Measured Building Survey in Paddington W2
Fixed-fee, MCIAT-chartered measured building survey for Paddington (W2) homeowners — Westminster City Council validation and local constraints handled from the start.
Paddington (W2) in Westminster is dominated by wide stucco-fronted terraces that were built as single family houses and subdivided into flats generations ago. The Bayswater and Queensway conservation areas protect those uniform painted frontages, while the Hallfield Estate conservation area protects something quite different — a post-war modernist estate whose original design is the reason for the designation.
Two Article 4 directions shape most W2 projects. Westminster has removed permitted development rights for basement development, so the lower-ground excavations that are common under these tall terraces need a full planning application from the outset. The Class E to C3 direction in the Central Activities Zone does the same for commercial-to-residential conversion. Because so much of W2 is flats within those subdivided terraces, tenure usually matters as much as designation: flats carry no permitted development rights at all, so freeholder consent runs alongside the application. We confirm the tenure, the Article 4 position and which conservation area an address sits in before drawing to Westminster's guidance.
Planning in Paddington (W2): what to know before you apply
W2 is covered by Westminster's Article 4 direction removing permitted development rights for basement development, so lower-ground excavation needs a full planning application. The Class E to C3 direction applies in the Central Activities Zone, removing the right to convert commercial floorspace to residential without permission. Three conservation areas apply — Bayswater, Queensway and the Hallfield Estate — the first two protecting stucco frontages and the third a post-war modernist scheme. Much of the district's stock is flats within subdivided terraces, which have no permitted development rights regardless of designation.
Typical Paddington housing stock
Wide stucco-fronted terraces built as single houses around Bayswater and Queensway and long since subdivided into flats, alongside the Hallfield Estate — a listed post-war modernist scheme that is protected as a conservation area in its own right.
Streets we regularly draw for in Paddington
Praed Street · Sussex Gardens · Westbourne Terrace · Craven Road
What W2 is actually built of
Measured from 131 classified residential buildings in W2, not from a description of the area.
Paddington W2 housing mix
Residential building form across the W2 postcode district, from 131 classified buildings.
| Attached on more than one side | 77% |
|---|---|
| Attached on one side | 14% |
| Detached | 9% |
| Median building footprint | 91 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 6.86 |
| Buildings classified | 131 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Measured Building Survey for Paddington (W2) homes: the package and the process
A measured survey is the foundation every later drawing is checked against. We record the building as found — floor plans, elevations, sections, levels and, where needed, the position of structure and services — to a stated tolerance, so nothing downstream rests on an assumption about what is there.
The deliverable is chosen for what happens next. A conversion or extension design wants a layered CAD file that a designer can build on; a party wall or dilapidations matter wants dimensioned PDFs that stand on their own as a record. We agree that before the survey, because it changes what we capture.
Survey effort follows the building, not the floor area. A regular detached house measures quickly; a terrace with a rear outrigger, split levels, and a century of alterations takes longer because the survey has to record what was actually built rather than what the plan form implies.
Why does a planning or building regulations application need a measured survey?
A planning or building regulations application needs to show the existing building accurately alongside the proposed changes, so the council or Building Control can judge the impact of the work against what is actually there. Existing plans, elevations and sections drawn from an accurate measured survey give the borough confidence that the proposal has been designed against real dimensions, and give your builder a reliable set of drawings to price and build from — an application based on inaccurate or assumed dimensions risks queries, delays, or a design that does not translate cleanly on site.
What does a measured building survey capture?
The survey records everything needed to produce accurate existing drawings: internal room dimensions and floor-to-ceiling heights on every level, the position, width and height of every door and window, wall thicknesses, staircase dimensions and headroom, roof shape and pitch, chimney breasts and structural features, and the external footprint and boundary relationship of the property. Where relevant to the project, we also record ground levels, existing drainage runs and neighbouring boundary conditions.
This is captured with a laser distance meter rather than a tape measure, which keeps the survey accurate to within a few millimetres across a whole property and removes the cumulative measuring error that can creep into a hand-measured survey of a larger or more complex building.
Can I reuse an old survey or estate agent floor plan instead?
Generally, no — estate agent floor plans are produced for marketing purposes and are not dimensionally accurate enough to design an extension or loft conversion against, and a previous owner's drawings may not reflect alterations made since, or may simply be inaccurate to begin with. A fresh measured survey is a modest cost relative to the overall project and is the single best way to avoid a redesign once a builder is on site and finds the real dimensions differ from the drawings.
| Output drawing | Relies on the measured survey for |
|---|---|
| Floor plans | Accurate room dimensions and layout for sale, letting or lease use |
| Planning drawings | Existing plans, elevations and sections to compare against the proposal |
| Building regulations drawings | Accurate existing structure to design technical compliance against |
| Structural calculations | True spans, floor-to-ceiling heights and existing structural elements |
Measured Building Survey in Paddington W2 — FAQs
How much does a measured building survey cost?+
How long does a measured survey take?+
Is a measured survey the same as a floor plan?+
Do I need a measured survey if I am only doing internal work?+
Can the survey be used for more than one purpose?+
Do I need planning permission for works in Westminster?+
I live in a mansion block — what extra consent might I need?+
Will I need a Basement Impact Assessment in Westminster?+
How long does Westminster City Council take to decide?+
How much do planning drawings cost in Westminster?+
Get your free Paddington planning assessment
Tell us your Paddington (W2) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.