Double Storey Extension Drawings in Cricklewood NW2
Fixed-fee, MCIAT-chartered double storey extension drawings for Cricklewood (NW2) homeowners — London Borough of Brent validation and local constraints handled from the start.
Cricklewood (NW2) in Brent splits into two quite different halves for planning purposes. The Mapesbury streets — Mapesbury Road, Anson Road and their neighbours — are large late-Victorian and Edwardian villas inside the Mapesbury conservation area, and Brent has an Article 4 direction covering it. The Broadway side is denser Victorian terrace and interwar stock.
The Mapesbury Article 4 direction is the decisive fact for anyone working on the villa streets: it removes permitted development rights across the conservation area, so rear and roof projects there need a full planning application rather than proceeding under permitted development. Separately, Brent's HMO Article 4 directions remove the permitted change to small houses in multiple occupation across the district, so an NW2 HMO conversion needs planning permission — a common trip-up on the larger villas, which are exactly the properties people try to convert. We check whether an NW2 address is inside the Mapesbury boundary before drawing to Brent's guidance.
Planning in Cricklewood (NW2): what to know before you apply
NW2 carries the Mapesbury Article 4 direction, which removes permitted development rights across the Mapesbury conservation area — so rear and loft projects on those villa streets need a full planning application, not permitted development. Brent's HMO Article 4 directions separately remove the permitted change to small houses in multiple occupation across the district, meaning any NW2 HMO conversion requires planning permission. Outside the Mapesbury boundary, the Broadway-side terraces retain more permitted development scope.
Typical Cricklewood housing stock
Large late-Victorian and Edwardian villas and semi-detached houses on the Mapesbury streets, with denser Victorian terraces and interwar housing along the Broadway and toward the north.
Streets we regularly draw for in Cricklewood
Cricklewood Broadway · Cricklewood Lane · Mapesbury Road · Anson Road
What NW2 is actually built of
Measured from 414 classified residential buildings in NW2, not from a description of the area.
Cricklewood NW2 housing mix
Residential building form across the NW2 postcode district, from 414 classified buildings.
| Attached on more than one side | 43% |
|---|---|
| Attached on one side | 49% |
| Detached | 8% |
| Median building footprint | 78 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 2.27 |
| Buildings classified | 414 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Double Storey Extension Drawings for Cricklewood (NW2) homes: the package and the process
At first-floor level the drawings have to answer for daylight, privacy and massing. That means proposed elevations showing every new window with its position relative to the boundary, a section taken through the extension and the neighbouring building, and a roof form drawn to sit below the existing ridge rather than compete with it.
We draw the neighbouring property alongside your own, because the officer's assessment is comparative — the effect on their windows and outlook is the test. Setting the first floor in from the boundary, and showing that set-back as a dimension, resolves most objections before consultation begins.
At first floor the boundary relationship decides everything. A detached house has room to set the addition in on both sides; a semi has one shared wall and one clear flank; a mid-terrace can usually only go to the rear, where the effect on both neighbours has to be drawn.
Do I need planning permission for a double storey extension in London?
Almost always. Permitted development rights for two-storey extensions are far more restrictive than for single-storey work, particularly on how close the new structure can come to a boundary and how closely its roof pitch and eaves height must match the existing house, so most double storey projects are drawn and submitted as full householder planning applications rather than relying on permitted development.
Where the property sits in a conservation area or is subject to an Article 4 direction, any remaining permitted development allowance for a second storey is typically removed entirely, reinforcing the need for a full application. We check your property's status and your borough's design guidance before drawing.
How do councils control the impact of a double storey extension on neighbours?
Because a second storey introduces new windows and massing at first-floor level, London boroughs apply design guidance aimed specifically at protecting neighbouring light, privacy and outlook.
- The 45-degree rule, tested at neighbouring windows, to check the extension does not block an unreasonable amount of daylight
- A common design expectation that a two-storey side extension is set in roughly 1 metre from the shared boundary, rather than built hard against it
- A first floor commonly set back from the ground floor front elevation, so the upper storey reads as subordinate to the main house from the street
- Obscure or high-level glazing on flank walls facing directly into a neighbour's garden or windows, to limit overlooking
Matching the roofline and materials
Planning officers assess a double storey extension heavily on how convincingly it reads as part of the original house rather than an addition bolted onto the side. Our drawings match ridge height, roof pitch, eaves detail and brick or render finish to the existing building wherever the design brief allows, which is consistently one of the strongest factors in securing approval without delay or redesign. Where a subtly contrasting material is proposed instead — a different brick tone, or a zinc or slate roof against a tiled original — we set it out clearly on the elevations so the design intent reads as deliberate rather than a mismatch, which is how most London boroughs prefer a genuine design statement to be presented.
| Option | What it adds | Typical fee |
|---|---|---|
| Single-storey rear extension | A ground-floor kitchen-diner only, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Double storey side or rear extension | Two rooms across two floors, usually needs full planning | Full Planning pack ~£1,600–£2,400 |
| Double storey + Building Regulations (structural) | Combined pack including structural calculations for two-floor loads and foundations | Planning + Building Regs pack ~£2,200–£3,850 |
| Wraparound (rear + side return) | Combines two single-storey extensions into one L-shaped ground floor | see Wraparound Extension Drawings, from £2,200 |
Double Storey Extension Drawings in Cricklewood NW2 — FAQs
How much does a double storey extension cost to design in London?+
Do I need planning permission to add a second storey?+
Will a double storey extension overlook my neighbour's garden?+
Do I need an architect for a double storey extension?+
How long does it take to get double storey extension drawings?+
Do I need planning permission for a side-return extension in Brent?+
What does Brent's borough-wide HMO Article 4 direction affect?+
Is a hip-to-gable loft conversion allowed on my Brent semi?+
How long does Brent Council take to decide?+
How much do planning drawings cost in Brent?+
Get your free Cricklewood planning assessment
Tell us your Cricklewood (NW2) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.