Hip-to-Gable Loft Conversion Drawings in Eltham SE9
Fixed-fee, MCIAT-chartered hip-to-gable loft conversion drawings for Eltham (SE9) homeowners — Royal Borough of Greenwich validation and local constraints handled from the start.
Eltham (SE9) sits in the Royal Borough of Greenwich and is best known for the Progress Estate at Well Hall — a 1915 Arts-and-Crafts garden suburb that inspired much interwar housing and has been a conservation area since 1971. An Article 4 direction covers the estate, so on those streets even small external changes need consent, and rear and loft projects have to be handled with real care for the original detailing.
Away from the estate, much of Eltham is consistent interwar semi-detached and terraced housing where side-return, rear and loft projects are the staple. The district also carries the setting of Eltham Palace and its listed gardens. We check where an Eltham property sits relative to the Progress Estate Article 4 area and the palace setting before recommending a permitted-development or full-application route under Greenwich's guidance.
Planning in Eltham (SE9): what to know before you apply
Eltham's Progress Estate at Well Hall carries a conservation-area designation and an Article 4 direction (1973), so permitted-development rights are removed across the estate and external changes need planning permission. Elsewhere in SE9 many interwar houses retain PD rights for rear and loft work, but the consistent frontages and the setting of Grade I listed Eltham Palace mean elevation and roof changes are assessed closely. We confirm which controls apply to a specific address before drawing.
Typical Eltham housing stock
The 1915 Arts-and-Crafts cottages and greens of the Progress Estate around Well Hall Road, interwar semi-detached and terraced housing across much of Eltham, and later post-war housing toward Mottingham and New Eltham.
Streets we regularly draw for in Eltham
Well Hall Road · Court Road · Eltham High Street · Ross Way
What SE9 is actually built of
Measured from 511 classified residential buildings in SE9, not from a description of the area.
Eltham SE9 housing mix
Residential building form across the SE9 postcode district, from 511 classified buildings.
| Attached on more than one side | 39% |
|---|---|
| Attached on one side | 57% |
| Detached | 4% |
| Median building footprint | 62 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.22 |
| Buildings classified | 511 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Hip-to-Gable Loft Conversion Drawings for Eltham (SE9) homes: the package and the process
The hip-to-gable case is made on the end elevation. The drawings show the existing hipped roof and the proposed gable side by side at the same scale, with the new brickwork or tile hanging set out, the ridge extended to its new length, and the junction with any neighbouring roof made explicit.
Because the work changes the roof at the boundary, the section and the end elevation also have to show the party wall line and how the new gable is built off it. Where the property is one of a pair, we draw the neighbouring roof too — an officer assessing the effect on the pair needs to see both.
The conversion needs a hip to work on, which limits it to semi-detached, detached and end-of-terrace houses — a mid-terrace has no hipped end to rebuild. On a semi, the new gable also has to be drawn against the neighbour's roof, since the pair was designed to read as one.
What is a hip-to-gable loft conversion?
A hipped roof slopes inward on all sides, including the end wall, rather than finishing in a flat vertical gable. A hip-to-gable conversion rebuilds that sloping hip as a vertical wall, in line with the existing side elevation below, squaring off the roof shape and creating a much larger, more usable loft footprint along that side without altering the rear or front roof slopes at all. It is one of the more straightforward roof alterations to build, because the new gable wall follows the line of the existing external wall rather than introducing a new roof form, which keeps both the design and the construction relatively contained compared with a full mansard rebuild.
- Suits semi-detached and end-of-terrace houses with a hipped roof on the side elevation
- Squares off the roof by rebuilding the sloping hip as a vertical gable wall
- Leaves the front and rear roof slopes untouched
Is a hip-to-gable loft conversion permitted development?
Often, yes. For semi-detached and detached houses, permitted development rules allow more than one hip to be converted to a gable, provided the new roof does not exceed the height of the existing ridge and the total additional volume stays within the usual allowance — 50 cubic metres for detached and semi-detached homes. The new gable wall and roof materials should match the existing building, and the rules tighten or disappear entirely inside a conservation area or under an Article 4 direction, both of which we check before recommending the route. Where a previous owner has already extended into the roof or added a large outbuilding, the remaining volume allowance can be smaller than expected, so we always confirm the running total against your specific property rather than assuming the full allowance is still available.
What is a hip-to-gable-plus-dormer conversion?
Combining a hip-to-gable conversion with a rear dormer is one of the most effective ways to maximise a loft on a semi-detached or end-of-terrace house: the gable squares off the side of the roof while the dormer adds headroom over the rear slope and stairwell, together often creating close to a full-width habitable floor. We assess both elements together from the first survey — see our dormer loft conversion page for how the rear element is designed — rather than drawing a hip-to-gable in isolation and bolting on a dormer later. Because both elements are often permitted development on their own, the combined scheme frequently still fits within the same volume allowance, though we always check the running total before confirming the route.
| Conversion | Typical route | Structural scope | Fee from |
|---|---|---|---|
| Hip-to-gable only | Permitted development / LDC | New gable wall and rafter tie-in | £1,300 |
| Hip-to-gable plus rear dormer | Permitted development / LDC where eligible | Gable wall plus dormer structure | £1,450 |
| Hip-to-gable in a conservation area | Householder planning | New gable wall and rafter tie-in | £1,600 |
Hip-to-Gable Loft Conversion Drawings in Eltham SE9 — FAQs
How much do hip-to-gable loft conversion drawings cost in London?+
Will my semi-detached house qualify for permitted development?+
How long do hip-to-gable drawings take?+
Do I need an architect for a hip-to-gable conversion?+
What building regulations apply to a hip-to-gable loft?+
Do I need planning permission for an extension in Greenwich?+
How does the Maritime Greenwich World Heritage Site affect my project?+
Can I extend a home in Blackheath or Westcombe Park?+
How long does the Royal Borough of Greenwich take to decide?+
How much do planning drawings cost in Greenwich?+
Get your free Eltham planning assessment
Tell us your Eltham (SE9) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.