Rear Extension Drawings in Hillingdon
Fixed-fee, MCIAT-chartered rear extension drawings for Hillingdon homeowners — London Borough of Hillingdon validation and local constraints handled from the start.
Hillingdon is Metro-land in built form: rows of interwar semi-detached and detached houses across Ruislip, Eastcote and Ickenham that lend themselves to hip-to-gable and dormer loft conversions and rear extensions, set against the historic timber-framed core of Ruislip Village and the Colne Valley green belt to the west. These abundant Metro-land semis often retain fuller permitted development rights than inner-London terraces, so a loft or single-storey rear frequently qualifies within the volume limits, though the right route always depends on the plot and its designation.
Unlike much of London, the London Borough of Hillingdon has no borough-wide Article 4 direction affecting typical householder permitted development. The binding constraints are different: Colne Valley green-belt policy toward the western edge and Harefield restricts scale, assessing extensions against strict limits on disproportionate additions to the original dwelling. Conservation control applies in Ruislip Village, Uxbridge (Windsor Street), Northwood, Ickenham Village, Harefield and Eastcote, where permitted development is removed. Toward the south of the borough near Heathrow, aircraft-noise considerations can influence habitable-room and glazing design and need evidencing within the application.
We prepare Hillingdon planning drawings that respect the established Metro-land building line the council expects, checking permitted development eligibility for semi-detached and detached homes first and flagging any conservation, green-belt or aircraft-noise constraint for your address. You get a fixed fee agreed up front, the same council-accepted drawings an architect would produce for usually around 30% less, a roughly seven-day drawing turnaround and free redraws until Hillingdon approves. Most householder applications are determined within the statutory eight weeks once validated, so we work to the council's validation checklist to head off the queries that cause delay.
Planning in Hillingdon: what to know before you apply
Hillingdon has no borough-wide Article 4 direction affecting typical householder permitted development; the binding constraints are Colne Valley green-belt policy to the west, conservation-area control in Ruislip, Uxbridge, Ickenham and Northwood, and aircraft-noise considerations near Heathrow to the south. The borough's abundant Metro-land semis often retain fuller permitted development rights than inner-London terraces.
Typical Hillingdon housing stock
Metro-land interwar semi-detached and detached houses across Ruislip, Eastcote and Ickenham, the historic timber-framed core of Ruislip Village, and green-belt and edge-of-London properties toward Harefield and the Colne Valley.
Areas we regularly draw for in Hillingdon
Uxbridge · Ruislip · Hayes · Hillingdon · Northwood · Ickenham · Eastcote · West Drayton
What the numbers say about Hillingdon planning decisions
These are London Borough of Hillingdon’s own reported figures, published by government rather than estimated by us. They are what we design against — a borough that refuses one householder application in five needs a different drawing package from one that refuses one in twenty.
Permitted development in Hillingdon
Larger householder extensions put to London Borough of Hillingdon under the prior-approval route, and lawful-development certificates decided, over eight quarters.
| Prior approval not requiredWent ahead without a full application | 235 |
|---|---|
| Prior approval granted | 58 |
| Prior approval refused | 23 |
| Granted where a decision was neededFrom 81 determinations | 72% |
| Building upwards, prior approval refused | 0 |
| Certificates of lawful development decided | 1,146 |
Source: Ministry of Housing, Communities and Local Government (PS1 district planning application statistics). Open Government Licence v3.0 Extracted 2026-08-16.
What removes permitted development in Hillingdon
Live entries on the national planning registers for London Borough of Hillingdon. Article 4 directions withdraw permitted development rights, so a project inside one needs a full application rather than prior approval. Revoked and expired entries are excluded.
| Article 4 directions in force | 150 |
|---|---|
| Areas they coverOne direction can cover many separate areas | 150 |
| Conservation areasPermitted development is already narrower inside one | 42 |
Source: MHCLG Planning Data Platform. Open Government Licence v3.0 Extracted 2026-08-16.
Rear Extension Drawings for Hillingdon homes: the package and the process
Depth is the number the application turns on, and it has to be measured from the original rear wall of the house rather than from whatever is there now. The drawings carry that dimension, the eaves and ridge heights, the position of any rooflight, and the boundary distances on both sides.
Where the scheme goes beyond the standard allowance and relies on the larger home extension route, the drawings serve a second purpose: they are what the council sends to the neighbours during the consultation. A clear, dimensioned proposed elevation answers the objection about overshadowing before it is made.
Depth is limited by the plot as much as by the rules. A long garden behind a terrace can take the full allowance, while a short one runs out before the rules do — and on a semi or detached house the same depth reads very differently from the boundary.
Do I need planning permission for a rear extension in London?
Many single-storey rear extensions qualify as permitted development, meaning no planning application is needed, provided depth, height and materials stay within set limits. That changes if your property sits in a conservation area or is subject to an Article 4 direction, both of which can remove permitted development rights across a street or borough — in that case a full householder planning application is required regardless of size.
Even where an extension qualifies, most homeowners obtain a Lawful Development Certificate to confirm that status in writing before building — useful for mortgage lenders, buyers and Building Control. We check your property against your borough's constraints before recommending a route.
How deep can a single-storey rear extension go?
Depth is the main constraint on a rear extension, and it depends on your house type and whether you use standard permitted development or the larger home extension scheme.
Permitted development
Standard permitted development allows a single-storey rear extension up to 3 metres deep for terraced and semi-detached houses, or 4 metres for detached houses, generally with eaves height limited to match or stay close to the existing house.
Larger home extension scheme
The prior-approval scheme extends this to 6 metres for terraced and semi-detached houses and 8 metres for detached houses. Your council writes to affected neighbours; if none object within the notification period, approval follows without a full planning application. If an objection is raised, the council assesses the impact on neighbouring light and outlook itself, rather than automatically refusing, so a well-considered design still has a good chance of approval.
Designing the kitchen-diner: rooflights, bi-folds and daylight
Most rear extensions exist to create one open-plan kitchen, dining and living space, so the drawing work focuses on getting light and flow right within the depth you are allowed.
- Structural opening sized for bi-fold or sliding doors across most of the rear elevation
- Rooflights or a roof lantern positioned to light the centre of the room, away from the shadow line of the main house
- Open-plan layout tested against the 45-degree rule, which protects daylight to your neighbours' windows and can limit how close a flank wall or roof comes to the boundary
- Floor build-up and threshold detail coordinated so the new floor meets the existing one without a step
| Route | When it applies | Typical fee |
|---|---|---|
| Permitted development (Lawful Development Certificate) | Depth within 3m (terraced/semi) or 4m (detached), height and materials within PD limits | PD/LDC pack ~£950–£1,450 |
| Larger home extension (prior approval) | Depth up to 6m (terraced/semi) or 8m (detached), with neighbour notification | from £1,100 |
| Full householder planning permission | Extension exceeds PD/larger-home limits, or the property is in a conservation area with an Article 4 direction | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined planning and construction-ready pack with structural calculations for the opening and roof | Planning + Building Regs pack ~£2,200–£3,850 |
Rear Extension Drawings in Hillingdon — FAQs
How much does a rear extension cost to design in London?+
Do I need an architect for a rear extension?+
How long does it take to get rear extension drawings?+
What is the 45-degree rule?+
Will I need a Party Wall Agreement for a rear extension?+
Do I need planning permission for a loft conversion in Hillingdon?+
How does the Colne Valley green belt affect my Hillingdon project?+
Does proximity to Heathrow affect my plans?+
How long does Hillingdon Council take to decide?+
How much do planning drawings cost in Hillingdon?+
Get your free Hillingdon planning assessment
Tell us your Hillingdon address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.