Rear kitchen extension interior for a 1930s semi in Sidcup DA14, London Borough of Bexley

Sidcup · DA14 · Bexley

Measured Building Survey in Sidcup DA14

Fixed-fee, MCIAT-chartered measured building survey for Sidcup (DA14) homeowners — London Borough of Bexley validation and local constraints handled from the start.

Sidcup's DA14 streets run from the 1930s semis of the Cray valley to the historic core of Foots Cray village, and most of our work here is rear kitchen extensions and loft conversions that add space to those bay-fronted family homes without losing garden depth.

If your home sits inside the Foots Cray Conservation Area the permitted-development shortcuts narrow, so we always confirm the boundary line first and then advise whether a project runs under permitted development or needs a full householder planning application to Bexley.

Proposed floor plan

Sidcup DA14

Sidcup (DA14) — planning at a glance

Council: London Borough of Bexley
Postcode district: DA14
Planning portal: View the Bexley planning portal
Housing stock: DA14 is dominated by 1930s bay-fronted semis and terraces along the Cray valley, wrapped around the older historic core of Foots Cray village where Victorian and Georgian buildings survive on the High Street. Larger detached and inter-war housing sits on the roads backing onto Foots Cray Meadows.
Article 4: No Article 4 direction is published for the DA14 part of Sidcup, so permitted-development rights apply outside the Foots Cray Conservation Area boundary.
Conservation: Foots Cray Conservation Area
Sample streets: High Street · Rectory Lane · Maidstone Road · Church Road
Local constraints: Foots Cray Conservation Area — rear and side extensions inside the boundary face tighter design scrutiny and lose some permitted-development flexibilityProperties backing onto the Grade II registered Foots Cray Meadows and the River Cray face setting and flood-risk checks on deeper rear extensionsMature TPO tree cover across the Cray valley means many DA14 gardens carry protected trees that constrain extension footprints and foundations

Planning in Sidcup (DA14): what to know before you apply

Most DA14 extensions and lofts outside the conservation area proceed under permitted development or a lawful development certificate. Inside the Foots Cray Conservation Area, or where a home backs onto Foots Cray Meadows or carries protected trees, a full householder planning application to Bexley is the safer route. We check the boundary and tree constraints before recommending either path.

Typical Sidcup housing stock

DA14 is dominated by 1930s bay-fronted semis and terraces along the Cray valley, wrapped around the older historic core of Foots Cray village where Victorian and Georgian buildings survive on the High Street. Larger detached and inter-war housing sits on the roads backing onto Foots Cray Meadows.

Streets we regularly draw for in Sidcup

High Street · Rectory Lane · Maidstone Road · Church Road

What DA14 is actually built of

Measured from 299 classified residential buildings in DA14, not from a description of the area.

Sidcup DA14 housing mix

Residential building form across the DA14 postcode district, from 299 classified buildings.

Attached on more than one side	34%
Attached on one side	53%
Detached	13%
Median building footprint	71 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	1.25
Buildings classified	299

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Measured Building Survey for Sidcup (DA14) homes: the package and the process

A measured survey is the foundation every later drawing is checked against. We record the building as found — floor plans, elevations, sections, levels and, where needed, the position of structure and services — to a stated tolerance, so nothing downstream rests on an assumption about what is there.

The deliverable is chosen for what happens next. A conversion or extension design wants a layered CAD file that a designer can build on; a party wall or dilapidations matter wants dimensioned PDFs that stand on their own as a record. We agree that before the survey, because it changes what we capture.

Survey effort follows the building, not the floor area. A regular detached house measures quickly; a terrace with a rear outrigger, split levels, and a century of alterations takes longer because the survey has to record what was actually built rather than what the plan form implies.

Why does a planning or building regulations application need a measured survey?

A planning or building regulations application needs to show the existing building accurately alongside the proposed changes, so the council or Building Control can judge the impact of the work against what is actually there. Existing plans, elevations and sections drawn from an accurate measured survey give the borough confidence that the proposal has been designed against real dimensions, and give your builder a reliable set of drawings to price and build from — an application based on inaccurate or assumed dimensions risks queries, delays, or a design that does not translate cleanly on site.

What does a measured building survey capture?

The survey records everything needed to produce accurate existing drawings: internal room dimensions and floor-to-ceiling heights on every level, the position, width and height of every door and window, wall thicknesses, staircase dimensions and headroom, roof shape and pitch, chimney breasts and structural features, and the external footprint and boundary relationship of the property. Where relevant to the project, we also record ground levels, existing drainage runs and neighbouring boundary conditions.

This is captured with a laser distance meter rather than a tape measure, which keeps the survey accurate to within a few millimetres across a whole property and removes the cumulative measuring error that can creep into a hand-measured survey of a larger or more complex building.

Can I reuse an old survey or estate agent floor plan instead?

Generally, no — estate agent floor plans are produced for marketing purposes and are not dimensionally accurate enough to design an extension or loft conversion against, and a previous owner's drawings may not reflect alterations made since, or may simply be inaccurate to begin with. A fresh measured survey is a modest cost relative to the overall project and is the single best way to avoid a redesign once a builder is on site and finds the real dimensions differ from the drawings.

What a measured survey feeds into
Output drawing	Relies on the measured survey for
Floor plans	Accurate room dimensions and layout for sale, letting or lease use
Planning drawings	Existing plans, elevations and sections to compare against the proposal
Building regulations drawings	Accurate existing structure to design technical compliance against
Structural calculations	True spans, floor-to-ceiling heights and existing structural elements

Sheet from a measured building survey package drawn for a Sidcup property in DA14, showing the existing and proposed arrangement at scale — A sheet from the measured building survey package we submit to London Borough of Bexley for Sidcup (DA14) properties.

Also in Sidcup DA14

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings Measured Building Survey across Bexley Measured Building Survey across London

FAQ

Measured Building Survey in Sidcup DA14 — FAQs

How much does a measured building survey cost?+

A measured building survey starts from £450, or is included as the first stage of a planning, building regulations or architectural drawing package, depending on the size and complexity of the property.

How long does a measured survey take?+

The site visit itself typically takes a few hours depending on the size of the property, with existing drawings produced from the survey data shortly afterwards as the basis for the next stage of your project.

Is a measured survey the same as a floor plan?+

A measured survey is the site data-capture process; floor plans are one of the outputs drawn from it. The same survey can also produce elevations, sections and the existing-layout base drawing for a planning application.

Do I need a measured survey if I am only doing internal work?+

Usually yes if you are removing or altering walls, since accurate existing dimensions and structural features are needed to design and calculate the changes safely, even where no planning application is required.

Can the survey be used for more than one purpose?+

Yes — a single measured survey typically underpins floor plans, planning drawings, building regulations drawings and structural calculations for the same project, so it only needs to be carried out once.

Do I need planning permission for an extension in Bexley?+

Bexley has no borough-wide Article 4 direction affecting typical householder permitted development, so its semi-detached homes often keep fuller rights than inner-London terraces — larger rear and single-storey extensions can qualify. Conservation areas such as Old Bexley Village and Danson Park, and riverside flood-zone constraints toward Erith, restrict this. We check your address first and can confirm permitted development with a Lawful Development Certificate.

Can I build a bigger extension because Bexley plots are larger?+

Often, yes. The generous interwar plots across Bexleyheath, Sidcup and Welling make substantial rear and double-storey extensions viable where a tight terrace could not. The limit is usually design and amenity policy rather than space. We design to use the plot fully within permitted-development allowances or a well-evidenced full application.

What extra control applies in Old Bexley Village or around Danson Park?+

These conservation areas carry design control over materials, rooflines and front elevations, and the Upton area of Bexleyheath includes the setting of William Morris's Red House. Permitted development is often restricted there, so we design to the area's character and prepare a full, context-led application where a standard permitted-development route doesn't apply.

How long does Bexley Council take to decide?+

Bexley determines most householder applications within the statutory eight-week period once validated; conservation cases can involve additional consultation. A complete, correctly scaled submission is the best way to avoid a validation query — we prepare Bexley drawings to the council's checklist to keep the application on track.

How much do planning drawings cost in Bexley?+

We quote a fixed fee upfront, typically around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Bexley approves. Because plots here allow larger schemes, the fee tracks complexity — a single-storey rear differs from a double-storey — and we confirm it once we understand your plans.

Free Fixed Quote

Get your free Sidcup planning assessment

Tell us your Sidcup (DA14) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.