MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportNew Build Drawings in Chessington KT9

Single-storey rear extension onto a garden behind a 1930s semi-detached house in Chessington KT9 in the Royal Borough of Kingston
Chessington · KT9 · Kingston

New Build Drawings in Chessington KT9

Fixed-fee, MCIAT-chartered new build drawings for Chessington (KT9) homeowners — Royal Borough of Kingston upon Thames validation and local constraints handled from the start.

Free Chessington planning assessment

Tell us your Chessington (KT9) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Chessington (KT9) took its present shape in the 1930s, expanding as a planned suburb after the Southern Railway branch reached Chessington South in 1939 and Chessington Zoo opened in 1931. Its housing is predominantly interwar semi-detached, laid out on estate roads across former Surrey farmland, so almost every householder project here is an extension or loft on one of those consistent suburban pairs.

There is no conservation area covering Chessington — that is a genuine, verified fact, not an omission. Its planning character is instead shaped by the uniformity of its 1930s estate roads and by the Royal Borough of Kingston upon Thames's householder design expectations, which favour keeping the semi-detached rhythm, the gaps between pairs and the original materials intact. We treat that suburban cohesion, rather than a conservation designation, as the reference point when we design an extension.

Demand for rear extensions, two-storey side extensions and hip-to-gable lofts is steady across roads like Mansfield Road, Coutts Avenue and Roebuck Road, where regular plots and gardens are typical. We check each property's permitted-development position against Kingston's borough-wide controls first, then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.

Single-storey rear extension onto a garden behind a 1930s semi-detached house in Chessington KT9 in the Royal Borough of Kingston
Isometric illustration of a Chessington KT9 home new build drawings design
Proposed floor plan
Chessington KT9

Planning in Chessington (KT9): what to know before you apply

Because Chessington's estate roads repeat so consistently, Kingston assess extensions against the established semi-detached pattern, so matching original brick, render and roof form and preserving the gap between pairs matters more than on a mixed-typology road. There is no conservation area and no local Article 4 direction, so many houses retain permitted development rights for rear and loft work — but the finite gardens and shared building lines mean depth, height and neighbour impact are the points a householder application is judged on.

Typical Chessington housing stock

Predominantly 1930s semi-detached houses on planned suburban roads, generally set on regular plots with gardens front and rear, alongside postwar and modern infill. The consistent pairs and generous gardens are what makes rear extensions, side extensions and hip-to-gable loft conversions the common projects here.

Streets we regularly draw for in Chessington

Mansfield Road · Court Crescent · Hartfield Road · Cheshire Gardens · Moor Lane · Tudor Close · Coutts Avenue · Sanger Avenue · Mount Road · Roebuck Road · Ellingham Road · Green View

What KT9 is actually built of

Measured from 404 classified residential buildings in KT9, not from a description of the area.

Chessington KT9 housing mix

Residential building form across the KT9 postcode district, from 404 classified buildings.

Attached on more than one side37%
Attached on one side53%
Detached9%
Median building footprint58 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate1.16
Buildings classified404

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

New Build Drawings for Chessington (KT9) homes: the package and the process

A new dwelling is a full application rather than a householder one, and the drawing set reflects that: site layout with levels and boundaries, floor plans and elevations for the new building, sections showing how it sits in the ground, and street-scene elevations placing it against what is already there.

Two packages follow the approval — the planning set and the construction set — and they have to stay in step. Foundation design, drainage strategy, thermal performance and fire strategy are drawn for Building Control against the same geometry that was granted permission, so the built house matches the approved one.

An infill plot is designed against its neighbours. Plot width, the building line either side, and the ridge heights next door set what the new house can be — and on a tight urban site those constraints usually shape the design more than the brief does.

Is my plot suitable for a new build in London?

A feasibility assessment looks at plot size and shape, access, existing boundary conditions, relevant planning policy for the borough, and the likely impact of a new dwelling on neighbouring properties before any design work begins. Infill plots — a gap between existing buildings on a street — and backland plots — a garden or yard site behind existing houses, reached by a shared access — each raise different issues: infill schemes are usually judged on how well they match the scale, spacing and character of the street, while backland schemes are judged heavily on overlooking, garden loss for neighbours, and whether the access arrangement is acceptable. A feasibility study gives an honest view of whether a scheme is likely to succeed before you commit to full drawings.

What does pre-application advice add to a new build project?

Pre-application advice is a formal, paid process most London boroughs offer, where planning officers give written feedback on a proposed scheme before a full application is submitted. For a new build — where the principle of development itself is often the main issue, not just the design details — this feedback can be invaluable: it surfaces concerns around density, massing, daylight and sunlight or heritage context early enough to be addressed in the drawings, rather than discovered for the first time as a refusal reason months into a full application. We prepare and submit pre-application enquiries as part of the new build service where it is likely to strengthen the eventual planning application.

How do daylight, sunlight and overlooking affect a new build design?

London boroughs assess new dwellings against their effect on the daylight and sunlight reaching neighbouring homes and gardens, commonly using the 45-degree rule as an initial check on a proposal's massing and position relative to neighbouring windows, alongside more detailed daylight and sunlight assessment on sensitive sites. Overlooking and loss of privacy from new windows, upper floors or roof terraces are assessed similarly, and often shape decisions on window placement, floor-to-floor heights and the overall footprint and massing of the new building. Designing with these constraints from the earliest sketch stage, rather than adjusting for them after a refusal, is one of the main advantages of instructing feasibility and pre-application work before a full planning set.

New build project stages
StageWhat it establishesTypical fee guide
FeasibilityWhether the plot can support a new dwelling and the likely constraintsQuoted individually, from within the £2,500 new build fee
Pre-application adviceWritten borough feedback on the scheme before a full applicationQuoted individually alongside the planning fee
Full planning drawingsThe complete drawing set submitted for planning permissionFrom £2,500
Building regs and structuralConstruction-ready drawings and calculations for buildingFrom £2,200–£3,850, quoted once planning is settled
Sheet from a new build drawings package drawn for a Chessington property in KT9, showing the existing and proposed arrangement at scale
A sheet from the new build drawings package we submit to Royal Borough of Kingston upon Thames for Chessington (KT9) properties.
FAQ

New Build Drawings in Chessington KT9 — FAQs

How much do new build drawings cost in London?+
New build drawings start from £2,500 for feasibility and a full planning drawing set on a straightforward infill or backland plot, with building regulations and structural drawings quoted separately once the planning design is agreed.
Can any garden or backland plot be built on in London?+
Not necessarily — backland and garden plots are assessed on access, overlooking, loss of garden amenity for neighbours and borough policy, and a feasibility assessment gives an honest early view of whether a scheme is likely to be supported.
Do I need pre-application advice before a full new build application?+
It is not mandatory, but for a new dwelling — where the principle of development is often the main issue — pre-application advice can surface concerns early enough to address them in the design, reducing the risk of refusal.
Do you handle building regulations and structural drawings for a new build, or only planning?+
Both — the full new build service covers planning, building regulations and structural drawings from one in-house team, so the design stays consistent from feasibility through to construction-ready drawings.
How long does a new build project take from feasibility to planning permission?+
This varies with site complexity and whether pre-application advice is sought, but a full planning application is determined within the statutory period the borough applies to the application type, once submitted via the Planning Portal.
Do I need planning permission to extend a house in Chessington?+
Not always. Many Chessington semis retain permitted development rights, so a modest single-storey rear extension or a hip-to-gable loft conversion can often proceed without a full planning application. Because the plots are regular but finite and the gap between pairs is protected, we check your property's size limits and building lines against Kingston's controls first, and prepare a full householder application where the project goes beyond permitted development — as a two-storey side extension often will.
Is Chessington in a conservation area?+
No. There is no conservation area covering Chessington. Its planning character is shaped instead by its uniform 1930s semi-detached estate roads and Kingston's householder design expectations, which favour keeping the semi-detached rhythm, the gaps between pairs and the original materials intact when you extend.
How much do planning and building-regulation drawings cost for a Chessington extension?+
We work to fixed fees agreed before we start, with a typical turnaround of around seven days for a standard rear extension, side extension or loft on a Chessington semi. As a chartered architectural technologist practice we produce the same council-accepted planning and building-regulation drawings as an architect, usually for a lower fee, and include free redraws until your application is approved.
How long does the Royal Borough of Kingston take to decide?+
Kingston determines most householder applications within the statutory eight-week period once validated; conservation and riverside cases can involve additional consultation. We prepare submissions to the council's validation checklist to avoid the drawing queries that cause most delays.
Free Fixed Quote

Get your free Chessington planning assessment

Tell us your Chessington (KT9) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.