Bickley · BR2 · Bromley

Rear Extension Drawings in Bickley BR2

Fixed-fee, MCIAT-chartered rear extension drawings for Bickley (BR2) homeowners — London Borough of Bromley validation and local constraints handled from the start.

Bickley BR2 is one of Bromley's most spacious suburbs, a landscape of detached Victorian and Edwardian villas around Bickley Park Road where deep plots make rear extensions, side infills and garden rooms the natural way to add space.

Much of the area lies within the Bickley Conservation Area, which removes several permitted development rights, so we confirm whether a property sits inside that boundary before recommending permitted development over a full householder application to Bromley.

Proposed floor plan

Bickley BR2

Bickley (BR2) — planning at a glance

Council: London Borough of Bromley
Postcode district: BR2
Planning portal: View the Bromley planning portal
Housing stock: Spacious detached late-Victorian and Edwardian villas set on generous plots around Bickley Park Road and Page Heath Lane, many with deep gardens that suit substantial rear and side extensions and garden rooms.
Article 4: No household Article 4 direction applies to Bickley BR2; permitted development rights remain for single dwellings outside the conservation area, while properties inside it lose several rights automatically through conservation-area status.
Conservation: Bickley Conservation Area
Sample streets: Bickley Park Road · Page Heath Lane · Southborough Road · Pines Road
Local constraints: Bickley Conservation Area subjects front-facing changes such as window replacement, render colour and roof material to conservation reviewBromley can refuse retrospective consent for inappropriate work inside the conservation area, so pre-application design mattersThe large detached villas mean side additions and boundary treatments are read against a spacious, low-density character that resists over-development

Planning in Bickley (BR2): what to know before you apply

Bickley properties inside the conservation area typically need full householder applications to Bromley, with generous plots supporting well-set-back rear and side extensions. Homes outside the boundary may retain permitted development for some works. We check the exact designation and plot before advising.

Typical Bickley housing stock

Spacious detached late-Victorian and Edwardian villas set on generous plots around Bickley Park Road and Page Heath Lane, many with deep gardens that suit substantial rear and side extensions and garden rooms.

Streets we regularly draw for in Bickley

Bickley Park Road · Page Heath Lane · Southborough Road · Pines Road

What BR2 is actually built of

Measured from 264 classified residential buildings in BR2, not from a description of the area.

Bickley BR2 housing mix

Residential building form across the BR2 postcode district, from 264 classified buildings.

Attached on more than one side	27%
Attached on one side	48%
Detached	25%
Median building footprint	76 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	1.37
Buildings classified	264

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Rear Extension Drawings for Bickley (BR2) homes: the package and the process

Depth is the number the application turns on, and it has to be measured from the original rear wall of the house rather than from whatever is there now. The drawings carry that dimension, the eaves and ridge heights, the position of any rooflight, and the boundary distances on both sides.

Where the scheme goes beyond the standard allowance and relies on the larger home extension route, the drawings serve a second purpose: they are what the council sends to the neighbours during the consultation. A clear, dimensioned proposed elevation answers the objection about overshadowing before it is made.

Depth is limited by the plot as much as by the rules. A long garden behind a terrace can take the full allowance, while a short one runs out before the rules do — and on a semi or detached house the same depth reads very differently from the boundary.

Do I need planning permission for a rear extension in London?

Many single-storey rear extensions qualify as permitted development, meaning no planning application is needed, provided depth, height and materials stay within set limits. That changes if your property sits in a conservation area or is subject to an Article 4 direction, both of which can remove permitted development rights across a street or borough — in that case a full householder planning application is required regardless of size.

Even where an extension qualifies, most homeowners obtain a Lawful Development Certificate to confirm that status in writing before building — useful for mortgage lenders, buyers and Building Control. We check your property against your borough's constraints before recommending a route.

How deep can a single-storey rear extension go?

Depth is the main constraint on a rear extension, and it depends on your house type and whether you use standard permitted development or the larger home extension scheme.

Permitted development

Standard permitted development allows a single-storey rear extension up to 3 metres deep for terraced and semi-detached houses, or 4 metres for detached houses, generally with eaves height limited to match or stay close to the existing house.

Larger home extension scheme

The prior-approval scheme extends this to 6 metres for terraced and semi-detached houses and 8 metres for detached houses. Your council writes to affected neighbours; if none object within the notification period, approval follows without a full planning application. If an objection is raised, the council assesses the impact on neighbouring light and outlook itself, rather than automatically refusing, so a well-considered design still has a good chance of approval.

Designing the kitchen-diner: rooflights, bi-folds and daylight

Most rear extensions exist to create one open-plan kitchen, dining and living space, so the drawing work focuses on getting light and flow right within the depth you are allowed.

Structural opening sized for bi-fold or sliding doors across most of the rear elevation
Rooflights or a roof lantern positioned to light the centre of the room, away from the shadow line of the main house
Open-plan layout tested against the 45-degree rule, which protects daylight to your neighbours' windows and can limit how close a flank wall or roof comes to the boundary
Floor build-up and threshold detail coordinated so the new floor meets the existing one without a step

Rear extension routes at a glance
Route	When it applies	Typical fee
Permitted development (Lawful Development Certificate)	Depth within 3m (terraced/semi) or 4m (detached), height and materials within PD limits	PD/LDC pack ~£950–£1,450
Larger home extension (prior approval)	Depth up to 6m (terraced/semi) or 8m (detached), with neighbour notification	from £1,100
Full householder planning permission	Extension exceeds PD/larger-home limits, or the property is in a conservation area with an Article 4 direction	Full Planning pack ~£1,600–£2,400
Planning + Building Regulations (structural)	Combined planning and construction-ready pack with structural calculations for the opening and roof	Planning + Building Regs pack ~£2,200–£3,850

Sheet from a rear extension drawings package drawn for a Bickley property in BR2, showing the existing and proposed arrangement at scale — A sheet from the rear extension drawings package we submit to London Borough of Bromley for Bickley (BR2) properties.

Also in Bickley BR2

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings Rear Extension Drawings across Bromley Rear Extension Drawings across London

FAQ

Rear Extension Drawings in Bickley BR2 — FAQs

How much does a rear extension cost to design in London?+

Rear extension drawings start from £1,100, with the final fee set by the route your extension takes — permitted development, prior approval or full planning — and whether you need building regulations and structural calculations bundled in. The fee is fixed and agreed upfront.

Do I need an architect for a rear extension?+

No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, producing the same council-accepted drawings as an architect for a fixed fee typically around 30% lower.

How long does it take to get rear extension drawings?+

Drawings are typically ready around 7 days from survey. Once submitted, councils have a statutory 8-week period to determine a standard householder planning application.

What is the 45-degree rule?+

It is a daylight test many London councils apply to check that a rear extension does not block too much light to a neighbour's nearest window, measured as a line drawn at 45 degrees from that window. We check it before submission, not after a refusal.

Will I need a Party Wall Agreement for a rear extension?+

Only if your foundations or new walls sit on or near the boundary with a neighbouring property. A straightforward rear extension set within your own plot often does not trigger the Party Wall etc. Act 1996, unlike a Side Return or Wraparound extension, which usually does.

Do I need planning permission for an extension in Bromley?+

Bromley has no borough-wide Article 4 direction affecting typical householder permitted development, so its detached and semi-detached homes often keep fuller rights than inner-London terraces — larger rear and single-storey extensions can qualify. The binding constraints are green-belt policy on outer properties and conservation control in Chislehurst, Keston and Bromley Town. We check both and can confirm permitted development with a Lawful Development Certificate.

Can I build a bigger extension because Bromley plots are larger?+

Often, yes. Bromley's generous interwar plots make substantial rear and double-storey extensions viable where an inner-London terrace could not accommodate them. The limit is usually policy rather than space — green belt restricts scale on outer properties, and conservation areas control design. We design to use the plot fully within those limits, checking permitted-development allowances for detached homes first.

How does green-belt designation affect my Bromley project?+

On green-belt properties toward Orpington, Chislehurst and the borough's edges, extensions are assessed against strict limits on disproportionate additions to the original dwelling. It does not rule out an extension, but scale and siting matter and the case must be evidenced carefully. We confirm whether your property is green belt and design a scheme that stays within policy.

How long does Bromley Council take to decide?+

Bromley determines most householder applications within the statutory eight-week period once validated. As London's largest borough by area, its casework spans suburban semis to green-belt properties, so a complete, correctly scaled submission is the best way to avoid a validation query and keep to that timescale.

How much do planning drawings cost in Bromley?+

We quote a fixed fee upfront, typically around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Bromley approves. Because plots here allow larger schemes, the fee tracks the project's complexity — a single-storey rear differs from a double-storey or a green-belt case — and we confirm it once we understand your plans.

Free Fixed Quote

Get your free Bickley planning assessment

Tell us your Bickley (BR2) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.