Side Return Extension Drawings in Shoreditch EC2A
Fixed-fee, MCIAT-chartered side return extension drawings for Shoreditch (EC2A) homeowners — London Borough of Hackney validation and local constraints handled from the start.
Shoreditch around EC2A is defined by its former industrial fabric, brick warehouses, workshops and print buildings now reworked as creative lofts, studios and apartments, with the Arts-and-Crafts Boundary Estate nearby. Projects here lean toward change of use, warehouse-to-residential conversion, roof-level and mansard additions and the reconfiguration of loft apartments rather than the suburban rear extension.
The South Shoreditch and Redchurch Street conservation areas protect this warehouse character closely, so visible roof additions and facade alterations are heavily scrutinised. We prepare Shoreditch drawings to the London Borough of Hackney's conservation and change-of-use standards, coordinating planning, fire and building-regulation detail so conversions and roof schemes stand up first time.
Planning in Shoreditch (EC2A): what to know before you apply
No published householder Article 4 direction governs the EC2A part of Shoreditch, but the South Shoreditch conservation area and change-of-use policy mean nearly all warehouse-conversion, mansard and facade work requires full planning permission with detailed heritage and amenity justification.
Typical Shoreditch housing stock
Shoreditch around EC2A is former industrial and warehouse territory, brick workshops, print buildings and factories now converted into creative lofts, studios and flats, alongside the Arts-and-Crafts Boundary Estate. The work here is less about garden extensions and more about change of use, warehouse-to-residential conversion, roof-level additions and internal loft-apartment reconfiguration.
Streets we regularly draw for in Shoreditch
Worship Street · Columbia Road · Barnet Grove · Galway Street
What the wider borough is built of
EC2A has too few classified residential buildings to publish a district figure of its own, so we do not estimate one. The measured figures below are borough-wide and EC2A is not among the districts they cover.
Borough-wide building mix
Residential building form across 5 of the borough's 6 postcode districts, from 2,243 classified buildings. EC2A is below the publication floor and is excluded from these totals, so they describe the borough around it rather than the district itself.
| Attached on more than one side | 74% |
|---|---|
| Attached on one side | 21% |
| Detached | 5% |
| Buildings attached on more than one side | 1,664 |
| Detached buildings | 107 |
| Buildings classified | 2,243 |
| Postcode districts measured | 5 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Side Return Extension Drawings for Shoreditch (EC2A) homes: the package and the process
A side return is a structural drawing as much as a planning one. Removing the original flank wall to open the kitchen into the infill needs a beam and a padstone detail, and the new roof has to be drawn where it meets both the existing rear elevation and the boundary wall.
The boundary is the sensitive line. The drawings set out where the new wall sits relative to it, how the roof drains without discharging next door, and where rooflights fall so the officer can see the room is lit without overlooking. That detail is also what your party wall surveyor will ask for.
The extension only exists where the alley does. Mid-terrace and end-of-terrace houses with a rear outrigger are the classic case; a semi with a flank path is a different scheme with different boundary questions; and a detached house has no side return to infill at all.
Do I need planning permission for a side return extension in London?
Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.
Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.
What does a side return extension involve?
A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.
- New flank wall built out to align with the rear of the house, following the boundary line
- Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
- Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
- Kitchen re-planned across the combined footprint, often incorporating an island once the room widens
Will I need a Party Wall Agreement for a side return extension?
Almost certainly. Because the new side wall is built on or immediately against the boundary with the neighbouring property, the Party Wall etc. Act 1996 applies, and your neighbour must be formally notified before work starts. We prepare the drawings and dimensions your Party Wall surveyor needs, and time the notice period so it runs alongside, rather than after, your planning application.
| Package | What it covers | Typical fee |
|---|---|---|
| Side return, planning only | Full householder planning application drawings for the infill | Full Planning pack ~£1,600–£2,400 |
| Side return, planning + Building Regulations | Adds structural calculations, Party Wall drawings and construction detail | Planning + Building Regs pack ~£2,200–£3,850 |
| Side return + rear extension (wraparound) | Combines both extensions into one L-shaped ground floor | see Wraparound Extension Drawings |
| Measured survey only | A measured existing floor-plan set for your own architect, surveyor or builder | from £450 |
Side Return Extension Drawings in Shoreditch EC2A — FAQs
How much does a side return extension cost to design in London?+
Can I build a side return under permitted development?+
When do I need to serve Party Wall notice on my neighbour?+
Do I need an architect for a side return extension?+
How long does a side return extension take to design and approve?+
Do I need planning permission for an extension in Hackney?+
My Hackney property is a converted flat — can I still extend?+
What does Hackney's borough-wide HMO Article 4 direction cover?+
How long does Hackney Council take to decide?+
How much do planning drawings cost in Hackney?+
Get your free Shoreditch planning assessment
Tell us your Shoreditch (EC2A) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.