Mansard Loft Conversion Drawings in Barnes SW13
Fixed-fee, MCIAT-chartered mansard loft conversion drawings for Barnes (SW13) homeowners — London Borough of Richmond upon Thames validation and local constraints handled from the start.
Barnes (SW13) is an unusually intact riverside village in Richmond, and it is heavily conservation-controlled: four conservation areas — Barnes Common, Barnes Green, Castelnau and Madrid Road — cover most of the housing. Whether a property sits inside one of those boundaries, and often it does, is the single biggest factor in how an extension, loft or elevation change is designed and assessed.
The Thames wraps the neighbourhood on two sides, so riverside houses along Lonsdale Road and the Terrace also carry flood-zone considerations, and Barnes Common is protected metropolitan open land. We map a Barnes property against the conservation, flood-zone and open-land boundaries first, then design the drawings to Richmond's residential and conservation guidance so the application is validated without a query.
Planning in Barnes (SW13): what to know before you apply
SW13 has no householder Article 4 direction, but its four conservation areas mean permitted development cannot be assumed across most of Barnes, and riverside properties along Lonsdale Road sit within the Thames flood zone — both are checked before we recommend a route.
Typical Barnes housing stock
Victorian and Edwardian terraces and cottages around Barnes Green and the village, the grand Italianate semi-detached villas along Castelnau toward Hammersmith Bridge, and riverside houses fronting the Thames on Lonsdale Road.
Streets we regularly draw for in Barnes
Church Road · Castelnau · White Hart Lane · Lonsdale Road
What SW13 is actually built of
Measured from 328 classified residential buildings in SW13, not from a description of the area.
Barnes SW13 housing mix
Residential building form across the SW13 postcode district, from 328 classified buildings.
| Attached on more than one side | 48% |
|---|---|
| Attached on one side | 47% |
| Detached | 5% |
| Median building footprint | 75 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.29 |
| Buildings classified | 328 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Mansard Loft Conversion Drawings for Barnes (SW13) homes: the package and the process
A mansard is a rebuild of the roof, so the drawings carry more structure than a dormer scheme: the new front and rear slopes with their pitch angles set out, the upstand and party wall junctions, the parapet and gutter detail, and a street-scene elevation showing the new roof against its neighbours.
That street scene usually decides the application. Where a terrace already has approved mansards, the drawing shows the new roof matching their line, pitch and window rhythm; where it would be the first, the case is made on the roof form itself. Either way the argument is drawn, not written.
Mansards belong to terraces and to parapeted stock. The form works because a near-vertical rear wall can rise off the party walls and sit behind a parapet, which is why it is the usual answer in tightly controlled streets and rarely the right answer on a detached house.
What is a mansard loft conversion?
A mansard replaces the rear roof slope — or, less commonly, the front and rear slopes together — with a new near-vertical wall rising from the party walls to a shallow flat roof at the ridge, with small dormer windows set into it. Unlike a dormer, which sits within the existing roof, a mansard changes the shape of the roof itself, which is why it is usually reserved for terraces where the extra headroom and floor area are worth the more involved planning and construction process. Because the new wall runs almost the full width of the house between the party walls, a mansard typically delivers noticeably more usable floor area than a single dormer of any kind, which is why it remains the preferred option on period terraces where every square metre of loft counts.
Does a mansard loft conversion need planning permission in London?
Yes, almost always. Permitted development rights for roof alterations are volume- and shape-limited, and a mansard goes well beyond what those limits allow because it materially alters the roof's profile rather than adding to it. Every mansard we draw is prepared as a full householder planning application, with a design and access statement where the borough requires one, so the council can properly assess the change to the roofline and its impact on neighbours and the street scene.
Why do conservation areas favour mansards?
Many London conservation areas already contain mansard roofs as part of the original streetscape — grand Georgian and Victorian terraces were frequently built with a mansard attic storey behind a parapet, so a matching modern mansard often reads as a restoration of the intended roofline rather than an alteration. Getting that read right depends on matching the existing slate or tile colour, the proportion and spacing of the dormer windows, and the eaves and parapet detailing of the host terrace — details we design in from the first drawing rather than treating as an afterthought.
- Slate or tile colour and coursing matched to the existing roof and neighbouring properties
- Dormer window proportions and spacing aligned to the terrace's existing rhythm
- Eaves, parapet and party wall junctions detailed to sit flush with neighbouring roofs
| Package | Scope | Planning route | Fee from |
|---|---|---|---|
| Rear mansard, planning only | Design, planning drawings and supporting statement | Householder planning | £1,600 |
| Rear mansard, planning and building regs | Planning drawings plus structural and Part L detailing | Householder planning | £2,200 |
| Front and rear mansard | Full roof rebuild on both slopes, with structural | Householder planning | £2,400 |
Mansard Loft Conversion Drawings in Barnes SW13 — FAQs
How much do mansard loft conversion drawings cost in London?+
Can a mansard ever be permitted development?+
How long do mansard drawings take?+
Will a mansard need scaffolding and affect the whole roof?+
Do you handle the party wall process as well as the drawings?+
Do I need planning permission for an extension in Richmond?+
My Richmond home is near the river — does flood risk affect my application?+
What does Richmond's Article 4 coverage mean in practice?+
How long does Richmond Council take to decide?+
How much do planning drawings cost in Richmond?+
Get your free Barnes planning assessment
Tell us your Barnes (SW13) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.