Measured Building Survey in Hampstead NW3
Fixed-fee, MCIAT-chartered measured building survey for Hampstead (NW3) homeowners — London Borough of Camden validation and local constraints handled from the start.
Hampstead (NW3) is, in permitted-development terms, close to a special case. Three conservation areas cover the district — Hampstead, Belsize and Fitzjohns/Netherhall — and Camden has attached a non-immediate Article 4 direction to each of them, on top of the borough-wide Basements direction. The practical effect is that very little in NW3 proceeds under permitted development.
That reshapes what a project looks like here. Basement works need a full application under the Basements direction; the non-immediate Article 4 directions across Hampstead (excluding Frognal Way), Belsize and Fitzjohns/Netherhall strip further rights inside those conservation areas; the village core carries a very high concentration of listed buildings needing listed building consent alongside planning; and because so many of the large Fitzjohns Avenue and Belsize Park villas were long ago converted into flats, a large share of NW3 work is flat alteration — where permitted development rights do not exist in the first place. We establish the designation, listing and tenure position for an NW3 address before drawing to Camden's guidance.
Planning in Hampstead (NW3): what to know before you apply
NW3 is one of the most heavily restricted districts in London for householder work. Camden's Basements Article 4 direction removes permitted development rights for basement schemes, and non-immediate Article 4 directions apply across all three conservation areas — Hampstead (excluding Frognal Way), Belsize and Fitzjohns/Netherhall — removing further rights inside them. The village core has a very high concentration of listed buildings requiring listed building consent, and the widespread conversion of the large villas into flats means many NW3 projects have no permitted development rights regardless of designation. Assume a full application in NW3.
Typical Hampstead housing stock
Georgian houses in the old village core, substantial Victorian red-brick villas along Fitzjohns Avenue and Netherhall Gardens, and large Victorian semi-detached and terraced houses through Belsize Park, much of it converted to flats.
Streets we regularly draw for in Hampstead
Hampstead High Street · Fitzjohns Avenue · Netherhall Gardens · Belsize Park Gardens
What NW3 is actually built of
Measured from 237 classified residential buildings in NW3, not from a description of the area.
Hampstead NW3 housing mix
Residential building form across the NW3 postcode district, from 237 classified buildings.
| Attached on more than one side | 43% |
|---|---|
| Attached on one side | 37% |
| Detached | 20% |
| Median building footprint | 92 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 2.82 |
| Buildings classified | 237 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Measured Building Survey for Hampstead (NW3) homes: the package and the process
A measured survey is the foundation every later drawing is checked against. We record the building as found — floor plans, elevations, sections, levels and, where needed, the position of structure and services — to a stated tolerance, so nothing downstream rests on an assumption about what is there.
The deliverable is chosen for what happens next. A conversion or extension design wants a layered CAD file that a designer can build on; a party wall or dilapidations matter wants dimensioned PDFs that stand on their own as a record. We agree that before the survey, because it changes what we capture.
Survey effort follows the building, not the floor area. A regular detached house measures quickly; a terrace with a rear outrigger, split levels, and a century of alterations takes longer because the survey has to record what was actually built rather than what the plan form implies.
Why does a planning or building regulations application need a measured survey?
A planning or building regulations application needs to show the existing building accurately alongside the proposed changes, so the council or Building Control can judge the impact of the work against what is actually there. Existing plans, elevations and sections drawn from an accurate measured survey give the borough confidence that the proposal has been designed against real dimensions, and give your builder a reliable set of drawings to price and build from — an application based on inaccurate or assumed dimensions risks queries, delays, or a design that does not translate cleanly on site.
What does a measured building survey capture?
The survey records everything needed to produce accurate existing drawings: internal room dimensions and floor-to-ceiling heights on every level, the position, width and height of every door and window, wall thicknesses, staircase dimensions and headroom, roof shape and pitch, chimney breasts and structural features, and the external footprint and boundary relationship of the property. Where relevant to the project, we also record ground levels, existing drainage runs and neighbouring boundary conditions.
This is captured with a laser distance meter rather than a tape measure, which keeps the survey accurate to within a few millimetres across a whole property and removes the cumulative measuring error that can creep into a hand-measured survey of a larger or more complex building.
Can I reuse an old survey or estate agent floor plan instead?
Generally, no — estate agent floor plans are produced for marketing purposes and are not dimensionally accurate enough to design an extension or loft conversion against, and a previous owner's drawings may not reflect alterations made since, or may simply be inaccurate to begin with. A fresh measured survey is a modest cost relative to the overall project and is the single best way to avoid a redesign once a builder is on site and finds the real dimensions differ from the drawings.
| Output drawing | Relies on the measured survey for |
|---|---|
| Floor plans | Accurate room dimensions and layout for sale, letting or lease use |
| Planning drawings | Existing plans, elevations and sections to compare against the proposal |
| Building regulations drawings | Accurate existing structure to design technical compliance against |
| Structural calculations | True spans, floor-to-ceiling heights and existing structural elements |
Measured Building Survey in Hampstead NW3 — FAQs
How much does a measured building survey cost?+
How long does a measured survey take?+
Is a measured survey the same as a floor plan?+
Do I need a measured survey if I am only doing internal work?+
Can the survey be used for more than one purpose?+
Do I need planning permission for a rear extension in Camden?+
What is a Basement Impact Assessment and will I need one in Camden?+
Can I make changes to a listed building in Camden?+
How long does Camden take to decide an application?+
How much do planning drawings cost in Camden?+
Get your free Hampstead planning assessment
Tell us your Hampstead (NW3) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.