MCIAT chartered drawings · Fixed fees across all 33 London boroughs
[email protected]020 7864 7245WhatsApp

Free 2026 London Planning Report — Side Return Extension Drawings in Barkingside IG6

Kitchen extension interior with rear glazing in a Barkingside IG6 inter-war semi, London Borough of Redbridge
Barkingside · IG6 · Redbridge

Side Return Extension Drawings in Barkingside IG6

Fixed-fee, MCIAT-chartered side return extension drawings for Barkingside (IG6) homeowners — London Borough of Redbridge validation and local constraints handled from the start.

Free Barkingside planning assessment

Tell us your Barkingside (IG6) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Barkingside (IG6) is a largely inter-war suburb, so most of the district's rear extensions, lofts and side infills sit on ordinary 1920s and 1930s semi-detached and terraced stock outside any heritage designation. That gives many IG6 houses reasonable permitted-development scope for household projects.

At its heart, though, is the Barnardo's Village conservation area on Tanners Lane — the surviving part of Dr Barnardo's Girls' Village Home, a horseshoe of Grade II-listed cottage homes built between 1876 and 1895 around a village green. Anything affecting those listed cottages or their setting needs listed-building consent as well as planning permission, a far tighter process than the surrounding streets.

Kitchen extension interior with rear glazing in a Barkingside IG6 inter-war semi, London Borough of Redbridge
Isometric illustration of a Barkingside IG6 home side return extension drawings design
Proposed floor plan
Barkingside IG6

Planning in Barkingside (IG6): what to know before you apply

Redbridge keeps its Article 4 directions off planning.data.gov.uk, so we verify each IG6 address against the council's conservation-area and listed-building layers directly. The Barnardo's Village conservation area carries both conservation-area control and Grade II listings, so projects there are exceptional; across the wider inter-war suburb, standard rear and loft work is generally well supported.

Typical Barkingside housing stock

Mainly 1920s-1930s suburban semis and terraces typical of outer Redbridge, wrapped around the Barnardo's Village conservation area on Tanners Lane — a horseshoe of Grade II-listed cottage homes built for Dr Barnardo between 1876 and 1895 around a village green, with the Children's Church and Cairns House.

Streets we regularly draw for in Barkingside

Tanners Lane · Barnardo Drive · Horns Road · Fremantle Road · Mossford Green

What IG6 is actually built of

Measured from 275 classified residential buildings in IG6, not from a description of the area.

Barkingside IG6 housing mix

Residential building form across the IG6 postcode district, from 275 classified buildings.

Attached on more than one side53%
Attached on one side40%
Detached7%
Median building footprint63 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate1.37
Buildings classified275

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Side Return Extension Drawings for Barkingside (IG6) homes: the package and the process

A side return is a structural drawing as much as a planning one. Removing the original flank wall to open the kitchen into the infill needs a beam and a padstone detail, and the new roof has to be drawn where it meets both the existing rear elevation and the boundary wall.

The boundary is the sensitive line. The drawings set out where the new wall sits relative to it, how the roof drains without discharging next door, and where rooflights fall so the officer can see the room is lit without overlooking. That detail is also what your party wall surveyor will ask for.

The extension only exists where the alley does. Mid-terrace and end-of-terrace houses with a rear outrigger are the classic case; a semi with a flank path is a different scheme with different boundary questions; and a detached house has no side return to infill at all.

Do I need planning permission for a side return extension in London?

Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.

Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.

What does a side return extension involve?

A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.

  • New flank wall built out to align with the rear of the house, following the boundary line
  • Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
  • Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
  • Kitchen re-planned across the combined footprint, often incorporating an island once the room widens

Will I need a Party Wall Agreement for a side return extension?

Almost certainly. Because the new side wall is built on or immediately against the boundary with the neighbouring property, the Party Wall etc. Act 1996 applies, and your neighbour must be formally notified before work starts. We prepare the drawings and dimensions your Party Wall surveyor needs, and time the notice period so it runs alongside, rather than after, your planning application.

Side return project options
PackageWhat it coversTypical fee
Side return, planning onlyFull householder planning application drawings for the infillFull Planning pack ~£1,600–£2,400
Side return, planning + Building RegulationsAdds structural calculations, Party Wall drawings and construction detailPlanning + Building Regs pack ~£2,200–£3,850
Side return + rear extension (wraparound)Combines both extensions into one L-shaped ground floorsee Wraparound Extension Drawings
Measured survey onlyA measured existing floor-plan set for your own architect, surveyor or builderfrom £450
Sheet from a side return extension drawings package drawn for a Barkingside property in IG6, showing the existing and proposed arrangement at scale
A sheet from the side return extension drawings package we submit to London Borough of Redbridge for Barkingside (IG6) properties.

Also in Barkingside IG6

Planning PermissionPlanning DrawingsArchitectural DrawingsBuilding Regulations DrawingsLoft Conversion DrawingsSide Return Extension Drawings across RedbridgeSide Return Extension Drawings across London
FAQ

Side Return Extension Drawings in Barkingside IG6 — FAQs

How much does a side return extension cost to design in London?+
Side return drawings start from £1,400. The final fee depends on whether you commission planning drawings alone or a combined planning and building regulations package with structural calculations, all fixed and agreed upfront.
Can I build a side return under permitted development?+
Rarely for a full-width, full-depth side return. Permitted development for side extensions is limited on width and storeys, and most Victorian and Edwardian terraces sit in conservation areas that remove these rights anyway, so a full planning application is the usual route. We still check your specific property first, since some semi-detached and detached houses outside conservation areas retain more generous side-extension allowances.
When do I need to serve Party Wall notice on my neighbour?+
Before work starts, and ideally once your drawings and structural design are settled, since the notice needs accurate dimensions. We can prepare the supporting drawings alongside your planning application so both processes run in parallel.
Do I need an architect for a side return extension?+
No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, so you get the same council-accepted drawings as an architect, for a fixed fee typically around 30% lower, with structural calculations produced in-house.
How long does a side return extension take to design and approve?+
Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period, running alongside your Party Wall notice period.
Do I need planning permission for a loft conversion in Redbridge?+
On the Edwardian and interwar semis of Wanstead, Woodford and Barkingside, hip-to-gable and dormer lofts frequently qualify as permitted development within the volume limits, so a full application isn't always needed. Conservation areas such as Wanstead, Snaresbrook and the Ilford Garden Suburb restrict this. We check your street first and can confirm permitted development with a Lawful Development Certificate.
What does Redbridge's borough-wide HMO Article 4 direction affect?+
Redbridge applies a borough-wide Article 4 direction removing permitted development rights for change of use to an HMO (C3 to C4), so a conversion to a house in multiple occupation needs a full application anywhere in the borough. It doesn't affect a standard family extension or loft, but we confirm whether it applies to your intended use before advising.
What does the council expect for an extension in Wanstead or Woodford?+
The council pays close attention to preserving the rhythm and building line of its Edwardian and interwar suburban streets, so extensions are expected to respect the established line and roof form. Many single-storey rear extensions still fall within permitted development; where a full application is needed, we design to the borough's residential guidance so it validates and approves without repeated revisions.
How long does Redbridge Council take to decide?+
Redbridge determines most householder applications within the statutory eight-week period once validated; conservation cases can attract additional consultation. The commonest delay is a validation query, so we prepare Redbridge submissions to the council's checklist with correctly scaled existing and proposed drawings and a location plan.
How much do planning drawings cost in Redbridge?+
We work to a fixed fee agreed upfront, usually around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Redbridge approves. The figure depends on the scheme — a dormer loft differs from a double-storey extension — so we confirm it once we understand your project rather than billing by the hour.
Free Fixed Quote

Get your free Barkingside planning assessment

Tell us your Barkingside (IG6) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.