Wraparound Extension Drawings in Harrow
Fixed-fee, MCIAT-chartered wraparound extension drawings for Harrow homeowners — London Borough of Harrow validation and local constraints handled from the start.
Harrow is Metro-land in built form: rows of interwar semi-detached and detached houses across Rayners Lane, Kenton, Stanmore and Wealdstone that lend themselves to hip-to-gable and dormer loft conversions and rear extensions. On these homes such work frequently qualifies as permitted development within the volume limits, so a full application is not always needed. The London Borough of Harrow pays close attention to preserving the rhythm and consistent 1930s building line of these suburban streets, and expects extensions to respect the established line and roof form of the neighbouring houses.
The picture changes in the borough's heritage cores. Harrow on the Hill carries a protected heritage setting and long views, and Pinner's medieval high street and Pinner Hill, along with Roxeth and Harrow Weald, are conservation areas where permitted development is often restricted and a full, context-led application is required. Harrow also applies Article 4 directions to HMO conversions in designated wards and to front-boundary and hardstanding works in some areas, so the right route depends on your exact address rather than the house type alone.
We prepare Harrow planning drawings that respect the building line and roof form the borough expects, checking permitted development eligibility for semi-detached and detached homes first and confirming it with a Lawful Development Certificate where the work qualifies. In the conservation areas we design to the character of the area — materials, proportions and rooflines — and evidence the heritage considerations so the submission stands up. The fee is fixed and agreed up front, usually around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Harrow approves. Drawing to the council's validation checklist, and turning drawings around in roughly seven days, keeps most applications inside the statutory eight-week determination without a validation query.
Planning in Harrow: what to know before you apply
Harrow applies Article 4 directions to HMO conversions in designated wards and controls development within Harrow on the Hill and Pinner conservation areas. For the borough's abundant 1930s semis, hip-to-gable lofts and rear extensions frequently qualify as permitted development.
Typical Harrow housing stock
Classic Metro-land interwar semi-detached and detached houses, with the historic hilltop core of Harrow on the Hill and Pinner's medieval high street.
Areas we regularly draw for in Harrow
Harrow · Pinner · Stanmore · Wealdstone · Rayners Lane · Kenton · Hatch End
What the numbers say about Harrow planning decisions
These are London Borough of Harrow’s own reported figures, published by government rather than estimated by us. They are what we design against — a borough that refuses one householder application in five needs a different drawing package from one that refuses one in twenty.
Permitted development in Harrow
Larger householder extensions put to London Borough of Harrow under the prior-approval route, and lawful-development certificates decided, over eight quarters.
| Prior approval not requiredWent ahead without a full application | 617 |
|---|---|
| Prior approval granted | 47 |
| Prior approval refused | 171 |
| Granted where a decision was neededFrom 218 determinations | 22% |
| Building upwards, prior approval refused | 0 |
| Certificates of lawful development decided | 584 |
Source: Ministry of Housing, Communities and Local Government (PS1 district planning application statistics). Open Government Licence v3.0 Extracted 2026-08-16.
What removes permitted development in Harrow
Live entries on the national planning registers for London Borough of Harrow. Article 4 directions withdraw permitted development rights, so a project inside one needs a full application rather than prior approval. Revoked and expired entries are excluded.
| Conservation areasPermitted development is already narrower inside one | 27 |
|---|
Source: MHCLG Planning Data Platform. Open Government Licence v3.0 Extracted 2026-08-16.
Wraparound Extension Drawings for Harrow homes: the package and the process
A wraparound is assessed as one addition, so the drawings have to present it as one: a single proposed footprint with the rear depth and the side width both dimensioned, the roof drawn as it turns the corner, and the remaining garden shown on the site plan.
The corner is where the technical work sits. Two roof planes and two structural spans meet at the return, drainage has to get round it, and the internal opening is usually wide enough to need a designed frame rather than a single beam. We resolve that junction on the drawings before it becomes a question on site.
A wraparound needs both a rear garden and a side alley, which in practice means a terrace or end-of-terrace with an outrigger. Where only one of the two exists, the honest answer is a rear extension or a side return — the combined footprint has nowhere to turn the corner.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
Structural design for a wraparound extension
Because the new space turns a corner, the structural frame has to work as one continuous system rather than two independent extensions bolted together.
- A continuous steel or ring-beam frame carrying the roof around the internal corner where the rear and side elements meet
- A glazed roof lantern or rooflight strip often placed at the corner junction, where natural light reaches deepest into the combined plan
- Foundations for both the rear and side elements designed together, so they tie into the existing house consistently
- Bi-fold or sliding doors across the rear elevation, coordinated with the side glazing so the two elements read as one space
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings across Harrow
Wraparound Extension Drawings in Harrow — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission for a loft conversion in Harrow?+
What does Harrow expect for a rear extension on a 1930s semi?+
Can I extend a home in Harrow on the Hill or Pinner?+
How long does Harrow Council take to decide?+
How much do planning drawings cost in Harrow?+
Get your free Harrow planning assessment
Tell us your Harrow address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.