Rear kitchen extension interior in a Monken Hadley conservation area house, EN5, London Borough of Barnet

Monken Hadley · EN5 · Barnet

Hip-to-Gable Loft Conversion Drawings in Monken Hadley EN5

Fixed-fee, MCIAT-chartered hip-to-gable loft conversion drawings for Monken Hadley (EN5) homeowners — London Borough of Barnet validation and local constraints handled from the start.

Monken Hadley is the historic common-edge village at the top of EN5, on the Barnet side of the Enfield boundary, with Georgian and Victorian houses gathered around Hadley Green. Projects here are usually careful rear extensions, garden rooms or internal reworking that keep the period frontages intact.

The Monken Hadley Conservation Area and its Article 4 Direction cover many houses around the green and common, and a number are listed. We check the conservation-area boundary, listing status and Article 4 scope before advising whether anything can proceed as permitted development or needs a full planning and heritage submission.

Proposed floor plan

Monken Hadley EN5

Monken Hadley (EN5) — planning at a glance

Council: London Borough of Barnet
Postcode district: EN5
Planning portal: View the Barnet planning portal
Housing stock: Georgian and early-Victorian houses and cottages ranged around Hadley Green and the common, many listed, alongside later Victorian villas. Brick and render frontages, sash windows and long rear gardens are typical.
Article 4: Barnet's Monken Hadley Article 4 Direction removes householder permitted development over many houses around the green and common, so even modest external changes need planning permission.
Conservation: Monken Hadley Conservation AreaWood Street Conservation Area
Sample streets: Hadley Green Road · Hadley Common · Dury Road · Bakers Hill
Local constraints: Monken Hadley Conservation Area protects the historic village setting around the green, with many houses individually listedAn Article 4 Direction removes permitted development over many properties, so even small external works need planning permissionMonken Hadley Common and the surrounding Green Belt limit how far extensions can extend on plots backing onto open land

Planning in Monken Hadley (EN5): what to know before you apply

Most external work in Monken Hadley needs full planning permission with a heritage statement, because the conservation area and Article 4 Direction remove permitted development and many houses are listed. Where a property is listed, separate listed building consent is also required for internal and external alterations.

Typical Monken Hadley housing stock

Georgian and early-Victorian houses and cottages ranged around Hadley Green and the common, many listed, alongside later Victorian villas. Brick and render frontages, sash windows and long rear gardens are typical.

Streets we regularly draw for in Monken Hadley

Hadley Green Road · Hadley Common · Dury Road · Bakers Hill

What EN5 is actually built of

Measured from 438 classified residential buildings in EN5, not from a description of the area.

Monken Hadley EN5 housing mix

Residential building form across the EN5 postcode district, from 438 classified buildings.

Attached on more than one side	25%
Attached on one side	55%
Detached	20%
Median building footprint	73 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	1.99
Buildings classified	438

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Hip-to-Gable Loft Conversion Drawings for Monken Hadley (EN5) homes: the package and the process

The hip-to-gable case is made on the end elevation. The drawings show the existing hipped roof and the proposed gable side by side at the same scale, with the new brickwork or tile hanging set out, the ridge extended to its new length, and the junction with any neighbouring roof made explicit.

Because the work changes the roof at the boundary, the section and the end elevation also have to show the party wall line and how the new gable is built off it. Where the property is one of a pair, we draw the neighbouring roof too — an officer assessing the effect on the pair needs to see both.

The conversion needs a hip to work on, which limits it to semi-detached, detached and end-of-terrace houses — a mid-terrace has no hipped end to rebuild. On a semi, the new gable also has to be drawn against the neighbour's roof, since the pair was designed to read as one.

What is a hip-to-gable loft conversion?

A hipped roof slopes inward on all sides, including the end wall, rather than finishing in a flat vertical gable. A hip-to-gable conversion rebuilds that sloping hip as a vertical wall, in line with the existing side elevation below, squaring off the roof shape and creating a much larger, more usable loft footprint along that side without altering the rear or front roof slopes at all. It is one of the more straightforward roof alterations to build, because the new gable wall follows the line of the existing external wall rather than introducing a new roof form, which keeps both the design and the construction relatively contained compared with a full mansard rebuild.

Suits semi-detached and end-of-terrace houses with a hipped roof on the side elevation
Squares off the roof by rebuilding the sloping hip as a vertical gable wall
Leaves the front and rear roof slopes untouched

Is a hip-to-gable loft conversion permitted development?

Often, yes. For semi-detached and detached houses, permitted development rules allow more than one hip to be converted to a gable, provided the new roof does not exceed the height of the existing ridge and the total additional volume stays within the usual allowance — 50 cubic metres for detached and semi-detached homes. The new gable wall and roof materials should match the existing building, and the rules tighten or disappear entirely inside a conservation area or under an Article 4 direction, both of which we check before recommending the route. Where a previous owner has already extended into the roof or added a large outbuilding, the remaining volume allowance can be smaller than expected, so we always confirm the running total against your specific property rather than assuming the full allowance is still available.

What is a hip-to-gable-plus-dormer conversion?

Combining a hip-to-gable conversion with a rear dormer is one of the most effective ways to maximise a loft on a semi-detached or end-of-terrace house: the gable squares off the side of the roof while the dormer adds headroom over the rear slope and stairwell, together often creating close to a full-width habitable floor. We assess both elements together from the first survey — see our dormer loft conversion page for how the rear element is designed — rather than drawing a hip-to-gable in isolation and bolting on a dormer later. Because both elements are often permitted development on their own, the combined scheme frequently still fits within the same volume allowance, though we always check the running total before confirming the route.

Typical hip-to-gable loft conversion drawing packages
Conversion	Typical route	Structural scope	Fee from
Hip-to-gable only	Permitted development / LDC	New gable wall and rafter tie-in	£1,300
Hip-to-gable plus rear dormer	Permitted development / LDC where eligible	Gable wall plus dormer structure	£1,450
Hip-to-gable in a conservation area	Householder planning	New gable wall and rafter tie-in	£1,600

Sheet from a hip-to-gable loft conversion drawings package drawn for a Monken Hadley property in EN5, showing the existing and proposed arrangement at scale — A sheet from the hip-to-gable loft conversion drawings package we submit to London Borough of Barnet for Monken Hadley (EN5) properties.

Also in Monken Hadley EN5

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings Hip-to-Gable Loft Conversion Drawings across Barnet Hip-to-Gable Loft Conversion Drawings across London

FAQ

Hip-to-Gable Loft Conversion Drawings in Monken Hadley EN5 — FAQs

How much do hip-to-gable loft conversion drawings cost in London?+

A hip-to-gable conversion on its own typically starts around £1,300. Combining it with a rear dormer usually costs a little more, around £1,450, to cover the additional structural design — we confirm the fixed fee once we have surveyed your roof.

Will my semi-detached house qualify for permitted development?+

Often, but it depends on the volume already used, whether the property sits in a conservation area or under an Article 4 direction, and whether previous extensions have already used up the allowance. We check this free before recommending a route.

How long do hip-to-gable drawings take?+

Typically around 7 days from survey to a full drawing set in your online portal, whether the route is a Lawful Development Certificate or full planning.

Do I need an architect for a hip-to-gable conversion?+

No — as MCIAT-chartered architectural technologists we produce the same council-accepted drawings, with structural calculations coordinated in-house, typically at a lower fee than an architecture practice.

What building regulations apply to a hip-to-gable loft?+

The same core requirements as any loft conversion: a protected stairway or upgraded fire doors, a compliant means-of-escape window, structural calculations for the new gable wall and floor, and insulation upgraded to current Part L standards. We coordinate all of this alongside the planning or Lawful Development Certificate drawings.

Do I need planning permission for a loft or extension in Barnet?+

Across Finchley, Edgware and Hendon, Barnet's 1930s semis usually keep permitted development rights for rear extensions and hip-to-gable or dormer lofts, so a full application isn't always needed. The major exception is Hampstead Garden Suburb, where an Article 4 direction removes almost all permitted development rights. We check your address first and confirm permitted development with a Lawful Development Certificate where it applies.

What is different about building in Hampstead Garden Suburb?+

The Suburb has one of the most far-reaching Article 4 directions in London: almost all external alterations need planning permission, and the Hampstead Garden Suburb Trust must also consent to changes in parallel with the council. We handle both tracks — a carefully evidenced planning application to Barnet and the Trust's design requirements — since approval there depends on respecting the Arts-and-Crafts character precisely.

Is a hip-to-gable loft conversion allowed on my Barnet semi?+

Usually, yes. The borough's abundant interwar semis are well suited to hip-to-gable and dormer conversions, which frequently qualify as permitted development on semi-detached homes within the volume limits. Outside conservation areas and the Suburb, this is often the quickest route. We confirm eligibility, then produce the planning and building-regulations drawings.

How long does Barnet take to decide an application?+

Barnet determines most householder applications within the statutory eight-week period once validated; Suburb and conservation cases can involve additional consultation. We prepare Barnet submissions to the validation checklist, with the elevations and materials detail the council expects, to avoid the drawing queries that are the usual cause of delay.

How much do Barnet planning drawings cost?+

We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Barnet approves. A straightforward Finchley loft and a Hampstead Garden Suburb application differ in the evidence required, so we quote once we have seen the project and know which route applies.

Free Fixed Quote

Get your free Monken Hadley planning assessment

Tell us your Monken Hadley (EN5) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.