Hip-to-Gable Loft Conversion Drawings in Brook Green W6
Fixed-fee, MCIAT-chartered hip-to-gable loft conversion drawings for Brook Green (W6) homeowners — London Borough of Hammersmith & Fulham validation and local constraints handled from the start.
Brook Green in W6 is a sought-after enclave of large Victorian terraces and Edwardian mansion blocks in the green space between Hammersmith and Kensington. Families here typically extend at the rear or into the side return, convert generous lofts, or reconfigure mansion flats, so most of our drawings support space-making projects on characterful period homes.
The Brook Green conservation area and neighbouring designations mean roof alterations, front elevations and materials are all assessed against a strikingly consistent streetscape. We detail schemes to sit comfortably within that grain and present them the way Hammersmith and Fulham's officers expect, which keeps sensitive extensions and loft conversions moving smoothly towards approval.
Planning in Brook Green (W6): what to know before you apply
There is no published householder Article 4 direction we depend on for Brook Green, but the Brook Green conservation area constrains permitted development on roofs and principal elevations. Matching red-brick detail, respecting the scale of the terraces, and checking for protected street trees are the usual design limits on rear and roof works.
Typical Brook Green housing stock
Brook Green is a leafy pocket of large Victorian terraces and red-brick Edwardian mansion blocks set between Hammersmith and Kensington. The generous houses lend themselves to full-width rear extensions, side returns and loft conversions, while the mansion blocks generate careful internal reconfigurations and flat conversions that suit family life in W6.
Streets we regularly draw for in Brook Green
Yeldham Road · Winslow Road · Sussex Place · Playfair Street
What W6 is actually built of
Measured from 388 classified residential buildings in W6, not from a description of the area.
Brook Green W6 housing mix
Residential building form across the W6 postcode district, from 388 classified buildings.
| Attached on more than one side | 80% |
|---|---|
| Attached on one side | 17% |
| Detached | 3% |
| Median building footprint | 63 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 2.68 |
| Buildings classified | 388 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Hip-to-Gable Loft Conversion Drawings for Brook Green (W6) homes: the package and the process
The hip-to-gable case is made on the end elevation. The drawings show the existing hipped roof and the proposed gable side by side at the same scale, with the new brickwork or tile hanging set out, the ridge extended to its new length, and the junction with any neighbouring roof made explicit.
Because the work changes the roof at the boundary, the section and the end elevation also have to show the party wall line and how the new gable is built off it. Where the property is one of a pair, we draw the neighbouring roof too — an officer assessing the effect on the pair needs to see both.
The conversion needs a hip to work on, which limits it to semi-detached, detached and end-of-terrace houses — a mid-terrace has no hipped end to rebuild. On a semi, the new gable also has to be drawn against the neighbour's roof, since the pair was designed to read as one.
What is a hip-to-gable loft conversion?
A hipped roof slopes inward on all sides, including the end wall, rather than finishing in a flat vertical gable. A hip-to-gable conversion rebuilds that sloping hip as a vertical wall, in line with the existing side elevation below, squaring off the roof shape and creating a much larger, more usable loft footprint along that side without altering the rear or front roof slopes at all. It is one of the more straightforward roof alterations to build, because the new gable wall follows the line of the existing external wall rather than introducing a new roof form, which keeps both the design and the construction relatively contained compared with a full mansard rebuild.
- Suits semi-detached and end-of-terrace houses with a hipped roof on the side elevation
- Squares off the roof by rebuilding the sloping hip as a vertical gable wall
- Leaves the front and rear roof slopes untouched
Is a hip-to-gable loft conversion permitted development?
Often, yes. For semi-detached and detached houses, permitted development rules allow more than one hip to be converted to a gable, provided the new roof does not exceed the height of the existing ridge and the total additional volume stays within the usual allowance — 50 cubic metres for detached and semi-detached homes. The new gable wall and roof materials should match the existing building, and the rules tighten or disappear entirely inside a conservation area or under an Article 4 direction, both of which we check before recommending the route. Where a previous owner has already extended into the roof or added a large outbuilding, the remaining volume allowance can be smaller than expected, so we always confirm the running total against your specific property rather than assuming the full allowance is still available.
What is a hip-to-gable-plus-dormer conversion?
Combining a hip-to-gable conversion with a rear dormer is one of the most effective ways to maximise a loft on a semi-detached or end-of-terrace house: the gable squares off the side of the roof while the dormer adds headroom over the rear slope and stairwell, together often creating close to a full-width habitable floor. We assess both elements together from the first survey — see our dormer loft conversion page for how the rear element is designed — rather than drawing a hip-to-gable in isolation and bolting on a dormer later. Because both elements are often permitted development on their own, the combined scheme frequently still fits within the same volume allowance, though we always check the running total before confirming the route.
| Conversion | Typical route | Structural scope | Fee from |
|---|---|---|---|
| Hip-to-gable only | Permitted development / LDC | New gable wall and rafter tie-in | £1,300 |
| Hip-to-gable plus rear dormer | Permitted development / LDC where eligible | Gable wall plus dormer structure | £1,450 |
| Hip-to-gable in a conservation area | Householder planning | New gable wall and rafter tie-in | £1,600 |
Hip-to-Gable Loft Conversion Drawings in Brook Green W6 — FAQs
How much do hip-to-gable loft conversion drawings cost in London?+
Will my semi-detached house qualify for permitted development?+
How long do hip-to-gable drawings take?+
Do I need an architect for a hip-to-gable conversion?+
What building regulations apply to a hip-to-gable loft?+
Do I need planning permission for a side-return extension in Hammersmith & Fulham?+
Will I need a Basement Impact Assessment for a basement in Hammersmith & Fulham?+
What is special about the Peterborough Estate 'Lion houses'?+
How long does Hammersmith & Fulham take to decide?+
How much do planning drawings cost in Hammersmith & Fulham?+
Get your free Brook Green planning assessment
Tell us your Brook Green (W6) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.