Wraparound Extension Drawings in Hampstead NW3
Fixed-fee, MCIAT-chartered wraparound extension drawings for Hampstead (NW3) homeowners — London Borough of Camden validation and local constraints handled from the start.
Hampstead (NW3) is, in permitted-development terms, close to a special case. Three conservation areas cover the district — Hampstead, Belsize and Fitzjohns/Netherhall — and Camden has attached a non-immediate Article 4 direction to each of them, on top of the borough-wide Basements direction. The practical effect is that very little in NW3 proceeds under permitted development.
That reshapes what a project looks like here. Basement works need a full application under the Basements direction; the non-immediate Article 4 directions across Hampstead (excluding Frognal Way), Belsize and Fitzjohns/Netherhall strip further rights inside those conservation areas; the village core carries a very high concentration of listed buildings needing listed building consent alongside planning; and because so many of the large Fitzjohns Avenue and Belsize Park villas were long ago converted into flats, a large share of NW3 work is flat alteration — where permitted development rights do not exist in the first place. We establish the designation, listing and tenure position for an NW3 address before drawing to Camden's guidance.
Planning in Hampstead (NW3): what to know before you apply
NW3 is one of the most heavily restricted districts in London for householder work. Camden's Basements Article 4 direction removes permitted development rights for basement schemes, and non-immediate Article 4 directions apply across all three conservation areas — Hampstead (excluding Frognal Way), Belsize and Fitzjohns/Netherhall — removing further rights inside them. The village core has a very high concentration of listed buildings requiring listed building consent, and the widespread conversion of the large villas into flats means many NW3 projects have no permitted development rights regardless of designation. Assume a full application in NW3.
Typical Hampstead housing stock
Georgian houses in the old village core, substantial Victorian red-brick villas along Fitzjohns Avenue and Netherhall Gardens, and large Victorian semi-detached and terraced houses through Belsize Park, much of it converted to flats.
Streets we regularly draw for in Hampstead
Hampstead High Street · Fitzjohns Avenue · Netherhall Gardens · Belsize Park Gardens
What NW3 is actually built of
Measured from 237 classified residential buildings in NW3, not from a description of the area.
Hampstead NW3 housing mix
Residential building form across the NW3 postcode district, from 237 classified buildings.
| Attached on more than one side | 43% |
|---|---|
| Attached on one side | 37% |
| Detached | 20% |
| Median building footprint | 92 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 2.82 |
| Buildings classified | 237 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Wraparound Extension Drawings for Hampstead (NW3) homes: the package and the process
A wraparound is assessed as one addition, so the drawings have to present it as one: a single proposed footprint with the rear depth and the side width both dimensioned, the roof drawn as it turns the corner, and the remaining garden shown on the site plan.
The corner is where the technical work sits. Two roof planes and two structural spans meet at the return, drainage has to get round it, and the internal opening is usually wide enough to need a designed frame rather than a single beam. We resolve that junction on the drawings before it becomes a question on site.
A wraparound needs both a rear garden and a side alley, which in practice means a terrace or end-of-terrace with an outrigger. Where only one of the two exists, the honest answer is a rear extension or a side return — the combined footprint has nowhere to turn the corner.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
Structural design for a wraparound extension
Because the new space turns a corner, the structural frame has to work as one continuous system rather than two independent extensions bolted together.
- A continuous steel or ring-beam frame carrying the roof around the internal corner where the rear and side elements meet
- A glazed roof lantern or rooflight strip often placed at the corner junction, where natural light reaches deepest into the combined plan
- Foundations for both the rear and side elements designed together, so they tie into the existing house consistently
- Bi-fold or sliding doors across the rear elevation, coordinated with the side glazing so the two elements read as one space
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings in Hampstead NW3 — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission for a rear extension in Camden?+
What is a Basement Impact Assessment and will I need one in Camden?+
Can I make changes to a listed building in Camden?+
How long does Camden take to decide an application?+
How much do planning drawings cost in Camden?+
Get your free Hampstead planning assessment
Tell us your Hampstead (NW3) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.