Kennington · SE11 · Lambeth

Architectural Drawings in Kennington SE11

Fixed-fee, MCIAT-chartered architectural drawings for Kennington (SE11) homeowners — London Borough of Lambeth validation and local constraints handled from the start.

Kennington SE11 is a tight grid of late-Georgian and early-Victorian terraces a short walk from the Oval, where most homeowners look to rear kitchen extensions and loft conversions to add space without altering the protected street frontage.

Because the Kennington and Walcot Conservation Areas cover much of the outcode, we always confirm which boundary a property sits inside before advising permitted development versus a full householder application — conservation-area status quietly removes several rights a comparable house outside would keep.

Proposed floor plan

Kennington SE11

Kennington (SE11) — planning at a glance

Council: London Borough of Lambeth
Postcode district: SE11
Planning portal: View the Lambeth planning portal
Housing stock: Smart brick terraces that grew from the late 18th century onward, including the Georgian set pieces around Cleaver Square. Many are three- and four-storey flat-fronted houses, now often split into flats or run as family homes with scope for rear and lower-ground extensions.
Article 4: No household Article 4 direction covers Kennington SE11 — Lambeth's HMO Article 4 currently applies only to the Streatham wards, so single-dwelling permitted development survives here except where conservation-area rules narrow it.
Conservation: Kennington Conservation Area (CA08)Walcot Conservation Area
Sample streets: Cleaver Square · Cardigan Street · Courtenay Street · Kennington Road
Local constraints: Kennington Conservation Area controls front elevations, roof lines and materials, so rooflight and dormer choices on loft conversions are scrutinisedCleaver Square and the flat-fronted Georgian terraces mean side and front alterations rarely qualify as permitted developmentWalcot Conservation Area overlaps the northern edge of the outcode, adding a second appraisal boundary to check before design

Planning in Kennington (SE11): what to know before you apply

Most Kennington projects run as full householder applications to Lambeth given the conservation-area coverage, with rear extensions and rooflight lofts the usual approvable route. Front and roof changes need the closest attention. We check the exact CA boundary and any listing before choosing the route.

Typical Kennington housing stock

Smart brick terraces that grew from the late 18th century onward, including the Georgian set pieces around Cleaver Square. Many are three- and four-storey flat-fronted houses, now often split into flats or run as family homes with scope for rear and lower-ground extensions.

Streets we regularly draw for in Kennington

Cleaver Square · Cardigan Street · Courtenay Street · Kennington Road

What SE11 is actually built of

Measured from 291 classified residential buildings in SE11, not from a description of the area.

Kennington SE11 housing mix

Residential building form across the SE11 postcode district, from 291 classified buildings.

Attached on more than one side	73%
Attached on one side	23%
Detached	4%
Median building footprint	59 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	4.87
Buildings classified	291

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Architectural Drawings for Kennington (SE11) homes: the package and the process

The full architectural package has to serve three audiences that want different things from the same building. Planning officers want context, massing and materials; Building Control wants construction, insulation and fire strategy; your builder wants dimensions precise enough to price and set out from. One coordinated model behind all three keeps them agreeing with each other.

That coordination is the part clients notice later. When the planning set and the construction set are drawn from separate sources, the discrepancies surface on site — a beam that will not fit the approved roof line, a window head that has moved. We issue numbered, revision-controlled sheets so everyone is building from the same version.

Building form also sets how much design work there is to do. A detached house can usually take an addition on its own terms, while a terrace has to negotiate two party walls, a shared roof line and a neighbour's windows — the same brief, several times the coordination.

What do architectural drawings include?

A complete architectural package carries your project from idea to buildable detail, so builders quote accurately and councils and Building Control approve confidently.

Concept and feasibility sketches
Planning drawings for the local authority
Building regulations drawings with construction detail
Structural drawings and calculations
Schedules, specifications and material annotations

Architect or architectural technologist — which do I need in London?

For residential planning and building regulations work, an MCIAT-chartered technologist produces the same council-accepted drawings with the same professional accountability as an architect, typically at a lower fee. Councils do not score applications by the author's job title — they score the drawings. The table below compares the two on the factors homeowners actually care about.

What are the stages of an architectural drawing package?

A full architectural package moves through clear stages, each producing drawings you own and can act on. You can stop at any stage — many homeowners take a project to planning approval first, then commission the technical package once they are ready to build.

Concept and feasibility

Sketch options that test what your budget, plot and borough will allow, so you commit to a direction before detailed drawing begins.

Planning drawings

The scaled existing and proposed set your council assesses — floor plans, elevations, sections and site plans formatted to the borough's validation checklist.

Building regulations drawings

The construction-level package: sections, junction details, structural calculations and thermal and fire specification for Building Control.

Construction detail

The final layer of detail and schedules your builder prices and works from on site.

Chartered architectural technologist vs traditional architect for a London home project
Factor	Architectural Technologist	Architect
Council-accepted drawings	Yes	Yes
Typical fee	~30% lower	Higher
Structural coordination	In-house	Often outsourced
Typical drawing turnaround	~7 days	Several weeks
Best for	Extensions, lofts, conversions	Bespoke new-build design

Sheet from a architectural drawings package drawn for a Kennington property in SE11, showing the existing and proposed arrangement at scale — A sheet from the architectural drawings package we submit to London Borough of Lambeth for Kennington (SE11) properties.

Also in Kennington SE11

Planning Permission Planning Drawings Building Regulations Drawings Loft Conversion Drawings House Extension Drawings Architectural Drawings across Lambeth Architectural Drawings across London

FAQ

Architectural Drawings in Kennington SE11 — FAQs

Are architectural drawings the same as planning drawings?+

Planning drawings are a subset of the architectural package — the drawings used specifically for a planning application. The architectural drawings also include building regulations and construction detail.

Will a technologist's drawings be accepted by my council?+

Yes. MCIAT-chartered technologists are a recognised professional body and their drawings are routinely accepted and approved by every London borough.

Can you take my project all the way to construction?+

Yes — from feasibility through planning, building regulations and structural detail, to a set your builder can price and build from.

Do I own the architectural drawings you produce?+

Yes. The drawings are yours to use, and any competent builder can price and build from them — you are never locked into a single contractor by the drawing package.

Can I commission just the planning stage for now?+

Yes. Many homeowners take a project to planning approval first and add the building regulations and construction package later. We stage the fee to match, so you only pay for the stage you need.

Do I need planning permission for a side-return extension in Lambeth?+

On many of Lambeth's Victorian and Edwardian terraces in Brixton, Clapham and Streatham, a single-storey side-return or rear extension can fall within permitted development, so a full application isn't always required. Conservation areas such as Clapham Common and Brixton Water Lane can restrict this. We check your street's designation first and can confirm permitted development with a Lawful Development Certificate.

My Lambeth home is a converted flat — does that change things?+

It often does. Many Lambeth houses are converted flats, so ownership, lease and party-wall considerations can matter as much as the planning route, and the freeholder's agreement is usually needed alongside planning. We resolve the ownership and shared-structure context before drawing so the scheme is deliverable, not just consentable.

What does Lambeth's HMO Article 4 direction affect?+

Lambeth applies an Article 4 direction removing permitted development rights for HMO conversions (C3 to C4) in designated parts of the borough, so a change of use to a house in multiple occupation needs a full application there. It doesn't affect a standard family extension, but we confirm whether it applies to your address and use before advising on a route.

How long does Lambeth Council take to decide?+

Lambeth determines most householder applications within the statutory eight-week period once validated. The terraced grids around Clapham and Brixton are party-wall-sensitive with well-established design expectations, so the commonest delay is a drawing query — we prepare submissions to the borough's residential extension guidance to keep them moving.

How much do planning drawings cost in Lambeth?+

We agree a fixed fee before starting, usually around 30% below an architect's fee for the same council-accepted drawings, with free redraws until Lambeth approves. A side-return, a loft and a flat-conversion scheme differ in complexity, so we quote once we understand your street and project rather than charging by the hour.

Free Fixed Quote

Get your free Kennington planning assessment

Tell us your Kennington (SE11) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.