New-build and estate housing in the White City regeneration area W12, London Borough of Hammersmith and Fulham

White City · W12 · Hammersmith & Fulham

Architectural Drawings in White City W12

Fixed-fee, MCIAT-chartered architectural drawings for White City (W12) homeowners — London Borough of Hammersmith & Fulham validation and local constraints handled from the start.

White City (W12) is one of west London's most contrasting districts — the planned interwar Old Oak & Wormholt cottage estate on one side, the vast regeneration of the former BBC and Westfield lands on the other, all in the London Borough of Hammersmith & Fulham. Projects here range from careful roof and rear extensions on the cottage-estate terraces to alterations and fit-outs in the new and converted flats.

The Old Oak & Wormholt conservation area protects the consistent interwar terraces, where roof and frontage changes are sensitive, while the Wood Lane frontage and the White City regeneration framework set the tone for the redevelopment lands. Because so much of the housing is leasehold, alterations often need freeholder consent and party-wall agreement alongside planning, so we establish the property type and any conservation boundary before drawing to Hammersmith & Fulham's guidance.

Proposed floor plan

White City W12

White City (W12) — planning at a glance

Council: London Borough of Hammersmith & Fulham
Postcode district: W12
Planning portal: View the Hammersmith & Fulham planning portal
Housing stock: A district of contrasts — the interwar Old Oak & Wormholt cottage estate and surrounding council-built housing set against the large-scale regeneration of the former BBC and Westfield lands, so the stock spans modest cottage terraces and a growing number of new-build and converted flats.
Article 4: London Borough of Hammersmith & Fulham does not publish its Article 4 directions to the national planning register, so permitted development rights in White City (W12) can’t be confirmed from open data alone — we check the direction schedule with the council before recommending a route, as part of the fixed fee. No householder Article 4 direction is published for W12 White City — the Old Oak & Wormholt and Wood Lane conservation areas, alongside the major regeneration framework, are the defining local controls.
Conservation: Old Oak & WormholtWood LaneShepherds Bush
Sample streets: Bloemfontein Road · Frithville Gardens · Macfarlane Road · Pennard Road
Local constraints: Old Oak & Wormholt conservation area protecting the planned interwar cottage estate, whose consistent terraces are sensitive to roof and frontage alterationWood Lane frontage and the White City regeneration framework shaping expectations for scale and design on the redevelopment landsMix of estate housing and modern leasehold flats, where alterations bring freeholder consent and party-wall considerations distinct from planningShepherds Bush conservation area bleeding in to the south across the W12 boundary

Planning in White City (W12): what to know before you apply

W12 White City has no published householder Article 4 direction, but the Old Oak & Wormholt conservation area protects the interwar cottage estate, where roof and frontage changes are controlled, and the Wood Lane regeneration framework governs the redevelopment lands. Flats and estate housing do not carry the permitted development rights of houses, so much of the alteration work here is assessed as full planning alongside freeholder consent.

Typical White City housing stock

A district of contrasts — the interwar Old Oak & Wormholt cottage estate and surrounding council-built housing set against the large-scale regeneration of the former BBC and Westfield lands, so the stock spans modest cottage terraces and a growing number of new-build and converted flats.

Streets we regularly draw for in White City

Bloemfontein Road · Frithville Gardens · Macfarlane Road · Pennard Road

What W12 is actually built of

Measured from 246 classified residential buildings in W12, not from a description of the area.

White City W12 housing mix

Residential building form across the W12 postcode district, from 246 classified buildings.

Attached on more than one side	65%
Attached on one side	32%
Detached	3%
Median building footprint	64 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	2.68
Buildings classified	246

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Architectural Drawings for White City (W12) homes: the package and the process

The full architectural package has to serve three audiences that want different things from the same building. Planning officers want context, massing and materials; Building Control wants construction, insulation and fire strategy; your builder wants dimensions precise enough to price and set out from. One coordinated model behind all three keeps them agreeing with each other.

That coordination is the part clients notice later. When the planning set and the construction set are drawn from separate sources, the discrepancies surface on site — a beam that will not fit the approved roof line, a window head that has moved. We issue numbered, revision-controlled sheets so everyone is building from the same version.

Building form also sets how much design work there is to do. A detached house can usually take an addition on its own terms, while a terrace has to negotiate two party walls, a shared roof line and a neighbour's windows — the same brief, several times the coordination.

What do architectural drawings include?

A complete architectural package carries your project from idea to buildable detail, so builders quote accurately and councils and Building Control approve confidently.

Concept and feasibility sketches
Planning drawings for the local authority
Building regulations drawings with construction detail
Structural drawings and calculations
Schedules, specifications and material annotations

Architect or architectural technologist — which do I need in London?

For residential planning and building regulations work, an MCIAT-chartered technologist produces the same council-accepted drawings with the same professional accountability as an architect, typically at a lower fee. Councils do not score applications by the author's job title — they score the drawings. The table below compares the two on the factors homeowners actually care about.

What are the stages of an architectural drawing package?

A full architectural package moves through clear stages, each producing drawings you own and can act on. You can stop at any stage — many homeowners take a project to planning approval first, then commission the technical package once they are ready to build.

Concept and feasibility

Sketch options that test what your budget, plot and borough will allow, so you commit to a direction before detailed drawing begins.

Planning drawings

The scaled existing and proposed set your council assesses — floor plans, elevations, sections and site plans formatted to the borough's validation checklist.

Building regulations drawings

The construction-level package: sections, junction details, structural calculations and thermal and fire specification for Building Control.

Construction detail

The final layer of detail and schedules your builder prices and works from on site.

Chartered architectural technologist vs traditional architect for a London home project
Factor	Architectural Technologist	Architect
Council-accepted drawings	Yes	Yes
Typical fee	~30% lower	Higher
Structural coordination	In-house	Often outsourced
Typical drawing turnaround	~7 days	Several weeks
Best for	Extensions, lofts, conversions	Bespoke new-build design

Sheet from a architectural drawings package drawn for a White City property in W12, showing the existing and proposed arrangement at scale — A sheet from the architectural drawings package we submit to London Borough of Hammersmith & Fulham for White City (W12) properties.

Also in White City W12

Planning Permission Planning Drawings Building Regulations Drawings Loft Conversion Drawings House Extension Drawings Architectural Drawings across Hammersmith & Fulham Architectural Drawings across London

FAQ

Architectural Drawings in White City W12 — FAQs

Are architectural drawings the same as planning drawings?+

Planning drawings are a subset of the architectural package — the drawings used specifically for a planning application. The architectural drawings also include building regulations and construction detail.

Will a technologist's drawings be accepted by my council?+

Yes. MCIAT-chartered technologists are a recognised professional body and their drawings are routinely accepted and approved by every London borough.

Can you take my project all the way to construction?+

Yes — from feasibility through planning, building regulations and structural detail, to a set your builder can price and build from.

Do I own the architectural drawings you produce?+

Yes. The drawings are yours to use, and any competent builder can price and build from them — you are never locked into a single contractor by the drawing package.

Can I commission just the planning stage for now?+

Yes. Many homeowners take a project to planning approval first and add the building regulations and construction package later. We stage the fee to match, so you only pay for the stage you need.

Do I need planning permission for a side-return extension in Hammersmith & Fulham?+

On the Victorian and Edwardian terraces of Fulham and Shepherd's Bush a single-storey side-return or rear extension can fall within permitted development, so a full application isn't always required. Conservation areas across Fulham, Brackenbury and Ravenscourt Park, and the Peterborough Estate, restrict this. We check your street's designation first and can confirm permitted development with a Lawful Development Certificate.

Will I need a Basement Impact Assessment for a basement in Hammersmith & Fulham?+

Likely, yes. The council applies a basement policy requiring a basement impact assessment for below-ground works, covering structural stability, drainage and groundwater. Basement extensions are common on these terraces, so if you are considering one we flag the requirement early and coordinate the structural input so the application is complete when submitted.

What is special about the Peterborough Estate 'Lion houses'?+

The Peterborough Estate's distinctive red-brick 'Lion houses' carry strong conservation control over their external character, so alterations are expected to respect the estate's materials and detailing. We design to that character and prepare a full householder application where permitted development doesn't apply, which is the reliable route to approval there.

How long does Hammersmith & Fulham take to decide?+

The council determines most householder applications within the statutory eight-week period once validated; basement and conservation cases can involve additional consultation. Because the terraces are party-wall-sensitive, we prepare submissions to the borough's residential extension and basement guidance to avoid the drawing queries that cause most delays.

How much do planning drawings cost in Hammersmith & Fulham?+

We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until the council approves. A side-return, a loft and a basement differ in complexity, so we quote once we have seen your address and project rather than by the hour.

Free Fixed Quote

Get your free White City planning assessment

Tell us your White City (W12) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.