Measured Building Survey in Golders Green NW11
Fixed-fee, MCIAT-chartered measured building survey for Golders Green (NW11) homeowners — London Borough of Barnet validation and local constraints handled from the start.
Golders Green (NW11) contains two very different designations. The Golders Green conservation area covers the Edwardian and interwar core around Golders Green Road and Hoop Lane. To the north-east lies Hampstead Garden Suburb — a planned Arts and Crafts estate that is one of the most tightly controlled residential environments in London, and Barnet has an Article 4 direction covering it.
That Article 4 direction is the single most important fact for anyone building in the Suburb: it removes permitted development rights across the conservation area, so even modest external work needs a full planning application. Because the Suburb was designed as a complete composition, the controls extend past the buildings to the hedge lines, materials and rooflines that make up the original scheme — a level of detail most London conservation areas do not reach. Barnet's separate HMO Article 4 direction removes the permitted change to small houses in multiple occupation across the district. We establish whether an NW11 address is inside the Suburb boundary before drawing to Barnet's guidance, because the answer changes the entire route to consent.
Planning in Golders Green (NW11): what to know before you apply
NW11 spans two conservation areas with very different regimes. Hampstead Garden Suburb is covered by a Barnet Article 4 direction removing permitted development rights across the Suburb, so even modest external alterations need a full planning application, and because the Suburb is a planned Arts and Crafts composition the controls extend to hedge lines, materials and rooflines as part of the original design. The Golders Green conservation area controls the Edwardian and interwar core around Golders Green Road. Barnet's HMO Article 4 direction also removes the permitted change to small houses in multiple occupation across the district.
Typical Golders Green housing stock
Edwardian and interwar semi-detached and detached houses around Golders Green Road and Hoop Lane, and the planned Arts and Crafts housing of Hampstead Garden Suburb toward Temple Fortune.
Streets we regularly draw for in Golders Green
Golders Green Road · Finchley Road · Hoop Lane · Temple Fortune Lane
What NW11 is actually built of
Measured from 428 classified residential buildings in NW11, not from a description of the area.
Golders Green NW11 housing mix
Residential building form across the NW11 postcode district, from 428 classified buildings.
| Attached on more than one side | 21% |
|---|---|
| Attached on one side | 61% |
| Detached | 18% |
| Median building footprint | 95 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.51 |
| Buildings classified | 428 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Measured Building Survey for Golders Green (NW11) homes: the package and the process
A measured survey is the foundation every later drawing is checked against. We record the building as found — floor plans, elevations, sections, levels and, where needed, the position of structure and services — to a stated tolerance, so nothing downstream rests on an assumption about what is there.
The deliverable is chosen for what happens next. A conversion or extension design wants a layered CAD file that a designer can build on; a party wall or dilapidations matter wants dimensioned PDFs that stand on their own as a record. We agree that before the survey, because it changes what we capture.
Survey effort follows the building, not the floor area. A regular detached house measures quickly; a terrace with a rear outrigger, split levels, and a century of alterations takes longer because the survey has to record what was actually built rather than what the plan form implies.
Why does a planning or building regulations application need a measured survey?
A planning or building regulations application needs to show the existing building accurately alongside the proposed changes, so the council or Building Control can judge the impact of the work against what is actually there. Existing plans, elevations and sections drawn from an accurate measured survey give the borough confidence that the proposal has been designed against real dimensions, and give your builder a reliable set of drawings to price and build from — an application based on inaccurate or assumed dimensions risks queries, delays, or a design that does not translate cleanly on site.
What does a measured building survey capture?
The survey records everything needed to produce accurate existing drawings: internal room dimensions and floor-to-ceiling heights on every level, the position, width and height of every door and window, wall thicknesses, staircase dimensions and headroom, roof shape and pitch, chimney breasts and structural features, and the external footprint and boundary relationship of the property. Where relevant to the project, we also record ground levels, existing drainage runs and neighbouring boundary conditions.
This is captured with a laser distance meter rather than a tape measure, which keeps the survey accurate to within a few millimetres across a whole property and removes the cumulative measuring error that can creep into a hand-measured survey of a larger or more complex building.
Can I reuse an old survey or estate agent floor plan instead?
Generally, no — estate agent floor plans are produced for marketing purposes and are not dimensionally accurate enough to design an extension or loft conversion against, and a previous owner's drawings may not reflect alterations made since, or may simply be inaccurate to begin with. A fresh measured survey is a modest cost relative to the overall project and is the single best way to avoid a redesign once a builder is on site and finds the real dimensions differ from the drawings.
| Output drawing | Relies on the measured survey for |
|---|---|
| Floor plans | Accurate room dimensions and layout for sale, letting or lease use |
| Planning drawings | Existing plans, elevations and sections to compare against the proposal |
| Building regulations drawings | Accurate existing structure to design technical compliance against |
| Structural calculations | True spans, floor-to-ceiling heights and existing structural elements |
Measured Building Survey in Golders Green NW11 — FAQs
How much does a measured building survey cost?+
How long does a measured survey take?+
Is a measured survey the same as a floor plan?+
Do I need a measured survey if I am only doing internal work?+
Can the survey be used for more than one purpose?+
Do I need planning permission for a loft or extension in Barnet?+
What is different about building in Hampstead Garden Suburb?+
Is a hip-to-gable loft conversion allowed on my Barnet semi?+
How long does Barnet take to decide an application?+
How much do Barnet planning drawings cost?+
Get your free Golders Green planning assessment
Tell us your Golders Green (NW11) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.