MCIAT chartered drawings · Fixed fees across all 33 London boroughs
[email protected]020 7864 7245WhatsApp

Free 2026 London Planning Report — Side Return Extension Drawings in East Dulwich SE22

Kitchen side-return extension in a Victorian terrace in East Dulwich SE22, London Borough of Southwark
East Dulwich · SE22 · Southwark

Side Return Extension Drawings in East Dulwich SE22

Fixed-fee, MCIAT-chartered side return extension drawings for East Dulwich (SE22) homeowners — London Borough of Southwark validation and local constraints handled from the start.

Free East Dulwich planning assessment

Tell us your East Dulwich (SE22) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

East Dulwich (SE22) sits in the London Borough of Southwark, tucked between Dulwich Village, Peckham and Forest Hill. Its character comes from the tight grid of late-Victorian and Edwardian terraces — the 'Derbyshire colony' of streets off Lordship Lane, including Melbourne Grove, built in the 1870s and 1880s. Rear, side-return and loft projects on these consistent terraces are the staple here.

The Gardens conservation area lies to the north-east, off East Dulwich Road by Peckham Rye Common, and the Dulwich Village conservation area borders the district to the south, so properties near either boundary answer to heightened design scrutiny. Southwark publishes its Article 4 directions and none covers these householder streets, so many East Dulwich houses keep permitted-development rights — we confirm where an address sits relative to the conservation areas before advising.

Kitchen side-return extension in a Victorian terrace in East Dulwich SE22, London Borough of Southwark
Isometric illustration of a East Dulwich SE22 home side return extension drawings design
Proposed floor plan
East Dulwich SE22

Planning in East Dulwich (SE22): what to know before you apply

Southwark publishes its Article 4 directions and none covers the East Dulwich householder streets, so many houses retain permitted-development rights for rear and loft work. The Gardens conservation area to the north-east and the Dulwich Village conservation area to the south are the controls that matter near those boundaries, and the consistent Victorian and Edwardian terrace frontages mean dormers and elevation changes are judged against the established grain. We check an address against those designations before drawing.

Typical East Dulwich housing stock

Late-Victorian and Edwardian terraces across the 'Derbyshire colony' streets off Lordship Lane — including Melbourne Grove — with grander villas toward Dulwich Village and the houses fronting Peckham Rye.

Streets we regularly draw for in East Dulwich

Lordship Lane · Melbourne Grove · North Cross Road · Barry Road

What SE22 is actually built of

Measured from 359 classified residential buildings in SE22, not from a description of the area.

East Dulwich SE22 housing mix

Residential building form across the SE22 postcode district, from 359 classified buildings.

Attached on more than one side54%
Attached on one side40%
Detached6%
Median building footprint66 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate1.6
Buildings classified359

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Side Return Extension Drawings for East Dulwich (SE22) homes: the package and the process

A side return is a structural drawing as much as a planning one. Removing the original flank wall to open the kitchen into the infill needs a beam and a padstone detail, and the new roof has to be drawn where it meets both the existing rear elevation and the boundary wall.

The boundary is the sensitive line. The drawings set out where the new wall sits relative to it, how the roof drains without discharging next door, and where rooflights fall so the officer can see the room is lit without overlooking. That detail is also what your party wall surveyor will ask for.

The extension only exists where the alley does. Mid-terrace and end-of-terrace houses with a rear outrigger are the classic case; a semi with a flank path is a different scheme with different boundary questions; and a detached house has no side return to infill at all.

Do I need planning permission for a side return extension in London?

Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.

Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.

What does a side return extension involve?

A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.

  • New flank wall built out to align with the rear of the house, following the boundary line
  • Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
  • Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
  • Kitchen re-planned across the combined footprint, often incorporating an island once the room widens

Will I need a Party Wall Agreement for a side return extension?

Almost certainly. Because the new side wall is built on or immediately against the boundary with the neighbouring property, the Party Wall etc. Act 1996 applies, and your neighbour must be formally notified before work starts. We prepare the drawings and dimensions your Party Wall surveyor needs, and time the notice period so it runs alongside, rather than after, your planning application.

Side return project options
PackageWhat it coversTypical fee
Side return, planning onlyFull householder planning application drawings for the infillFull Planning pack ~£1,600–£2,400
Side return, planning + Building RegulationsAdds structural calculations, Party Wall drawings and construction detailPlanning + Building Regs pack ~£2,200–£3,850
Side return + rear extension (wraparound)Combines both extensions into one L-shaped ground floorsee Wraparound Extension Drawings
Measured survey onlyA measured existing floor-plan set for your own architect, surveyor or builderfrom £450
Sheet from a side return extension drawings package drawn for a East Dulwich property in SE22, showing the existing and proposed arrangement at scale
A sheet from the side return extension drawings package we submit to London Borough of Southwark for East Dulwich (SE22) properties.

Also in East Dulwich SE22

Planning PermissionPlanning DrawingsArchitectural DrawingsBuilding Regulations DrawingsLoft Conversion DrawingsSide Return Extension Drawings across SouthwarkSide Return Extension Drawings across London
FAQ

Side Return Extension Drawings in East Dulwich SE22 — FAQs

How much does a side return extension cost to design in London?+
Side return drawings start from £1,400. The final fee depends on whether you commission planning drawings alone or a combined planning and building regulations package with structural calculations, all fixed and agreed upfront.
Can I build a side return under permitted development?+
Rarely for a full-width, full-depth side return. Permitted development for side extensions is limited on width and storeys, and most Victorian and Edwardian terraces sit in conservation areas that remove these rights anyway, so a full planning application is the usual route. We still check your specific property first, since some semi-detached and detached houses outside conservation areas retain more generous side-extension allowances.
When do I need to serve Party Wall notice on my neighbour?+
Before work starts, and ideally once your drawings and structural design are settled, since the notice needs accurate dimensions. We can prepare the supporting drawings alongside your planning application so both processes run in parallel.
Do I need an architect for a side return extension?+
No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, so you get the same council-accepted drawings as an architect, for a fixed fee typically around 30% lower, with structural calculations produced in-house.
How long does a side return extension take to design and approve?+
Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period, running alongside your Party Wall notice period.
Do I need planning permission for an extension in Southwark?+
It depends on the area. On Victorian terraces in Camberwell and Peckham a single-storey rear or side-return extension can fall within permitted development, but conservation areas across Camberwell, Dulwich, Bermondsey and Bankside remove or restrict those rights. We check your address against the designations first and can confirm permitted development with a Lawful Development Certificate where it qualifies.
What is the Dulwich Estate scheme of management?+
It is a distinctive Southwark consideration: many properties on the Dulwich Estate need Dulwich Estate consent in parallel with planning permission, similar in effect to a covenant. It is separate from the council's decision, so both must be satisfied. We flag whether the Estate scheme applies to your property before drawing and design to its requirements as well as the council's.
Can you handle a warehouse or riverside conversion in Bermondsey or Bankside?+
Yes. Southwark's riverside quarters carry their own townscape and taller-building context, and conversions there are assessed against conservation and design control near the Thames. We prepare drawings that respond to that setting and the council's design expectations, confirming the constraints for your specific building before design begins.
How long does Southwark Council take to decide?+
Southwark determines most householder applications within the statutory eight-week period once validated; Dulwich, conservation and riverside cases can involve additional consultation. We prepare submissions to the council's validation checklist to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Southwark?+
We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Southwark approves. A Camberwell terrace extension and a Dulwich Estate application differ in the evidence required, so we quote once we have seen your address and project rather than by the hour.
Free Fixed Quote

Get your free East Dulwich planning assessment

Tell us your East Dulwich (SE22) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.