Measured Building Survey in Sidcup DA15
Fixed-fee, MCIAT-chartered measured building survey for Sidcup (DA15) homeowners — London Borough of Bexley validation and local constraints handled from the start.
Sidcup's DA15 stretches north and west from the town toward Blackfen, Lamorbey and Longlands, mixing broad inter-war suburban avenues with older hamlets along Halfway Street and Burnt Oak Lane. Side-return, rear and loft extensions on the 1930s semis are the everyday work, but two designated conservation areas change the rules on specific streets.
The Halfway Street Conservation Area, designated in 1985, protects some of the oldest cottages in the borough around Holy Trinity Church, while the Longlands Road Conservation Area of 1992 guards an almost unaltered inter-war estate. Both carry Article 4 Directions, so alterations that are automatic elsewhere in DA15 need a full application within their boundaries.
Planning in Sidcup (DA15): what to know before you apply
Within the Halfway Street and Longlands Road conservation areas the Article 4 Directions withdraw permitted development for elevation, roof, window and front-boundary changes, so alterations that are automatic on nearby 1930s streets need a householder application here. Elsewhere in DA15 — the wider Blackfen, Lamorbey and Longlands suburbs — rear and loft extensions on the inter-war semis commonly remain permitted development, subject to the usual size and height limits.
Typical Sidcup housing stock
Sidcup's DA15 stock runs from some of the oldest houses in the borough — the 17th- and 18th-century cottages lining Halfway Street and Burnt Oak Lane — to the almost unaltered inter-war semi-detached estate of Longlands Road, with broad Edwardian and 1930s suburban avenues around Blackfen and Lamorbey in between.
Streets we regularly draw for in Sidcup
Halfway Street · Burnt Oak Lane · Longlands Road · Blackfen Road
What DA15 is actually built of
Measured from 387 classified residential buildings in DA15, not from a description of the area.
Sidcup DA15 housing mix
Residential building form across the DA15 postcode district, from 387 classified buildings.
| Attached on more than one side | 42% |
|---|---|
| Attached on one side | 50% |
| Detached | 8% |
| Median building footprint | 67 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.04 |
| Buildings classified | 387 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Measured Building Survey for Sidcup (DA15) homes: the package and the process
A measured survey is the foundation every later drawing is checked against. We record the building as found — floor plans, elevations, sections, levels and, where needed, the position of structure and services — to a stated tolerance, so nothing downstream rests on an assumption about what is there.
The deliverable is chosen for what happens next. A conversion or extension design wants a layered CAD file that a designer can build on; a party wall or dilapidations matter wants dimensioned PDFs that stand on their own as a record. We agree that before the survey, because it changes what we capture.
Survey effort follows the building, not the floor area. A regular detached house measures quickly; a terrace with a rear outrigger, split levels, and a century of alterations takes longer because the survey has to record what was actually built rather than what the plan form implies.
Why does a planning or building regulations application need a measured survey?
A planning or building regulations application needs to show the existing building accurately alongside the proposed changes, so the council or Building Control can judge the impact of the work against what is actually there. Existing plans, elevations and sections drawn from an accurate measured survey give the borough confidence that the proposal has been designed against real dimensions, and give your builder a reliable set of drawings to price and build from — an application based on inaccurate or assumed dimensions risks queries, delays, or a design that does not translate cleanly on site.
What does a measured building survey capture?
The survey records everything needed to produce accurate existing drawings: internal room dimensions and floor-to-ceiling heights on every level, the position, width and height of every door and window, wall thicknesses, staircase dimensions and headroom, roof shape and pitch, chimney breasts and structural features, and the external footprint and boundary relationship of the property. Where relevant to the project, we also record ground levels, existing drainage runs and neighbouring boundary conditions.
This is captured with a laser distance meter rather than a tape measure, which keeps the survey accurate to within a few millimetres across a whole property and removes the cumulative measuring error that can creep into a hand-measured survey of a larger or more complex building.
Can I reuse an old survey or estate agent floor plan instead?
Generally, no — estate agent floor plans are produced for marketing purposes and are not dimensionally accurate enough to design an extension or loft conversion against, and a previous owner's drawings may not reflect alterations made since, or may simply be inaccurate to begin with. A fresh measured survey is a modest cost relative to the overall project and is the single best way to avoid a redesign once a builder is on site and finds the real dimensions differ from the drawings.
| Output drawing | Relies on the measured survey for |
|---|---|
| Floor plans | Accurate room dimensions and layout for sale, letting or lease use |
| Planning drawings | Existing plans, elevations and sections to compare against the proposal |
| Building regulations drawings | Accurate existing structure to design technical compliance against |
| Structural calculations | True spans, floor-to-ceiling heights and existing structural elements |
Measured Building Survey in Sidcup DA15 — FAQs
How much does a measured building survey cost?+
How long does a measured survey take?+
Is a measured survey the same as a floor plan?+
Do I need a measured survey if I am only doing internal work?+
Can the survey be used for more than one purpose?+
Do I need planning permission for an extension in Bexley?+
Can I build a bigger extension because Bexley plots are larger?+
What extra control applies in Old Bexley Village or around Danson Park?+
How long does Bexley Council take to decide?+
How much do planning drawings cost in Bexley?+
Get your free Sidcup planning assessment
Tell us your Sidcup (DA15) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.