Measured Building Survey in Putney SW15
Fixed-fee, MCIAT-chartered measured building survey for Putney (SW15) homeowners — London Borough of Wandsworth validation and local constraints handled from the start.
Putney (SW15) is unusually heavily conservation-controlled for an outer-inner London neighbourhood: five separate conservation areas — Putney Embankment, West Putney, East Putney, Charlwood Road & Lifford Street, and Oxford Road — cover a large share of the housing. Whether a property sits inside one of those boundaries is the single biggest factor in how an extension or loft is designed and assessed.
Add the Thames on the northern edge, and riverside and Embankment properties also carry flood-zone considerations that have to be addressed in the application. We map a Putney property against the conservation and flood-zone boundaries first, then design the drawings to Wandsworth's residential guidance so the application is validated without a query.
Planning in Putney (SW15): what to know before you apply
SW15 has no householder Article 4 direction, but its five conservation areas mean permitted development cannot be assumed across much of Putney, and riverside properties near the Embankment sit within the Thames flood zone — both are checked before we recommend a route.
Typical Putney housing stock
Victorian and Edwardian terraces on the streets climbing from the river, riverside mansion blocks along the Embankment, and interwar semi-detached houses toward Putney Heath and Roehampton.
Streets we regularly draw for in Putney
Putney High Street · Upper Richmond Road · Lower Richmond Road · Disraeli Road
What SW15 is actually built of
Measured from 341 classified residential buildings in SW15, not from a description of the area.
Putney SW15 housing mix
Residential building form across the SW15 postcode district, from 341 classified buildings.
| Attached on more than one side | 55% |
|---|---|
| Attached on one side | 34% |
| Detached | 10% |
| Median building footprint | 71 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 2.14 |
| Buildings classified | 341 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Measured Building Survey for Putney (SW15) homes: the package and the process
A measured survey is the foundation every later drawing is checked against. We record the building as found — floor plans, elevations, sections, levels and, where needed, the position of structure and services — to a stated tolerance, so nothing downstream rests on an assumption about what is there.
The deliverable is chosen for what happens next. A conversion or extension design wants a layered CAD file that a designer can build on; a party wall or dilapidations matter wants dimensioned PDFs that stand on their own as a record. We agree that before the survey, because it changes what we capture.
Survey effort follows the building, not the floor area. A regular detached house measures quickly; a terrace with a rear outrigger, split levels, and a century of alterations takes longer because the survey has to record what was actually built rather than what the plan form implies.
Why does a planning or building regulations application need a measured survey?
A planning or building regulations application needs to show the existing building accurately alongside the proposed changes, so the council or Building Control can judge the impact of the work against what is actually there. Existing plans, elevations and sections drawn from an accurate measured survey give the borough confidence that the proposal has been designed against real dimensions, and give your builder a reliable set of drawings to price and build from — an application based on inaccurate or assumed dimensions risks queries, delays, or a design that does not translate cleanly on site.
What does a measured building survey capture?
The survey records everything needed to produce accurate existing drawings: internal room dimensions and floor-to-ceiling heights on every level, the position, width and height of every door and window, wall thicknesses, staircase dimensions and headroom, roof shape and pitch, chimney breasts and structural features, and the external footprint and boundary relationship of the property. Where relevant to the project, we also record ground levels, existing drainage runs and neighbouring boundary conditions.
This is captured with a laser distance meter rather than a tape measure, which keeps the survey accurate to within a few millimetres across a whole property and removes the cumulative measuring error that can creep into a hand-measured survey of a larger or more complex building.
Can I reuse an old survey or estate agent floor plan instead?
Generally, no — estate agent floor plans are produced for marketing purposes and are not dimensionally accurate enough to design an extension or loft conversion against, and a previous owner's drawings may not reflect alterations made since, or may simply be inaccurate to begin with. A fresh measured survey is a modest cost relative to the overall project and is the single best way to avoid a redesign once a builder is on site and finds the real dimensions differ from the drawings.
| Output drawing | Relies on the measured survey for |
|---|---|
| Floor plans | Accurate room dimensions and layout for sale, letting or lease use |
| Planning drawings | Existing plans, elevations and sections to compare against the proposal |
| Building regulations drawings | Accurate existing structure to design technical compliance against |
| Structural calculations | True spans, floor-to-ceiling heights and existing structural elements |
Measured Building Survey in Putney SW15 — FAQs
How much does a measured building survey cost?+
How long does a measured survey take?+
Is a measured survey the same as a floor plan?+
Do I need a measured survey if I am only doing internal work?+
Can the survey be used for more than one purpose?+
Do I need planning permission for a side-return extension in Wandsworth?+
What does Wandsworth's basement Article 4 direction mean for me?+
How long will Wandsworth take to decide my application?+
Can you design an extension for a converted flat near the commons?+
How much do Wandsworth planning drawings cost?+
Get your free Putney planning assessment
Tell us your Putney (SW15) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.