MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportNew Build Drawings in Ilford IG1

Single-storey rear extension onto a garden behind an Ilford IG1 Victorian terrace in the London Borough of Redbridge
Ilford · IG1 · Redbridge

New Build Drawings in Ilford IG1

Fixed-fee, MCIAT-chartered new build drawings for Ilford (IG1) homeowners — London Borough of Redbridge validation and local constraints handled from the start.

Free Ilford planning assessment

Tell us your Ilford (IG1) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Ilford (IG1) is the commercial heart of Redbridge, and its housing is dominated by the Victorian and Edwardian terraces that contractor A. Cameron Corbett laid out from the 1890s on the Cranbrook and Grange estates around Cranbrook Road. Rear and side-return extensions and loft conversions on these repeating terrace footprints are the most requested projects here.

The listed Valentines Mansion, a Grade II* house of over 320 years standing set in Valentines Park off Emerson Road, anchors the local conservation area, so work near the park and mansion faces tighter control over materials, rooflines and setting than the surrounding Corbett streets. We check where an IG1 property sits relative to that boundary before recommending a route.

Single-storey rear extension onto a garden behind an Ilford IG1 Victorian terrace in the London Borough of Redbridge
Isometric illustration of a Ilford IG1 home new build drawings design
Proposed floor plan
Ilford IG1

Planning in Ilford (IG1): what to know before you apply

Redbridge does not publish its Article 4 directions to the national dataset, so we verify permitted-development status for each IG1 address directly against the council's own conservation-area and Article 4 mapping. The Valentines Mansion conservation area is the main heritage constraint; away from it, the uniformity of the Corbett terraces means the borough's expectations for rear and roof work are well documented.

Typical Ilford housing stock

Long, consistent rows of Victorian and Edwardian terraces built from the 1890s by the contractor A. Cameron Corbett on the Cranbrook and Grange estates, together with larger bay-fronted period houses on the tree-lined roads bordering Valentines Park.

Streets we regularly draw for in Ilford

Cranbrook Road · Emerson Road · The Drive · Perth Road · Melbourne Road

What IG1 is actually built of

Measured from 292 classified residential buildings in IG1, not from a description of the area.

Ilford IG1 housing mix

Residential building form across the IG1 postcode district, from 292 classified buildings.

Attached on more than one side66%
Attached on one side32%
Detached2%
Median building footprint71 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate1.3
Buildings classified292

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

New Build Drawings for Ilford (IG1) homes: the package and the process

A new dwelling is a full application rather than a householder one, and the drawing set reflects that: site layout with levels and boundaries, floor plans and elevations for the new building, sections showing how it sits in the ground, and street-scene elevations placing it against what is already there.

Two packages follow the approval — the planning set and the construction set — and they have to stay in step. Foundation design, drainage strategy, thermal performance and fire strategy are drawn for Building Control against the same geometry that was granted permission, so the built house matches the approved one.

An infill plot is designed against its neighbours. Plot width, the building line either side, and the ridge heights next door set what the new house can be — and on a tight urban site those constraints usually shape the design more than the brief does.

Is my plot suitable for a new build in London?

A feasibility assessment looks at plot size and shape, access, existing boundary conditions, relevant planning policy for the borough, and the likely impact of a new dwelling on neighbouring properties before any design work begins. Infill plots — a gap between existing buildings on a street — and backland plots — a garden or yard site behind existing houses, reached by a shared access — each raise different issues: infill schemes are usually judged on how well they match the scale, spacing and character of the street, while backland schemes are judged heavily on overlooking, garden loss for neighbours, and whether the access arrangement is acceptable. A feasibility study gives an honest view of whether a scheme is likely to succeed before you commit to full drawings.

What does pre-application advice add to a new build project?

Pre-application advice is a formal, paid process most London boroughs offer, where planning officers give written feedback on a proposed scheme before a full application is submitted. For a new build — where the principle of development itself is often the main issue, not just the design details — this feedback can be invaluable: it surfaces concerns around density, massing, daylight and sunlight or heritage context early enough to be addressed in the drawings, rather than discovered for the first time as a refusal reason months into a full application. We prepare and submit pre-application enquiries as part of the new build service where it is likely to strengthen the eventual planning application.

How do daylight, sunlight and overlooking affect a new build design?

London boroughs assess new dwellings against their effect on the daylight and sunlight reaching neighbouring homes and gardens, commonly using the 45-degree rule as an initial check on a proposal's massing and position relative to neighbouring windows, alongside more detailed daylight and sunlight assessment on sensitive sites. Overlooking and loss of privacy from new windows, upper floors or roof terraces are assessed similarly, and often shape decisions on window placement, floor-to-floor heights and the overall footprint and massing of the new building. Designing with these constraints from the earliest sketch stage, rather than adjusting for them after a refusal, is one of the main advantages of instructing feasibility and pre-application work before a full planning set.

New build project stages
StageWhat it establishesTypical fee guide
FeasibilityWhether the plot can support a new dwelling and the likely constraintsQuoted individually, from within the £2,500 new build fee
Pre-application adviceWritten borough feedback on the scheme before a full applicationQuoted individually alongside the planning fee
Full planning drawingsThe complete drawing set submitted for planning permissionFrom £2,500
Building regs and structuralConstruction-ready drawings and calculations for buildingFrom £2,200–£3,850, quoted once planning is settled
Sheet from a new build drawings package drawn for a Ilford property in IG1, showing the existing and proposed arrangement at scale
A sheet from the new build drawings package we submit to London Borough of Redbridge for Ilford (IG1) properties.
FAQ

New Build Drawings in Ilford IG1 — FAQs

How much do new build drawings cost in London?+
New build drawings start from £2,500 for feasibility and a full planning drawing set on a straightforward infill or backland plot, with building regulations and structural drawings quoted separately once the planning design is agreed.
Can any garden or backland plot be built on in London?+
Not necessarily — backland and garden plots are assessed on access, overlooking, loss of garden amenity for neighbours and borough policy, and a feasibility assessment gives an honest early view of whether a scheme is likely to be supported.
Do I need pre-application advice before a full new build application?+
It is not mandatory, but for a new dwelling — where the principle of development is often the main issue — pre-application advice can surface concerns early enough to address them in the design, reducing the risk of refusal.
Do you handle building regulations and structural drawings for a new build, or only planning?+
Both — the full new build service covers planning, building regulations and structural drawings from one in-house team, so the design stays consistent from feasibility through to construction-ready drawings.
How long does a new build project take from feasibility to planning permission?+
This varies with site complexity and whether pre-application advice is sought, but a full planning application is determined within the statutory period the borough applies to the application type, once submitted via the Planning Portal.
Do I need planning permission for a loft conversion in Redbridge?+
On the Edwardian and interwar semis of Wanstead, Woodford and Barkingside, hip-to-gable and dormer lofts frequently qualify as permitted development within the volume limits, so a full application isn't always needed. Conservation areas such as Wanstead, Snaresbrook and the Ilford Garden Suburb restrict this. We check your street first and can confirm permitted development with a Lawful Development Certificate.
What does Redbridge's borough-wide HMO Article 4 direction affect?+
Redbridge applies a borough-wide Article 4 direction removing permitted development rights for change of use to an HMO (C3 to C4), so a conversion to a house in multiple occupation needs a full application anywhere in the borough. It doesn't affect a standard family extension or loft, but we confirm whether it applies to your intended use before advising.
What does the council expect for an extension in Wanstead or Woodford?+
The council pays close attention to preserving the rhythm and building line of its Edwardian and interwar suburban streets, so extensions are expected to respect the established line and roof form. Many single-storey rear extensions still fall within permitted development; where a full application is needed, we design to the borough's residential guidance so it validates and approves without repeated revisions.
How long does Redbridge Council take to decide?+
Redbridge determines most householder applications within the statutory eight-week period once validated; conservation cases can attract additional consultation. The commonest delay is a validation query, so we prepare Redbridge submissions to the council's checklist with correctly scaled existing and proposed drawings and a location plan.
How much do planning drawings cost in Redbridge?+
We work to a fixed fee agreed upfront, usually around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Redbridge approves. The figure depends on the scheme — a dormer loft differs from a double-storey extension — so we confirm it once we understand your project rather than billing by the hour.
Free Fixed Quote

Get your free Ilford planning assessment

Tell us your Ilford (IG1) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.