Garage conversion and driveway on an interwar semi in Raynes Park SW20, London Borough of Merton

Raynes Park · SW20 · Merton

Architectural Drawings in Raynes Park SW20

Fixed-fee, MCIAT-chartered architectural drawings for Raynes Park (SW20) homeowners — London Borough of Merton validation and local constraints handled from the start.

Raynes Park (SW20) in Merton is a predominantly Edwardian and interwar suburb, running from the terraces around the station and Grand Drive to the semi-detached streets of West Wimbledon and Cottenham Park. The consistent interwar housing means side and rear additions and loft conversions follow a well-established pattern, and Merton's expectations for that house type are clearly documented.

The Wimbledon West conservation area toward Cottenham Park is the main designated control, governing frontages and roof changes for the houses inside its boundary. We confirm where a Raynes Park property sits relative to that boundary, and check for protected street trees, before recommending a permitted-development or full-application route and drawing to Merton's residential guidance.

Proposed floor plan

Raynes Park SW20

Raynes Park (SW20) — planning at a glance

Council: London Borough of Merton
Postcode district: SW20
Planning portal: View the Merton planning portal
Housing stock: Edwardian terraces around Raynes Park station and the Grand Drive streets, interwar semi-detached houses across West Wimbledon and Cottenham Park, and 1930s shopping parades along the main roads.
Article 4: London Borough of Merton does not publish its Article 4 directions to the national planning register, so permitted development rights in Raynes Park (SW20) can’t be confirmed from open data alone — we check the direction schedule with the council before recommending a route, as part of the fixed fee. The Wimbledon West conservation area toward Cottenham Park and the consistent interwar semi grain are the main controls.
Conservation: Wimbledon West
Sample streets: Coombe Lane · Grand Drive · Worple Road · Approach Road
Local constraints: Wimbledon West conservation area toward Cottenham Park, controlling frontages and roof changesA consistent interwar semi-detached grain where the pattern of two-storey side and rear additions is well establishedSuburban street-tree cover carrying Tree Preservation Orders on several roads

Planning in Raynes Park (SW20): what to know before you apply

SW20 has no householder Article 4 direction, so many Raynes Park houses retain permitted development rights for side, rear and loft work — but the Wimbledon West conservation area toward Cottenham Park is the exception, and Tree Preservation Orders apply to street trees on several suburban roads.

Typical Raynes Park housing stock

Edwardian terraces around Raynes Park station and the Grand Drive streets, interwar semi-detached houses across West Wimbledon and Cottenham Park, and 1930s shopping parades along the main roads.

Streets we regularly draw for in Raynes Park

Coombe Lane · Grand Drive · Worple Road · Approach Road

What SW20 is actually built of

Measured from 217 classified residential buildings in SW20, not from a description of the area.

Raynes Park SW20 housing mix

Residential building form across the SW20 postcode district, from 217 classified buildings.

Attached on more than one side	53%
Attached on one side	41%
Detached	6%
Median building footprint	68 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	1.25
Buildings classified	217

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Architectural Drawings for Raynes Park (SW20) homes: the package and the process

The full architectural package has to serve three audiences that want different things from the same building. Planning officers want context, massing and materials; Building Control wants construction, insulation and fire strategy; your builder wants dimensions precise enough to price and set out from. One coordinated model behind all three keeps them agreeing with each other.

That coordination is the part clients notice later. When the planning set and the construction set are drawn from separate sources, the discrepancies surface on site — a beam that will not fit the approved roof line, a window head that has moved. We issue numbered, revision-controlled sheets so everyone is building from the same version.

Building form also sets how much design work there is to do. A detached house can usually take an addition on its own terms, while a terrace has to negotiate two party walls, a shared roof line and a neighbour's windows — the same brief, several times the coordination.

What do architectural drawings include?

A complete architectural package carries your project from idea to buildable detail, so builders quote accurately and councils and Building Control approve confidently.

Concept and feasibility sketches
Planning drawings for the local authority
Building regulations drawings with construction detail
Structural drawings and calculations
Schedules, specifications and material annotations

Architect or architectural technologist — which do I need in London?

For residential planning and building regulations work, an MCIAT-chartered technologist produces the same council-accepted drawings with the same professional accountability as an architect, typically at a lower fee. Councils do not score applications by the author's job title — they score the drawings. The table below compares the two on the factors homeowners actually care about.

What are the stages of an architectural drawing package?

A full architectural package moves through clear stages, each producing drawings you own and can act on. You can stop at any stage — many homeowners take a project to planning approval first, then commission the technical package once they are ready to build.

Concept and feasibility

Sketch options that test what your budget, plot and borough will allow, so you commit to a direction before detailed drawing begins.

Planning drawings

The scaled existing and proposed set your council assesses — floor plans, elevations, sections and site plans formatted to the borough's validation checklist.

Building regulations drawings

The construction-level package: sections, junction details, structural calculations and thermal and fire specification for Building Control.

Construction detail

The final layer of detail and schedules your builder prices and works from on site.

Chartered architectural technologist vs traditional architect for a London home project
Factor	Architectural Technologist	Architect
Council-accepted drawings	Yes	Yes
Typical fee	~30% lower	Higher
Structural coordination	In-house	Often outsourced
Typical drawing turnaround	~7 days	Several weeks
Best for	Extensions, lofts, conversions	Bespoke new-build design

Sheet from a architectural drawings package drawn for a Raynes Park property in SW20, showing the existing and proposed arrangement at scale — A sheet from the architectural drawings package we submit to London Borough of Merton for Raynes Park (SW20) properties.

Also in Raynes Park SW20

Planning Permission Planning Drawings Building Regulations Drawings Loft Conversion Drawings House Extension Drawings Architectural Drawings across Merton Architectural Drawings across London

FAQ

Architectural Drawings in Raynes Park SW20 — FAQs

Are architectural drawings the same as planning drawings?+

Planning drawings are a subset of the architectural package — the drawings used specifically for a planning application. The architectural drawings also include building regulations and construction detail.

Will a technologist's drawings be accepted by my council?+

Yes. MCIAT-chartered technologists are a recognised professional body and their drawings are routinely accepted and approved by every London borough.

Can you take my project all the way to construction?+

Yes — from feasibility through planning, building regulations and structural detail, to a set your builder can price and build from.

Do I own the architectural drawings you produce?+

Yes. The drawings are yours to use, and any competent builder can price and build from them — you are never locked into a single contractor by the drawing package.

Can I commission just the planning stage for now?+

Yes. Many homeowners take a project to planning approval first and add the building regulations and construction package later. We stage the fee to match, so you only pay for the stage you need.

Do I need planning permission for an extension in Merton?+

The interwar semis of Raynes Park and Morden often keep permitted development rights for rear extensions and lofts, so a full application isn't always needed. Conservation areas such as Wimbledon Village, Wimbledon Common and the John Innes estate at Merton Park restrict this. We check your street's designation first and can confirm permitted development with a Lawful Development Certificate.

What is special about building at the John Innes estate in Merton Park?+

The John Innes estate is a planned Arts-and-Crafts conservation area with a distinctive character the council protects closely — materials, proportions and rooflines are all controlled. Permitted development is often restricted there, so we design to the estate's character and prepare a full, context-led application, which is the reliable route to approval.

What do Merton's HMO Article 4 directions affect?+

In designated wards, an Article 4 direction removes permitted development for change of use to an HMO (C3 to C4), so a conversion to a house in multiple occupation needs a full application there. It doesn't affect a standard family extension, but if you are considering an HMO we confirm whether the direction covers your address and use before advising.

How long does Merton Council take to decide?+

Merton determines most householder applications within the statutory eight-week period once validated; Wimbledon and Merton Park conservation cases can involve additional consultation. We prepare submissions to the council's validation checklist to avoid the drawing queries that cause most delays.

How much do planning drawings cost in Merton?+

We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Merton approves. A suburban Raynes Park extension and a Wimbledon Village or Merton Park application differ in the evidence required, so we quote once we understand your address and project rather than by the hour.

Free Fixed Quote

Get your free Raynes Park planning assessment

Tell us your Raynes Park (SW20) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.