MCIAT chartered drawings · Fixed fees across all 33 London boroughs
[email protected]020 7864 7245WhatsApp

Free 2026 London Planning Report — Side Return Extension Drawings in Catford SE6

Dormer loft conversion on an Edwardian Corbett Estate terrace in Catford SE6, London Borough of Lewisham
Catford · SE6 · Lewisham

Side Return Extension Drawings in Catford SE6

Fixed-fee, MCIAT-chartered side return extension drawings for Catford (SE6) homeowners — London Borough of Lewisham validation and local constraints handled from the start.

Free Catford planning assessment

Tell us your Catford (SE6) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Catford (SE6) in Lewisham is defined by its consistent Edwardian estates — above all the Culverley Green conservation area and the neighbouring Corbett Estate, whose uniform terraces give the area a strong, coherent character. That consistency is exactly what the planning controls here are designed to protect.

The Culverley Green conservation area carries an Article 4 direction controlling householder alterations, and the wider Corbett Estate streets are assessed for their uniform Edwardian frontages, so dormers, extensions and elevation changes need to respect the established pattern. Lewisham's small-HMO Article 4 direction adds a control on conversions. We design Catford schemes to fit that grain.

Dormer loft conversion on an Edwardian Corbett Estate terrace in Catford SE6, London Borough of Lewisham
Isometric illustration of a Catford SE6 home side return extension drawings design
Proposed floor plan
Catford SE6

Planning in Catford (SE6): what to know before you apply

SE6's Culverley Green conservation area carries an Article 4 direction that controls householder alterations within the Edwardian estate, and the surrounding Corbett Estate is valued for its uniform frontages — so extension and loft designs in Catford are judged closely against the established Edwardian pattern. Lewisham's borough small-HMO Article 4 direction is a further control on conversions.

Typical Catford housing stock

The consistent Edwardian terraces of the Culverley Green and Corbett Estate streets, interwar semi-detached houses toward Bellingham, and Victorian and Edwardian housing around Rushey Green and the town centre.

Streets we regularly draw for in Catford

Rushey Green · Bromley Road · Culverley Road · Torridon Road

What SE6 is actually built of

Measured from 511 classified residential buildings in SE6, not from a description of the area.

Catford SE6 housing mix

Residential building form across the SE6 postcode district, from 511 classified buildings.

Attached on more than one side50%
Attached on one side48%
Detached2%
Median building footprint61 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate1.47
Buildings classified511

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Side Return Extension Drawings for Catford (SE6) homes: the package and the process

A side return is a structural drawing as much as a planning one. Removing the original flank wall to open the kitchen into the infill needs a beam and a padstone detail, and the new roof has to be drawn where it meets both the existing rear elevation and the boundary wall.

The boundary is the sensitive line. The drawings set out where the new wall sits relative to it, how the roof drains without discharging next door, and where rooflights fall so the officer can see the room is lit without overlooking. That detail is also what your party wall surveyor will ask for.

The extension only exists where the alley does. Mid-terrace and end-of-terrace houses with a rear outrigger are the classic case; a semi with a flank path is a different scheme with different boundary questions; and a detached house has no side return to infill at all.

Do I need planning permission for a side return extension in London?

Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.

Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.

What does a side return extension involve?

A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.

  • New flank wall built out to align with the rear of the house, following the boundary line
  • Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
  • Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
  • Kitchen re-planned across the combined footprint, often incorporating an island once the room widens

Will I need a Party Wall Agreement for a side return extension?

Almost certainly. Because the new side wall is built on or immediately against the boundary with the neighbouring property, the Party Wall etc. Act 1996 applies, and your neighbour must be formally notified before work starts. We prepare the drawings and dimensions your Party Wall surveyor needs, and time the notice period so it runs alongside, rather than after, your planning application.

Side return project options
PackageWhat it coversTypical fee
Side return, planning onlyFull householder planning application drawings for the infillFull Planning pack ~£1,600–£2,400
Side return, planning + Building RegulationsAdds structural calculations, Party Wall drawings and construction detailPlanning + Building Regs pack ~£2,200–£3,850
Side return + rear extension (wraparound)Combines both extensions into one L-shaped ground floorsee Wraparound Extension Drawings
Measured survey onlyA measured existing floor-plan set for your own architect, surveyor or builderfrom £450
Sheet from a side return extension drawings package drawn for a Catford property in SE6, showing the existing and proposed arrangement at scale
A sheet from the side return extension drawings package we submit to London Borough of Lewisham for Catford (SE6) properties.

Also in Catford SE6

Planning PermissionPlanning DrawingsArchitectural DrawingsBuilding Regulations DrawingsLoft Conversion DrawingsSide Return Extension Drawings across LewishamSide Return Extension Drawings across London
FAQ

Side Return Extension Drawings in Catford SE6 — FAQs

How much does a side return extension cost to design in London?+
Side return drawings start from £1,400. The final fee depends on whether you commission planning drawings alone or a combined planning and building regulations package with structural calculations, all fixed and agreed upfront.
Can I build a side return under permitted development?+
Rarely for a full-width, full-depth side return. Permitted development for side extensions is limited on width and storeys, and most Victorian and Edwardian terraces sit in conservation areas that remove these rights anyway, so a full planning application is the usual route. We still check your specific property first, since some semi-detached and detached houses outside conservation areas retain more generous side-extension allowances.
When do I need to serve Party Wall notice on my neighbour?+
Before work starts, and ideally once your drawings and structural design are settled, since the notice needs accurate dimensions. We can prepare the supporting drawings alongside your planning application so both processes run in parallel.
Do I need an architect for a side return extension?+
No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, so you get the same council-accepted drawings as an architect, for a fixed fee typically around 30% lower, with structural calculations produced in-house.
How long does a side return extension take to design and approve?+
Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period, running alongside your Party Wall notice period.
Do I need planning permission for a side-return extension in Lewisham?+
On the Victorian and Edwardian terraces of Brockley, Forest Hill and Hither Green a single-storey side-return or rear extension can fall within permitted development, so a full application isn't always needed. Conservation areas such as Blackheath, Brockley and Telegraph Hill restrict this. We check your street's designation first and can confirm permitted development with a Lawful Development Certificate where it qualifies.
What does Lewisham's borough-wide HMO Article 4 direction affect?+
Lewisham applies a borough-wide Article 4 direction removing permitted development rights for change of use to an HMO (C3 to C4), so a conversion to a house in multiple occupation needs a full application anywhere in the borough. It doesn't affect a standard family extension or loft, but we confirm whether it applies to your intended use before advising on a route.
Can I convert the loft on my Lewisham terrace?+
Usually, yes. The terraces of Brockley, Forest Hill and Hither Green suit hip-to-gable and dormer loft conversions, which frequently qualify as permitted development within the volume limits. Outside the conservation areas this is often the quickest route. We confirm eligibility against those limits and any designation, then produce the planning and building-regulations drawings.
How long does Lewisham Council take to decide?+
Lewisham determines most householder applications within the statutory eight-week period once validated; conservation cases can attract additional consultation. The dense terraced streets are party-wall-sensitive, so the commonest delay is a drawing query — we prepare submissions to the council's validation checklist to keep them moving.
How much do planning drawings cost in Lewisham?+
We agree a fixed fee before starting, usually around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Lewisham approves. A side-return, a loft and a conservation-area scheme differ in complexity, so we quote once we understand your street and project rather than charging by the hour.
Free Fixed Quote

Get your free Catford planning assessment

Tell us your Catford (SE6) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.