MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportRear Extension Drawings in Wallington SM6

Single-storey rear extension onto a leafy garden behind a Victorian–interwar Wallington SM6 semi-detached house in Sutton
Wallington · SM6 · Sutton

Rear Extension Drawings in Wallington SM6

Fixed-fee, MCIAT-chartered rear extension drawings for Wallington (SM6) homeowners — London Borough of Sutton validation and local constraints handled from the start.

Free Wallington planning assessment

Tell us your Wallington (SM6) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Wallington (SM6) is a leafy railway suburb that grew from a village after the line arrived in 1847, developing through the late-Victorian, Edwardian and interwar years into wide, tree-lined residential avenues with a garden-suburb feel. Householder work here is overwhelmingly rear extensions, side infills and loft conversions on those detached and semi-detached houses, so drawings need to sit comfortably within spacious, well-planted streets.

There is no conservation area covering Wallington — that is a genuine, verified fact, not an omission. Its planning character is instead shaped by the leafy suburban layout: wide avenues, front-garden setbacks, generous plots and the spacing between houses, all read against the London Borough of Sutton's householder design expectations. We treat that verdant suburban grain, rather than a conservation designation, as the reference point when we design an extension.

Because the plots are deep and well-planted, demand for rear extensions and loft conversions is steady along roads like North Avenue, Brambledown Road and Woodfield Avenue. We check each property's permitted-development position — and any protected trees — against Sutton's borough-wide controls first, then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.

Single-storey rear extension onto a leafy garden behind a Victorian–interwar Wallington SM6 semi-detached house in Sutton
Isometric illustration of a Wallington SM6 home rear extension drawings design
Proposed floor plan
Wallington SM6

Planning in Wallington (SM6): what to know before you apply

Sutton assesses Wallington extensions against the leafy, spacious suburban pattern, so matching original brick, render and roof form and respecting the gaps and gardens between houses matters more than on a tightly built road. There is no conservation area and no local Article 4 direction, so many houses retain permitted development rights for rear and loft work — but two-storey side additions, protected trees and neighbour amenity are the points a householder application is judged on.

Typical Wallington housing stock

Late-Victorian, Edwardian and interwar detached and semi-detached houses on generous, well-planted plots along wide residential avenues. The deep gardens and spacious layouts are what make rear extensions and loft conversions such common projects across the district.

Streets we regularly draw for in Wallington

North Avenue · Windborough Road · Brambledown Road · Dalmeny Road · Anglesey Gardens · Woodfield Avenue · Northwood Road · Grosvenor Avenue · Beddington Gardens · Link Lane · Demesne Road · Eastway

What SM6 is actually built of

Measured from 144 classified residential buildings in SM6, not from a description of the area.

Wallington SM6 housing mix

Residential building form across the SM6 postcode district, from 144 classified buildings.

Attached on more than one side34%
Attached on one side44%
Detached22%
Median building footprint71 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate1.51
Buildings classified144

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Rear Extension Drawings for Wallington (SM6) homes: the package and the process

Depth is the number the application turns on, and it has to be measured from the original rear wall of the house rather than from whatever is there now. The drawings carry that dimension, the eaves and ridge heights, the position of any rooflight, and the boundary distances on both sides.

Where the scheme goes beyond the standard allowance and relies on the larger home extension route, the drawings serve a second purpose: they are what the council sends to the neighbours during the consultation. A clear, dimensioned proposed elevation answers the objection about overshadowing before it is made.

Depth is limited by the plot as much as by the rules. A long garden behind a terrace can take the full allowance, while a short one runs out before the rules do — and on a semi or detached house the same depth reads very differently from the boundary.

Do I need planning permission for a rear extension in London?

Many single-storey rear extensions qualify as permitted development, meaning no planning application is needed, provided depth, height and materials stay within set limits. That changes if your property sits in a conservation area or is subject to an Article 4 direction, both of which can remove permitted development rights across a street or borough — in that case a full householder planning application is required regardless of size.

Even where an extension qualifies, most homeowners obtain a Lawful Development Certificate to confirm that status in writing before building — useful for mortgage lenders, buyers and Building Control. We check your property against your borough's constraints before recommending a route.

How deep can a single-storey rear extension go?

Depth is the main constraint on a rear extension, and it depends on your house type and whether you use standard permitted development or the larger home extension scheme.

Permitted development

Standard permitted development allows a single-storey rear extension up to 3 metres deep for terraced and semi-detached houses, or 4 metres for detached houses, generally with eaves height limited to match or stay close to the existing house.

Larger home extension scheme

The prior-approval scheme extends this to 6 metres for terraced and semi-detached houses and 8 metres for detached houses. Your council writes to affected neighbours; if none object within the notification period, approval follows without a full planning application. If an objection is raised, the council assesses the impact on neighbouring light and outlook itself, rather than automatically refusing, so a well-considered design still has a good chance of approval.

Designing the kitchen-diner: rooflights, bi-folds and daylight

Most rear extensions exist to create one open-plan kitchen, dining and living space, so the drawing work focuses on getting light and flow right within the depth you are allowed.

  • Structural opening sized for bi-fold or sliding doors across most of the rear elevation
  • Rooflights or a roof lantern positioned to light the centre of the room, away from the shadow line of the main house
  • Open-plan layout tested against the 45-degree rule, which protects daylight to your neighbours' windows and can limit how close a flank wall or roof comes to the boundary
  • Floor build-up and threshold detail coordinated so the new floor meets the existing one without a step
Rear extension routes at a glance
RouteWhen it appliesTypical fee
Permitted development (Lawful Development Certificate)Depth within 3m (terraced/semi) or 4m (detached), height and materials within PD limitsPD/LDC pack ~£950–£1,450
Larger home extension (prior approval)Depth up to 6m (terraced/semi) or 8m (detached), with neighbour notificationfrom £1,100
Full householder planning permissionExtension exceeds PD/larger-home limits, or the property is in a conservation area with an Article 4 directionFull Planning pack ~£1,600–£2,400
Planning + Building Regulations (structural)Combined planning and construction-ready pack with structural calculations for the opening and roofPlanning + Building Regs pack ~£2,200–£3,850
Sheet from a rear extension drawings package drawn for a Wallington property in SM6, showing the existing and proposed arrangement at scale
A sheet from the rear extension drawings package we submit to London Borough of Sutton for Wallington (SM6) properties.
FAQ

Rear Extension Drawings in Wallington SM6 — FAQs

How much does a rear extension cost to design in London?+
Rear extension drawings start from £1,100, with the final fee set by the route your extension takes — permitted development, prior approval or full planning — and whether you need building regulations and structural calculations bundled in. The fee is fixed and agreed upfront.
Do I need an architect for a rear extension?+
No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, producing the same council-accepted drawings as an architect for a fixed fee typically around 30% lower.
How long does it take to get rear extension drawings?+
Drawings are typically ready around 7 days from survey. Once submitted, councils have a statutory 8-week period to determine a standard householder planning application.
What is the 45-degree rule?+
It is a daylight test many London councils apply to check that a rear extension does not block too much light to a neighbour's nearest window, measured as a line drawn at 45 degrees from that window. We check it before submission, not after a refusal.
Will I need a Party Wall Agreement for a rear extension?+
Only if your foundations or new walls sit on or near the boundary with a neighbouring property. A straightforward rear extension set within your own plot often does not trigger the Party Wall etc. Act 1996, unlike a Side Return or Wraparound extension, which usually does.
Do I need planning permission to extend a house in Wallington?+
Not always. Many Wallington houses retain permitted development rights, so a single-storey rear extension or a rear loft conversion can often proceed without a full planning application. Because the plots are generous and often well-planted, we check your property's limits — and any protected trees — against Sutton's controls first, and prepare a full householder application where the project, such as a two-storey side extension, goes beyond permitted development.
Is Wallington in a conservation area?+
No. There is no conservation area covering Wallington. Its planning character is shaped instead by the leafy railway-suburb layout — wide tree-lined avenues, generous plots and the spacing between houses — and by Sutton's householder design expectations, which favour keeping that spacious garden-suburb grain when you extend.
How much do planning and building-regulation drawings cost for a Wallington extension?+
We work to fixed fees agreed before we start, with a typical turnaround of around seven days for a standard rear extension or loft on a Wallington house. As a chartered architectural technologist practice we produce the same council-accepted planning and building-regulation drawings as an architect, usually for a lower fee, and include free redraws until your application is approved.
How long does Sutton Council take to decide?+
Sutton determines most householder applications within the statutory eight-week period once validated; conservation cases can involve additional consultation. A complete, correctly scaled submission is the best way to avoid a validation query — we prepare Sutton drawings to the council's checklist to keep the application on track.
Free Fixed Quote

Get your free Wallington planning assessment

Tell us your Wallington (SM6) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.