Wraparound Extension Drawings in Hillingdon
Fixed-fee, MCIAT-chartered wraparound extension drawings for Hillingdon homeowners — London Borough of Hillingdon validation and local constraints handled from the start.
Hillingdon is Metro-land in built form: rows of interwar semi-detached and detached houses across Ruislip, Eastcote and Ickenham that lend themselves to hip-to-gable and dormer loft conversions and rear extensions, set against the historic timber-framed core of Ruislip Village and the Colne Valley green belt to the west. These abundant Metro-land semis often retain fuller permitted development rights than inner-London terraces, so a loft or single-storey rear frequently qualifies within the volume limits, though the right route always depends on the plot and its designation.
Unlike much of London, the London Borough of Hillingdon has no borough-wide Article 4 direction affecting typical householder permitted development. The binding constraints are different: Colne Valley green-belt policy toward the western edge and Harefield restricts scale, assessing extensions against strict limits on disproportionate additions to the original dwelling. Conservation control applies in Ruislip Village, Uxbridge (Windsor Street), Northwood, Ickenham Village, Harefield and Eastcote, where permitted development is removed. Toward the south of the borough near Heathrow, aircraft-noise considerations can influence habitable-room and glazing design and need evidencing within the application.
We prepare Hillingdon planning drawings that respect the established Metro-land building line the council expects, checking permitted development eligibility for semi-detached and detached homes first and flagging any conservation, green-belt or aircraft-noise constraint for your address. You get a fixed fee agreed up front, the same council-accepted drawings an architect would produce for usually around 30% less, a roughly seven-day drawing turnaround and free redraws until Hillingdon approves. Most householder applications are determined within the statutory eight weeks once validated, so we work to the council's validation checklist to head off the queries that cause delay.
Planning in Hillingdon: what to know before you apply
Hillingdon has no borough-wide Article 4 direction affecting typical householder permitted development; the binding constraints are Colne Valley green-belt policy to the west, conservation-area control in Ruislip, Uxbridge, Ickenham and Northwood, and aircraft-noise considerations near Heathrow to the south. The borough's abundant Metro-land semis often retain fuller permitted development rights than inner-London terraces.
Typical Hillingdon housing stock
Metro-land interwar semi-detached and detached houses across Ruislip, Eastcote and Ickenham, the historic timber-framed core of Ruislip Village, and green-belt and edge-of-London properties toward Harefield and the Colne Valley.
Areas we regularly draw for in Hillingdon
Uxbridge · Ruislip · Hayes · Hillingdon · Northwood · Ickenham · Eastcote · West Drayton
What the numbers say about Hillingdon planning decisions
These are London Borough of Hillingdon’s own reported figures, published by government rather than estimated by us. They are what we design against — a borough that refuses one householder application in five needs a different drawing package from one that refuses one in twenty.
Permitted development in Hillingdon
Larger householder extensions put to London Borough of Hillingdon under the prior-approval route, and lawful-development certificates decided, over eight quarters.
| Prior approval not requiredWent ahead without a full application | 235 |
|---|---|
| Prior approval granted | 58 |
| Prior approval refused | 23 |
| Granted where a decision was neededFrom 81 determinations | 72% |
| Building upwards, prior approval refused | 0 |
| Certificates of lawful development decided | 1,146 |
Source: Ministry of Housing, Communities and Local Government (PS1 district planning application statistics). Open Government Licence v3.0 Extracted 2026-08-16.
What removes permitted development in Hillingdon
Live entries on the national planning registers for London Borough of Hillingdon. Article 4 directions withdraw permitted development rights, so a project inside one needs a full application rather than prior approval. Revoked and expired entries are excluded.
| Article 4 directions in force | 150 |
|---|---|
| Areas they coverOne direction can cover many separate areas | 150 |
| Conservation areasPermitted development is already narrower inside one | 42 |
Source: MHCLG Planning Data Platform. Open Government Licence v3.0 Extracted 2026-08-16.
Wraparound Extension Drawings for Hillingdon homes: the package and the process
A wraparound is assessed as one addition, so the drawings have to present it as one: a single proposed footprint with the rear depth and the side width both dimensioned, the roof drawn as it turns the corner, and the remaining garden shown on the site plan.
The corner is where the technical work sits. Two roof planes and two structural spans meet at the return, drainage has to get round it, and the internal opening is usually wide enough to need a designed frame rather than a single beam. We resolve that junction on the drawings before it becomes a question on site.
A wraparound needs both a rear garden and a side alley, which in practice means a terrace or end-of-terrace with an outrigger. Where only one of the two exists, the honest answer is a rear extension or a side return — the combined footprint has nowhere to turn the corner.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
Structural design for a wraparound extension
Because the new space turns a corner, the structural frame has to work as one continuous system rather than two independent extensions bolted together.
- A continuous steel or ring-beam frame carrying the roof around the internal corner where the rear and side elements meet
- A glazed roof lantern or rooflight strip often placed at the corner junction, where natural light reaches deepest into the combined plan
- Foundations for both the rear and side elements designed together, so they tie into the existing house consistently
- Bi-fold or sliding doors across the rear elevation, coordinated with the side glazing so the two elements read as one space
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings across Hillingdon
Wraparound Extension Drawings in Hillingdon — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission for a loft conversion in Hillingdon?+
How does the Colne Valley green belt affect my Hillingdon project?+
Does proximity to Heathrow affect my plans?+
How long does Hillingdon Council take to decide?+
How much do planning drawings cost in Hillingdon?+
Get your free Hillingdon planning assessment
Tell us your Hillingdon address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.