Rear extension on an interwar semi in Greenford UB6, planning drawings for Ealing Council approval

Greenford · UB6 · Ealing

Building Regulations Drawings in Greenford UB6

Fixed-fee, MCIAT-chartered building regulations drawings for Greenford (UB6) homeowners — London Borough of Ealing validation and local constraints handled from the start.

Greenford (UB6) is classic outer-west-London Metro-land: broad avenues of interwar semis with deep gardens, ideal for rear and wraparound kitchen extensions, loft conversions with rear dormers, and garage-to-room conversions. Most householder projects here fall squarely within permitted development or a straightforward Ealing Council householder application.

The one sensitivity is the Canalside conservation area on the neighbourhood's north-west flank near the Grand Union, where materials and rear massing get closer scrutiny. We prepare drawings that hold the interwar building line and gap-to-boundary rhythm Ealing's officers expect, and flag any canal-edge or former-industrial plot early so ground and drainage issues are designed out.

Proposed floor plan

Greenford UB6

Greenford (UB6) — planning at a glance

Council: London Borough of Ealing
Postcode district: UB6
Planning portal: View the Ealing planning portal
Housing stock: Greenford is dominated by 1920s-30s bay-fronted semis and short terraces laid out along wide suburban avenues, many with generous rear gardens and original hipped roofs. Nearer the Grand Union Canal and the old Rockware/Lyon works, plots give way to former industrial land and later flat-roofed infill.
Article 4: London Borough of Ealing does not publish its Article 4 directions to the national planning register, so permitted development rights in Greenford (UB6) can’t be confirmed from open data alone — we check the direction schedule with the council before recommending a route, as part of the fixed fee. No published householder Article 4 in Greenford; the main control is the canalside conservation area to the north-west and the industrial fringe along the Grand Union
Conservation: Canalside (north-west part)
Sample streets: Oldfield Lane North · The Fairway · Costons Avenue · Rockware Avenue
Local constraints: Canalside conservation-area control on the north-west edge affecting works visible from the Grand Union corridorInterwar semis where side-return and rear extensions must respect the established building line and gaps between pairsIndustrial and former-works land near the canal carrying potential contamination and drainage considerationsMature street trees on avenues such as The Fairway that may be TPO-protected

Planning in Greenford (UB6): what to know before you apply

No published householder Article 4 direction in Greenford, so most extensions and lofts run under permitted development or a standard Ealing householder application. Properties bordering the Canalside conservation area lose some permitted-development rights, and rear/side extension depths are assessed against the neighbouring semis' building line.

Typical Greenford housing stock

Greenford is dominated by 1920s-30s bay-fronted semis and short terraces laid out along wide suburban avenues, many with generous rear gardens and original hipped roofs. Nearer the Grand Union Canal and the old Rockware/Lyon works, plots give way to former industrial land and later flat-roofed infill.

Streets we regularly draw for in Greenford

Oldfield Lane North · The Fairway · Costons Avenue · Rockware Avenue

What UB6 is actually built of

Measured from 299 classified residential buildings in UB6, not from a description of the area.

Greenford UB6 housing mix

Residential building form across the UB6 postcode district, from 299 classified buildings.

Attached on more than one side	44%
Attached on one side	54%
Detached	2%
Median building footprint	62 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	1.52
Buildings classified	299

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Building Regulations Drawings for Greenford (UB6) homes: the package and the process

A Full Plans submission is a technical argument, not a picture. The sheets carry construction build-ups for floors, walls and roof, insulation values and junction details, drainage runs and invert levels, fire escape routes and protected stairs, ventilation provision and the structural elements that carry it all. Building Control checks each against the Approved Documents before work starts.

We coordinate the structural design with the architectural sheets in-house, so the beam sizes on the calculations are the beam sizes on the sections, and the openings your builder prices are the openings that were approved. Where a detail is unusual, we draw it rather than leave it to be resolved on site.

Construction details follow the existing fabric. Solid brick walls, suspended timber floors and uninsulated roofs each need a different build-up to reach the required performance, and a terrace has party wall junctions to detail that a detached house simply does not.

What do building regulations drawings cover?

A building control package translates the approved design into a buildable, compliant specification.

Construction sections and detailed junctions
Structural drawings and calculations (steel beams, foundations, loadings)
Part L thermal performance and insulation specification
Fire safety — escape routes, protected structure, alarms
Drainage and ventilation layouts

Full Plans or Building Notice — which should I choose?

A Full Plans application has your drawings checked and approved by Building Control before work starts, giving certainty and a document lenders and buyers like to see. A Building Notice lets simpler work start sooner but is inspected as it proceeds, with less up-front certainty. For most London extensions and loft conversions we recommend Full Plans, and prepare the package accordingly. Building regulations are a separate consent from planning permission, and the two are often confused — the explainer on permitted development rights sets out which projects escape a planning application but still need building-regs approval, and Architectural Drawings covers the same building-regs package where you want a chartered practice to carry it through to sign-off.

Why coordinate structural calculations in-house?

When the same team draws the building and calculates its structure, the steel schedule matches the drawings and the builder never waits on a missing detail. It removes the classic gap between an architect's drawings and a separately-appointed engineer's calculations.

Full Plans vs Building Notice for a London project
Factor	Full Plans	Building Notice
Drawings checked before work starts	Yes	No
Up-front certainty	High — approval in writing	Lower — inspected as built
Best for	Extensions, lofts, structural work	Minor, simple works
Evidence for lenders and buyers	Full approval record	Completion certificate only
Risk of costly on-site rework	Low	Higher if issues are found late

Sheet from a building regulations drawings package drawn for a Greenford property in UB6, showing the existing and proposed arrangement at scale — A sheet from the building regulations drawings package we submit to London Borough of Ealing for Greenford (UB6) properties.

Also in Greenford UB6

Planning Permission Planning Drawings Architectural Drawings Loft Conversion Drawings House Extension Drawings Building Regulations Drawings across Ealing Building Regulations Drawings across London

FAQ

Building Regulations Drawings in Greenford UB6 — FAQs

Do I need building regulations approval as well as planning permission?+

Almost always, yes. Planning permission covers what the building looks like; building regulations cover how safely it is built. Most extensions and loft conversions need both.

How long does Building Control approval take?+

A Full Plans application is typically assessed within about five weeks. We prepare a complete package and respond to any conditions promptly, so approval is not held up by missing detail.

Can building regulations drawings be done after planning approval?+

Yes. Many homeowners secure planning permission first, then commission the building regulations package before starting on site. We can pick a project up at either stage.

Are structural calculations included?+

Yes — we produce structural drawings and calculations in-house as part of the building regulations package, so your builder has everything to price and build.

Can you submit to Building Control for me?+

Yes, we prepare and submit the Full Plans package and respond to any Building Control queries.

Do I need planning permission for a rear extension in Ealing?+

Many Ealing semis and terraces keep permitted development rights for a single-storey rear extension, so a full application isn't always needed. But the borough-wide Article 4 direction on HMO conversions, and conservation areas such as Bedford Park and Pitshanger, remove or restrict those rights in places. We check your address against the designations first and, where it qualifies, confirm permitted development with a Lawful Development Certificate.

What extra control applies in Bedford Park?+

Bedford Park is one of West London's most tightly controlled conservation areas, with detailed control over materials, rooflines, windows and front elevations. A standard permitted-development dormer or cladding change usually won't apply; instead we design to the area's Arts-and-Crafts character and prepare a full householder application with the elevations and materials the council expects — the reliable route to approval there.

How long does Ealing Council take to decide a householder application?+

Ealing determines most householder applications within the statutory eight-week period once they are validated. The commonest cause of delay is a validation query over missing or inconsistent drawings, so we prepare Ealing submissions to the council's validation checklist — correctly scaled existing and proposed plans, elevations and a location plan — to avoid that back-and-forth.

Can you help with a loft conversion on a 1930s Ealing semi?+

Yes. Ealing's Metro-land semis in Perivale, Greenford and Northolt suit hip-to-gable and dormer loft conversions, which frequently qualify as permitted development on semi-detached homes within the volume limits. We confirm eligibility against those limits and any Article 4 or conservation constraint, then produce the planning and building-regulations drawings.

How much do planning drawings cost in Ealing?+

We work to a fixed fee agreed before we start, typically around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Ealing grants approval. The exact figure depends on the project — a single-storey rear extension differs from a double-storey or a loft — so we quote once we understand your scheme rather than on an open-ended hourly basis.

Free Fixed Quote

Get your free Greenford planning assessment

Tell us your Greenford (UB6) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.