Double Storey Extension Drawings in Barnes SW13
Fixed-fee, MCIAT-chartered double storey extension drawings for Barnes (SW13) homeowners — London Borough of Richmond upon Thames validation and local constraints handled from the start.
Barnes (SW13) is an unusually intact riverside village in Richmond, and it is heavily conservation-controlled: four conservation areas — Barnes Common, Barnes Green, Castelnau and Madrid Road — cover most of the housing. Whether a property sits inside one of those boundaries, and often it does, is the single biggest factor in how an extension, loft or elevation change is designed and assessed.
The Thames wraps the neighbourhood on two sides, so riverside houses along Lonsdale Road and the Terrace also carry flood-zone considerations, and Barnes Common is protected metropolitan open land. We map a Barnes property against the conservation, flood-zone and open-land boundaries first, then design the drawings to Richmond's residential and conservation guidance so the application is validated without a query.
Planning in Barnes (SW13): what to know before you apply
SW13 has no householder Article 4 direction, but its four conservation areas mean permitted development cannot be assumed across most of Barnes, and riverside properties along Lonsdale Road sit within the Thames flood zone — both are checked before we recommend a route.
Typical Barnes housing stock
Victorian and Edwardian terraces and cottages around Barnes Green and the village, the grand Italianate semi-detached villas along Castelnau toward Hammersmith Bridge, and riverside houses fronting the Thames on Lonsdale Road.
Streets we regularly draw for in Barnes
Church Road · Castelnau · White Hart Lane · Lonsdale Road
What SW13 is actually built of
Measured from 328 classified residential buildings in SW13, not from a description of the area.
Barnes SW13 housing mix
Residential building form across the SW13 postcode district, from 328 classified buildings.
| Attached on more than one side | 48% |
|---|---|
| Attached on one side | 47% |
| Detached | 5% |
| Median building footprint | 75 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.29 |
| Buildings classified | 328 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Double Storey Extension Drawings for Barnes (SW13) homes: the package and the process
At first-floor level the drawings have to answer for daylight, privacy and massing. That means proposed elevations showing every new window with its position relative to the boundary, a section taken through the extension and the neighbouring building, and a roof form drawn to sit below the existing ridge rather than compete with it.
We draw the neighbouring property alongside your own, because the officer's assessment is comparative — the effect on their windows and outlook is the test. Setting the first floor in from the boundary, and showing that set-back as a dimension, resolves most objections before consultation begins.
At first floor the boundary relationship decides everything. A detached house has room to set the addition in on both sides; a semi has one shared wall and one clear flank; a mid-terrace can usually only go to the rear, where the effect on both neighbours has to be drawn.
Do I need planning permission for a double storey extension in London?
Almost always. Permitted development rights for two-storey extensions are far more restrictive than for single-storey work, particularly on how close the new structure can come to a boundary and how closely its roof pitch and eaves height must match the existing house, so most double storey projects are drawn and submitted as full householder planning applications rather than relying on permitted development.
Where the property sits in a conservation area or is subject to an Article 4 direction, any remaining permitted development allowance for a second storey is typically removed entirely, reinforcing the need for a full application. We check your property's status and your borough's design guidance before drawing.
How do councils control the impact of a double storey extension on neighbours?
Because a second storey introduces new windows and massing at first-floor level, London boroughs apply design guidance aimed specifically at protecting neighbouring light, privacy and outlook.
- The 45-degree rule, tested at neighbouring windows, to check the extension does not block an unreasonable amount of daylight
- A common design expectation that a two-storey side extension is set in roughly 1 metre from the shared boundary, rather than built hard against it
- A first floor commonly set back from the ground floor front elevation, so the upper storey reads as subordinate to the main house from the street
- Obscure or high-level glazing on flank walls facing directly into a neighbour's garden or windows, to limit overlooking
Matching the roofline and materials
Planning officers assess a double storey extension heavily on how convincingly it reads as part of the original house rather than an addition bolted onto the side. Our drawings match ridge height, roof pitch, eaves detail and brick or render finish to the existing building wherever the design brief allows, which is consistently one of the strongest factors in securing approval without delay or redesign. Where a subtly contrasting material is proposed instead — a different brick tone, or a zinc or slate roof against a tiled original — we set it out clearly on the elevations so the design intent reads as deliberate rather than a mismatch, which is how most London boroughs prefer a genuine design statement to be presented.
| Option | What it adds | Typical fee |
|---|---|---|
| Single-storey rear extension | A ground-floor kitchen-diner only, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Double storey side or rear extension | Two rooms across two floors, usually needs full planning | Full Planning pack ~£1,600–£2,400 |
| Double storey + Building Regulations (structural) | Combined pack including structural calculations for two-floor loads and foundations | Planning + Building Regs pack ~£2,200–£3,850 |
| Wraparound (rear + side return) | Combines two single-storey extensions into one L-shaped ground floor | see Wraparound Extension Drawings, from £2,200 |
Double Storey Extension Drawings in Barnes SW13 — FAQs
How much does a double storey extension cost to design in London?+
Do I need planning permission to add a second storey?+
Will a double storey extension overlook my neighbour's garden?+
Do I need an architect for a double storey extension?+
How long does it take to get double storey extension drawings?+
Do I need planning permission for an extension in Richmond?+
My Richmond home is near the river — does flood risk affect my application?+
What does Richmond's Article 4 coverage mean in practice?+
How long does Richmond Council take to decide?+
How much do planning drawings cost in Richmond?+
Get your free Barnes planning assessment
Tell us your Barnes (SW13) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.