Double Storey Extension Drawings in Hillingdon UB10
Fixed-fee, MCIAT-chartered double storey extension drawings for Hillingdon (UB10) homeowners — London Borough of Hillingdon validation and local constraints handled from the start.
UB10 spans two distinct worlds: the historic village cores of Ickenham and Hillingdon Village, and the large belt of 1930s suburban semis and detached houses around them where most rear and loft projects happen. On the suburban stock the design conversation is about matching established roofline and frontage patterns, which Hillingdon's guidance sets out clearly.
Inside either village conservation area the emphasis shifts to protecting period character around St Giles and St John the Baptist churches, so materials, rooflines and boundary treatments face tighter control. Because the two conservation-area boundaries are compact, we confirm exactly where a UB10 property falls before choosing a permitted-development or full-application route.
Planning in Hillingdon (UB10): what to know before you apply
Most UB10 householder work sits on interwar suburban housing outside the conservation areas, where Hillingdon has well-established expectations for rear depth, side returns and dormers. The Ickenham Village and Hillingdon Village conservation areas are the exceptions — there, heritage-led design and usually a full application are the right approach.
Typical Hillingdon housing stock
Two protected village centres — Ickenham around St Giles Church and Hillingdon Village around St John the Baptist — of period cottages and Victorian houses, ringed by the substantial 1930s semi-detached and detached suburban stock that makes up most of the wider UB10 postcode.
Streets we regularly draw for in Hillingdon
Swakeleys Road · Austin's Lane · Royal Lane · Vine Lane
What UB10 is actually built of
Measured from 318 classified residential buildings in UB10, not from a description of the area.
Hillingdon UB10 housing mix
Residential building form across the UB10 postcode district, from 318 classified buildings.
| Attached on more than one side | 28% |
|---|---|
| Attached on one side | 46% |
| Detached | 27% |
| Median building footprint | 71 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.13 |
| Buildings classified | 318 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Double Storey Extension Drawings for Hillingdon (UB10) homes: the package and the process
At first-floor level the drawings have to answer for daylight, privacy and massing. That means proposed elevations showing every new window with its position relative to the boundary, a section taken through the extension and the neighbouring building, and a roof form drawn to sit below the existing ridge rather than compete with it.
We draw the neighbouring property alongside your own, because the officer's assessment is comparative — the effect on their windows and outlook is the test. Setting the first floor in from the boundary, and showing that set-back as a dimension, resolves most objections before consultation begins.
At first floor the boundary relationship decides everything. A detached house has room to set the addition in on both sides; a semi has one shared wall and one clear flank; a mid-terrace can usually only go to the rear, where the effect on both neighbours has to be drawn.
Do I need planning permission for a double storey extension in London?
Almost always. Permitted development rights for two-storey extensions are far more restrictive than for single-storey work, particularly on how close the new structure can come to a boundary and how closely its roof pitch and eaves height must match the existing house, so most double storey projects are drawn and submitted as full householder planning applications rather than relying on permitted development.
Where the property sits in a conservation area or is subject to an Article 4 direction, any remaining permitted development allowance for a second storey is typically removed entirely, reinforcing the need for a full application. We check your property's status and your borough's design guidance before drawing.
How do councils control the impact of a double storey extension on neighbours?
Because a second storey introduces new windows and massing at first-floor level, London boroughs apply design guidance aimed specifically at protecting neighbouring light, privacy and outlook.
- The 45-degree rule, tested at neighbouring windows, to check the extension does not block an unreasonable amount of daylight
- A common design expectation that a two-storey side extension is set in roughly 1 metre from the shared boundary, rather than built hard against it
- A first floor commonly set back from the ground floor front elevation, so the upper storey reads as subordinate to the main house from the street
- Obscure or high-level glazing on flank walls facing directly into a neighbour's garden or windows, to limit overlooking
Matching the roofline and materials
Planning officers assess a double storey extension heavily on how convincingly it reads as part of the original house rather than an addition bolted onto the side. Our drawings match ridge height, roof pitch, eaves detail and brick or render finish to the existing building wherever the design brief allows, which is consistently one of the strongest factors in securing approval without delay or redesign. Where a subtly contrasting material is proposed instead — a different brick tone, or a zinc or slate roof against a tiled original — we set it out clearly on the elevations so the design intent reads as deliberate rather than a mismatch, which is how most London boroughs prefer a genuine design statement to be presented.
| Option | What it adds | Typical fee |
|---|---|---|
| Single-storey rear extension | A ground-floor kitchen-diner only, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Double storey side or rear extension | Two rooms across two floors, usually needs full planning | Full Planning pack ~£1,600–£2,400 |
| Double storey + Building Regulations (structural) | Combined pack including structural calculations for two-floor loads and foundations | Planning + Building Regs pack ~£2,200–£3,850 |
| Wraparound (rear + side return) | Combines two single-storey extensions into one L-shaped ground floor | see Wraparound Extension Drawings, from £2,200 |
Double Storey Extension Drawings in Hillingdon UB10 — FAQs
How much does a double storey extension cost to design in London?+
Do I need planning permission to add a second storey?+
Will a double storey extension overlook my neighbour's garden?+
Do I need an architect for a double storey extension?+
How long does it take to get double storey extension drawings?+
Do I need planning permission for a loft conversion in Hillingdon?+
How does the Colne Valley green belt affect my Hillingdon project?+
Does proximity to Heathrow affect my plans?+
How long does Hillingdon Council take to decide?+
How much do planning drawings cost in Hillingdon?+
Get your free Hillingdon planning assessment
Tell us your Hillingdon (UB10) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.