Rear kitchen extension interior for a 1930s semi in Sidcup DA14, London Borough of Bexley

Sidcup · DA14 · Bexley

Side Return Extension Drawings in Sidcup DA14

Fixed-fee, MCIAT-chartered side return extension drawings for Sidcup (DA14) homeowners — London Borough of Bexley validation and local constraints handled from the start.

Sidcup's DA14 streets run from the 1930s semis of the Cray valley to the historic core of Foots Cray village, and most of our work here is rear kitchen extensions and loft conversions that add space to those bay-fronted family homes without losing garden depth.

If your home sits inside the Foots Cray Conservation Area the permitted-development shortcuts narrow, so we always confirm the boundary line first and then advise whether a project runs under permitted development or needs a full householder planning application to Bexley.

Proposed floor plan

Sidcup DA14

Sidcup (DA14) — planning at a glance

Council: London Borough of Bexley
Postcode district: DA14
Planning portal: View the Bexley planning portal
Housing stock: DA14 is dominated by 1930s bay-fronted semis and terraces along the Cray valley, wrapped around the older historic core of Foots Cray village where Victorian and Georgian buildings survive on the High Street. Larger detached and inter-war housing sits on the roads backing onto Foots Cray Meadows.
Article 4: No Article 4 direction is published for the DA14 part of Sidcup, so permitted-development rights apply outside the Foots Cray Conservation Area boundary.
Conservation: Foots Cray Conservation Area
Sample streets: High Street · Rectory Lane · Maidstone Road · Church Road
Local constraints: Foots Cray Conservation Area — rear and side extensions inside the boundary face tighter design scrutiny and lose some permitted-development flexibilityProperties backing onto the Grade II registered Foots Cray Meadows and the River Cray face setting and flood-risk checks on deeper rear extensionsMature TPO tree cover across the Cray valley means many DA14 gardens carry protected trees that constrain extension footprints and foundations

Planning in Sidcup (DA14): what to know before you apply

Most DA14 extensions and lofts outside the conservation area proceed under permitted development or a lawful development certificate. Inside the Foots Cray Conservation Area, or where a home backs onto Foots Cray Meadows or carries protected trees, a full householder planning application to Bexley is the safer route. We check the boundary and tree constraints before recommending either path.

Typical Sidcup housing stock

DA14 is dominated by 1930s bay-fronted semis and terraces along the Cray valley, wrapped around the older historic core of Foots Cray village where Victorian and Georgian buildings survive on the High Street. Larger detached and inter-war housing sits on the roads backing onto Foots Cray Meadows.

Streets we regularly draw for in Sidcup

High Street · Rectory Lane · Maidstone Road · Church Road

What DA14 is actually built of

Measured from 299 classified residential buildings in DA14, not from a description of the area.

Sidcup DA14 housing mix

Residential building form across the DA14 postcode district, from 299 classified buildings.

Attached on more than one side	34%
Attached on one side	53%
Detached	13%
Median building footprint	71 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	1.25
Buildings classified	299

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Side Return Extension Drawings for Sidcup (DA14) homes: the package and the process

A side return is a structural drawing as much as a planning one. Removing the original flank wall to open the kitchen into the infill needs a beam and a padstone detail, and the new roof has to be drawn where it meets both the existing rear elevation and the boundary wall.

The boundary is the sensitive line. The drawings set out where the new wall sits relative to it, how the roof drains without discharging next door, and where rooflights fall so the officer can see the room is lit without overlooking. That detail is also what your party wall surveyor will ask for.

The extension only exists where the alley does. Mid-terrace and end-of-terrace houses with a rear outrigger are the classic case; a semi with a flank path is a different scheme with different boundary questions; and a detached house has no side return to infill at all.

Do I need planning permission for a side return extension in London?

Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.

Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.

What does a side return extension involve?

A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.

New flank wall built out to align with the rear of the house, following the boundary line
Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
Kitchen re-planned across the combined footprint, often incorporating an island once the room widens

Will I need a Party Wall Agreement for a side return extension?

Almost certainly. Because the new side wall is built on or immediately against the boundary with the neighbouring property, the Party Wall etc. Act 1996 applies, and your neighbour must be formally notified before work starts. We prepare the drawings and dimensions your Party Wall surveyor needs, and time the notice period so it runs alongside, rather than after, your planning application.

Side return project options
Package	What it covers	Typical fee
Side return, planning only	Full householder planning application drawings for the infill	Full Planning pack ~£1,600–£2,400
Side return, planning + Building Regulations	Adds structural calculations, Party Wall drawings and construction detail	Planning + Building Regs pack ~£2,200–£3,850
Side return + rear extension (wraparound)	Combines both extensions into one L-shaped ground floor	see Wraparound Extension Drawings
Measured survey only	A measured existing floor-plan set for your own architect, surveyor or builder	from £450

Sheet from a side return extension drawings package drawn for a Sidcup property in DA14, showing the existing and proposed arrangement at scale — A sheet from the side return extension drawings package we submit to London Borough of Bexley for Sidcup (DA14) properties.

Also in Sidcup DA14

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings Side Return Extension Drawings across Bexley Side Return Extension Drawings across London

FAQ

Side Return Extension Drawings in Sidcup DA14 — FAQs

How much does a side return extension cost to design in London?+

Side return drawings start from £1,400. The final fee depends on whether you commission planning drawings alone or a combined planning and building regulations package with structural calculations, all fixed and agreed upfront.

Can I build a side return under permitted development?+

Rarely for a full-width, full-depth side return. Permitted development for side extensions is limited on width and storeys, and most Victorian and Edwardian terraces sit in conservation areas that remove these rights anyway, so a full planning application is the usual route. We still check your specific property first, since some semi-detached and detached houses outside conservation areas retain more generous side-extension allowances.

When do I need to serve Party Wall notice on my neighbour?+

Before work starts, and ideally once your drawings and structural design are settled, since the notice needs accurate dimensions. We can prepare the supporting drawings alongside your planning application so both processes run in parallel.

Do I need an architect for a side return extension?+

No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, so you get the same council-accepted drawings as an architect, for a fixed fee typically around 30% lower, with structural calculations produced in-house.

How long does a side return extension take to design and approve?+

Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period, running alongside your Party Wall notice period.

Do I need planning permission for an extension in Bexley?+

Bexley has no borough-wide Article 4 direction affecting typical householder permitted development, so its semi-detached homes often keep fuller rights than inner-London terraces — larger rear and single-storey extensions can qualify. Conservation areas such as Old Bexley Village and Danson Park, and riverside flood-zone constraints toward Erith, restrict this. We check your address first and can confirm permitted development with a Lawful Development Certificate.

Can I build a bigger extension because Bexley plots are larger?+

Often, yes. The generous interwar plots across Bexleyheath, Sidcup and Welling make substantial rear and double-storey extensions viable where a tight terrace could not. The limit is usually design and amenity policy rather than space. We design to use the plot fully within permitted-development allowances or a well-evidenced full application.

What extra control applies in Old Bexley Village or around Danson Park?+

These conservation areas carry design control over materials, rooflines and front elevations, and the Upton area of Bexleyheath includes the setting of William Morris's Red House. Permitted development is often restricted there, so we design to the area's character and prepare a full, context-led application where a standard permitted-development route doesn't apply.

How long does Bexley Council take to decide?+

Bexley determines most householder applications within the statutory eight-week period once validated; conservation cases can involve additional consultation. A complete, correctly scaled submission is the best way to avoid a validation query — we prepare Bexley drawings to the council's checklist to keep the application on track.

How much do planning drawings cost in Bexley?+

We quote a fixed fee upfront, typically around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Bexley approves. Because plots here allow larger schemes, the fee tracks complexity — a single-storey rear differs from a double-storey — and we confirm it once we understand your plans.

Free Fixed Quote

Get your free Sidcup planning assessment

Tell us your Sidcup (DA14) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.