections, junction details, structural calculations and thermal and fire specification for Building Control.

Construction detail

The final layer of detail and schedules your builder prices and works from on site.

Chartered architectural technologist vs traditional architect for a London home project
Factor	Architectural Technologist	Architect
Council-accepted drawings	Yes	Yes
Typical fee	~30% lower	Higher
Structural coordination	In-house	Often outsourced
Typical drawing turnaround	~7 days	Several weeks
Best for	Extensions, lofts, conversions	Bespoke new-build design

Sheet from a architectural drawings package drawn for a Feltham property in TW13, showing the existing and proposed arrangement at scale — A sheet from the architectural drawings package we submit to London Borough of Hounslow for Feltham (TW13) properties.

Also in Feltham TW13

Planning Permission Planning Drawings Building Regulations Drawings Loft Conversion Drawings House Extension Drawings Architectural Drawings across Hounslow Architectural Drawings across London

FAQ

Architectural Drawings in Feltham TW13 — FAQs

Are architectural drawings the same as planning drawings?+

Planning drawings are a subset of the architectural package — the drawings used specifically for a planning application. The architectural drawings also include building regulations and construction detail.

Will a technologist's drawings be accepted by my council?+

Yes. MCIAT-chartered technologists are a recognised professional body and their drawings are routinely accepted and approved by every London borough.

Can you take my project all the way to construction?+

Yes — from feasibility through planning, building regulations and structural detail, to a set your builder can price and build from.

Do I own the architectural drawings you produce?+

Yes. The drawings are yours to use, and any competent builder can price and build from them — you are never locked into a single contractor by the drawing package.

Can I commission just the planning stage for now?+

Yes. Many homeowners take a project to planning approval first and add the building regulations and construction package later. We stage the fee to match, so you only pay for the stage you need.

Do I need planning permission for an extension in Hounslow?+

It depends on the area. The interwar semis of Osterley, Hounslow and Feltham often retain permitted development rights for rear extensions and lofts, while the Chiswick terraces and Bedford Park sit within conservation areas where those rights are removed. We check your address against the designations first and can confirm permitted development with a Lawful Development Certificate.

What extra control applies in Bedford Park?+

Bedford Park is one of West London's most tightly controlled conservation areas, with detailed control over materials, rooflines, windows and front elevations. A standard permitted-development dormer or cladding change usually won't apply; instead we design to the area's Arts-and-Crafts character and prepare a full householder application with the elevations and materials the council expects.

Does Heathrow or the river affect my Hounslow project?+

They can. Toward the west of the borough, aircraft-noise considerations near Heathrow may influence habitable-room and glazing design, and along the Thames at Strand-on-the-Green and Isleworth the flood zone must be addressed. We evidence these considerations within the application where they apply so the council can validate and approve without repeated revisions.

How long does Hounslow Council take to decide?+

Hounslow determines most householder applications within the statutory eight-week period once validated; Bedford Park, conservation and riverside cases can involve additional consultation. We prepare submissions to the council's validation checklist to avoid the drawing queries that cause most delays.

How much do planning drawings cost in Hounslow?+

We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Hounslow approves. A suburban Osterley extension and a Bedford Park application differ in the evidence required, so we quote once we understand your address and project rather than by the hour.

Free Fixed Quote

Get your free Feltham planning assessment

Tell us your Feltham (TW13) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.