MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportBasement Conversion Drawings in Parsons Green SW6

Side-return kitchen extension in a Victorian Parsons Green terrace in SW6, London Borough of Hammersmith and Fulham
Parsons Green · SW6 · Hammersmith & Fulham

Basement Conversion Drawings in Parsons Green SW6

Fixed-fee, MCIAT-chartered basement conversion drawings for Parsons Green (SW6) homeowners — London Borough of Hammersmith & Fulham validation and local constraints handled from the start.

Free Parsons Green planning assessment

Tell us your Parsons Green (SW6) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Parsons Green (SW6) is one of Fulham's premium Victorian pockets, a district of handsome terraces around the green and the ornamental 'Lion Houses' of the Peterborough Estate, in the London Borough of Hammersmith & Fulham. The demand here is for deep side-return and full-width rear kitchen extensions and loft conversions that add space without compromising a valuable period house.

Conservation control is strong: the Parson's Green area covers the green and its streets, with the Hurlingham, Central Fulham and Walham Green areas across the wider setting, so frontages and rooflines are closely assessed. On the Lion Houses and other detailed terraces, extension design is judged against neighbours and the established pattern, so we check the conservation boundary and the terrace rhythm before drawing to Hammersmith & Fulham's residential guidance.

Side-return kitchen extension in a Victorian Parsons Green terrace in SW6, London Borough of Hammersmith and Fulham
Isometric illustration of a Parsons Green SW6 home basement conversion drawings design
Proposed floor plan
Parsons Green SW6

Planning in Parsons Green (SW6): what to know before you apply

SW6 Parsons Green has no published householder Article 4 direction, but the Parson's Green, Hurlingham, Central Fulham and Walham Green conservation areas cover the green and much of the surrounding grid, where frontages and rooflines are tightly controlled. On the Peterborough Estate's ornamental Lion Houses and the wider high-value terraces, side-return and rear extension depth and roof alterations are scrutinised against the established local pattern.

Typical Parsons Green housing stock

Premium late-Victorian terraces around the green and across the Peterborough Estate, including the ornamental 'Lion Houses' on Clancarty, Settrington and Beltran Roads — deep two-storey homes with back-addition wings and gardens that support ambitious side-return and full-width rear extensions.

Streets we regularly draw for in Parsons Green

Clancarty Road · Settrington Road · Beltran Road · Sulivan Road

What SW6 is actually built of

Measured from 530 classified residential buildings in SW6, not from a description of the area.

Parsons Green SW6 housing mix

Residential building form across the SW6 postcode district, from 530 classified buildings.

Attached on more than one side85%
Attached on one side13%
Detached2%
Median building footprint72 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate2.7
Buildings classified530

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Basement Conversion Drawings for Parsons Green (SW6) homes: the package and the process

A basement package is led by its section. It has to show the existing structure, the proposed floor level, retained or underpinned walls, the tanking system, and how the finished room achieves head height without undermining what sits above. Structural design and architectural design are drawn together because here they are the same decision.

Habitable basement rooms also need light, ventilation and escape. The drawings set out lightwells and their guarding, mechanical ventilation where natural is not achievable, and an escape route that Building Control will accept — usually a protected stair, sometimes an external route out of the lightwell.

What sits below the house decides the route. An existing cellar under a Victorian terrace is a conversion with a known volume, while a house with no cellar is a dig-out with underpinning, structural design and a very different drawing set — and the two are rarely interchangeable.

Do I need planning permission for a basement conversion in London?

An internal conversion of an existing cellar — new floor, insulation, a habitable layout — often does not need planning permission, because the works sit entirely within the existing structure and do not change its external appearance. Digging out a new basement, lowering an existing floor to gain headroom, or enlarging the footprint under a garden usually does, particularly where excavation extends beyond the existing building line. Any external alteration needed to serve the basement — a front light well, a sunken external staircase, or altering the pavement or front garden — is also likely to need planning permission in its own right, even when the basement works themselves would not. In a conservation area, a front light well tends to draw closer scrutiny than the same feature elsewhere, since it changes the street-facing elevation and the pavement it sits within — one more reason we assess the whole scheme, not just the room below ground, before recommending a route.

Cellar conversion or new dig-out — which route fits your property?

The two starting points lead to very different drawing sets. A cellar conversion works with a void that already exists: the drawings focus on damp-proofing, insulation, headroom, natural or borrowed light, means of escape and a compliant layout, coordinated with building regulations rather than planning.

A new dig-out or floor-lowering project starts from a structural decision — how the existing foundations will be underpinned to allow excavation beneath them — and the drawings and structural calculations are produced together from the outset, since the sequence of underpinning, temporary works and waterproofing has to be engineered before a builder can safely start.

What structural design does underpinning a basement need?

Lowering a floor or digging a new basement beneath an existing house means underpinning its foundations in sequenced sections, so the building above stays supported throughout. We produce the structural drawings and calculations for the underpinning sequence, any new steel beams or retaining walls, and the interaction with neighbouring foundations, in-house as part of the same package — so your structural engineer sign-off and your architectural drawings are never out of step with each other.

The sequencing matters as much as the sizing: underpinning is dug and cast in short, alternating sections so the existing wall is never left unsupported over any significant length, and the drawings set out the order those sections are worked in alongside the retaining and waterproofing detail. Getting that sequence wrong is one of the most common causes of cracking and delay on a basement project, which is why we treat it as a design decision rather than something left for the contractor to work out on site.

Basement conversion drawing packages in London
RouteTypical scopePlanning positionFee from
Existing cellar conversionFit-out of an existing void, no excavationUsually building regulations only£2,400
Floor lowering / partial dig-outIncreases headroom within the existing footprintOften needs planning permission£3,200
New-build basement or light well extensionNew basement area beyond the existing footprintFull planning plus Party Wall Act£3,850
Sheet from a basement conversion drawings package drawn for a Parsons Green property in SW6, showing the existing and proposed arrangement at scale
A sheet from the basement conversion drawings package we submit to London Borough of Hammersmith & Fulham for Parsons Green (SW6) properties.
FAQ

Basement Conversion Drawings in Parsons Green SW6 — FAQs

How much do basement conversion drawings cost in London?+
Packages start from around £2,400 for converting an existing cellar and rise to around £3,850 for a full planning and structural package covering a new dig-out or floor-lowering project. We agree the fee upfront once we know which route your property needs.
Does a basement conversion need planning permission?+
Converting an existing cellar often does not, since the works are internal. Digging out a new basement, lowering a floor, or adding external features such as a front light well usually does. We check your specific property before recommending a route.
Will I need a party wall agreement for a basement conversion?+
Almost always, if excavation takes place near or below a shared boundary. The Party Wall etc. Act 1996 requires notice to adjoining owners before underpinning or excavation begins, and we identify likely notifiable neighbours from the drawings.
Are structural calculations included in a basement conversion package?+
Yes — underpinning sequences, steel beams and retaining structures are calculated in-house as part of the same fixed fee, so the drawings and the engineering are never produced separately.
Do I need an architect for a basement conversion?+
No. As an MCIAT-chartered architectural technologist practice we produce the same council-accepted drawings as an architect, typically around 30% cheaper, with structural design coordinated in-house rather than outsourced.
Do I need planning permission for a side-return extension in Hammersmith & Fulham?+
On the Victorian and Edwardian terraces of Fulham and Shepherd's Bush a single-storey side-return or rear extension can fall within permitted development, so a full application isn't always required. Conservation areas across Fulham, Brackenbury and Ravenscourt Park, and the Peterborough Estate, restrict this. We check your street's designation first and can confirm permitted development with a Lawful Development Certificate.
Will I need a Basement Impact Assessment for a basement in Hammersmith & Fulham?+
Likely, yes. The council applies a basement policy requiring a basement impact assessment for below-ground works, covering structural stability, drainage and groundwater. Basement extensions are common on these terraces, so if you are considering one we flag the requirement early and coordinate the structural input so the application is complete when submitted.
What is special about the Peterborough Estate 'Lion houses'?+
The Peterborough Estate's distinctive red-brick 'Lion houses' carry strong conservation control over their external character, so alterations are expected to respect the estate's materials and detailing. We design to that character and prepare a full householder application where permitted development doesn't apply, which is the reliable route to approval there.
How long does Hammersmith & Fulham take to decide?+
The council determines most householder applications within the statutory eight-week period once validated; basement and conservation cases can involve additional consultation. Because the terraces are party-wall-sensitive, we prepare submissions to the borough's residential extension and basement guidance to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Hammersmith & Fulham?+
We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until the council approves. A side-return, a loft and a basement differ in complexity, so we quote once we have seen your address and project rather than by the hour.
Free Fixed Quote

Get your free Parsons Green planning assessment

Tell us your Parsons Green (SW6) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.