MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportSide Return Extension Drawings in Monken Hadley EN5

Rear kitchen extension interior in a Monken Hadley conservation area house, EN5, London Borough of Barnet
Monken Hadley · EN5 · Barnet

Side Return Extension Drawings in Monken Hadley EN5

Fixed-fee, MCIAT-chartered side return extension drawings for Monken Hadley (EN5) homeowners — London Borough of Barnet validation and local constraints handled from the start.

Free Monken Hadley planning assessment

Tell us your Monken Hadley (EN5) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Monken Hadley is the historic common-edge village at the top of EN5, on the Barnet side of the Enfield boundary, with Georgian and Victorian houses gathered around Hadley Green. Projects here are usually careful rear extensions, garden rooms or internal reworking that keep the period frontages intact.

The Monken Hadley Conservation Area and its Article 4 Direction cover many houses around the green and common, and a number are listed. We check the conservation-area boundary, listing status and Article 4 scope before advising whether anything can proceed as permitted development or needs a full planning and heritage submission.

Rear kitchen extension interior in a Monken Hadley conservation area house, EN5, London Borough of Barnet
Isometric illustration of a Monken Hadley EN5 home side return extension drawings design
Proposed floor plan
Monken Hadley EN5

Planning in Monken Hadley (EN5): what to know before you apply

Most external work in Monken Hadley needs full planning permission with a heritage statement, because the conservation area and Article 4 Direction remove permitted development and many houses are listed. Where a property is listed, separate listed building consent is also required for internal and external alterations.

Typical Monken Hadley housing stock

Georgian and early-Victorian houses and cottages ranged around Hadley Green and the common, many listed, alongside later Victorian villas. Brick and render frontages, sash windows and long rear gardens are typical.

Streets we regularly draw for in Monken Hadley

Hadley Green Road · Hadley Common · Dury Road · Bakers Hill

What EN5 is actually built of

Measured from 438 classified residential buildings in EN5, not from a description of the area.

Monken Hadley EN5 housing mix

Residential building form across the EN5 postcode district, from 438 classified buildings.

Attached on more than one side25%
Attached on one side55%
Detached20%
Median building footprint73 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate1.99
Buildings classified438

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Side Return Extension Drawings for Monken Hadley (EN5) homes: the package and the process

A side return is a structural drawing as much as a planning one. Removing the original flank wall to open the kitchen into the infill needs a beam and a padstone detail, and the new roof has to be drawn where it meets both the existing rear elevation and the boundary wall.

The boundary is the sensitive line. The drawings set out where the new wall sits relative to it, how the roof drains without discharging next door, and where rooflights fall so the officer can see the room is lit without overlooking. That detail is also what your party wall surveyor will ask for.

The extension only exists where the alley does. Mid-terrace and end-of-terrace houses with a rear outrigger are the classic case; a semi with a flank path is a different scheme with different boundary questions; and a detached house has no side return to infill at all.

Do I need planning permission for a side return extension in London?

Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.

Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.

What does a side return extension involve?

A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.

  • New flank wall built out to align with the rear of the house, following the boundary line
  • Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
  • Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
  • Kitchen re-planned across the combined footprint, often incorporating an island once the room widens

Will I need a Party Wall Agreement for a side return extension?

Almost certainly. Because the new side wall is built on or immediately against the boundary with the neighbouring property, the Party Wall etc. Act 1996 applies, and your neighbour must be formally notified before work starts. We prepare the drawings and dimensions your Party Wall surveyor needs, and time the notice period so it runs alongside, rather than after, your planning application.

Side return project options
PackageWhat it coversTypical fee
Side return, planning onlyFull householder planning application drawings for the infillFull Planning pack ~£1,600–£2,400
Side return, planning + Building RegulationsAdds structural calculations, Party Wall drawings and construction detailPlanning + Building Regs pack ~£2,200–£3,850
Side return + rear extension (wraparound)Combines both extensions into one L-shaped ground floorsee Wraparound Extension Drawings
Measured survey onlyA measured existing floor-plan set for your own architect, surveyor or builderfrom £450
Sheet from a side return extension drawings package drawn for a Monken Hadley property in EN5, showing the existing and proposed arrangement at scale
A sheet from the side return extension drawings package we submit to London Borough of Barnet for Monken Hadley (EN5) properties.
FAQ

Side Return Extension Drawings in Monken Hadley EN5 — FAQs

How much does a side return extension cost to design in London?+
Side return drawings start from £1,400. The final fee depends on whether you commission planning drawings alone or a combined planning and building regulations package with structural calculations, all fixed and agreed upfront.
Can I build a side return under permitted development?+
Rarely for a full-width, full-depth side return. Permitted development for side extensions is limited on width and storeys, and most Victorian and Edwardian terraces sit in conservation areas that remove these rights anyway, so a full planning application is the usual route. We still check your specific property first, since some semi-detached and detached houses outside conservation areas retain more generous side-extension allowances.
When do I need to serve Party Wall notice on my neighbour?+
Before work starts, and ideally once your drawings and structural design are settled, since the notice needs accurate dimensions. We can prepare the supporting drawings alongside your planning application so both processes run in parallel.
Do I need an architect for a side return extension?+
No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, so you get the same council-accepted drawings as an architect, for a fixed fee typically around 30% lower, with structural calculations produced in-house.
How long does a side return extension take to design and approve?+
Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period, running alongside your Party Wall notice period.
Do I need planning permission for a loft or extension in Barnet?+
Across Finchley, Edgware and Hendon, Barnet's 1930s semis usually keep permitted development rights for rear extensions and hip-to-gable or dormer lofts, so a full application isn't always needed. The major exception is Hampstead Garden Suburb, where an Article 4 direction removes almost all permitted development rights. We check your address first and confirm permitted development with a Lawful Development Certificate where it applies.
What is different about building in Hampstead Garden Suburb?+
The Suburb has one of the most far-reaching Article 4 directions in London: almost all external alterations need planning permission, and the Hampstead Garden Suburb Trust must also consent to changes in parallel with the council. We handle both tracks — a carefully evidenced planning application to Barnet and the Trust's design requirements — since approval there depends on respecting the Arts-and-Crafts character precisely.
Is a hip-to-gable loft conversion allowed on my Barnet semi?+
Usually, yes. The borough's abundant interwar semis are well suited to hip-to-gable and dormer conversions, which frequently qualify as permitted development on semi-detached homes within the volume limits. Outside conservation areas and the Suburb, this is often the quickest route. We confirm eligibility, then produce the planning and building-regulations drawings.
How long does Barnet take to decide an application?+
Barnet determines most householder applications within the statutory eight-week period once validated; Suburb and conservation cases can involve additional consultation. We prepare Barnet submissions to the validation checklist, with the elevations and materials detail the council expects, to avoid the drawing queries that are the usual cause of delay.
How much do Barnet planning drawings cost?+
We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Barnet approves. A straightforward Finchley loft and a Hampstead Garden Suburb application differ in the evidence required, so we quote once we have seen the project and know which route applies.
Free Fixed Quote

Get your free Monken Hadley planning assessment

Tell us your Monken Hadley (EN5) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.