MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportHouse Extension Drawings in Kenton HA3

Kitchen extension to a 1930s semi-detached house in Kenton HA3, building regulations drawings for Harrow Council
Kenton · HA3 · Harrow

House Extension Drawings in Kenton HA3

Fixed-fee, MCIAT-chartered house extension drawings for Kenton (HA3) homeowners — London Borough of Harrow validation and local constraints handled from the start.

Free Kenton planning assessment

Tell us your Kenton (HA3) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Kenton (HA3) is a 1930s semi-detached suburb straddling the Harrow–Brent border, where the everyday project is a rear kitchen extension, a hip-to-gable or L-shaped dormer loft, or a two-storey side extension that adds a bedroom while keeping the interwar frontage in proportion.

Around the Mount Stewart and Northwick Circle conservation areas we take extra care with roof form, materials and the building line, and we always confirm whether an address falls to Harrow Council so the application is validated first time.

Kitchen extension to a 1930s semi-detached house in Kenton HA3, building regulations drawings for Harrow Council
Isometric illustration of a Kenton HA3 home house extension drawings design
Proposed floor plan
Kenton HA3

Planning in Kenton (HA3): what to know before you apply

No published householder Article 4 direction, though the Mount Stewart and Northwick Circle conservation areas curb some permitted-development rights; the main watch-points are matching the semi-detached roofline and confirming the correct authority near the Harrow/Brent boundary.

Typical Kenton housing stock

Interwar semi-detached and short terraced houses laid out as a 1930s suburb straddling the Harrow and Brent border, typically with bay windows, hipped roofs and off-street parking. Plots are regular with modest-to-generous rear gardens well suited to single-storey additions.

Streets we regularly draw for in Kenton

The Ridgeway · Draycott Avenue · Windermere Avenue · Northwick Circle

What HA3 is actually built of

Measured from 245 classified residential buildings in HA3, not from a description of the area.

Kenton HA3 housing mix

Residential building form across the HA3 postcode district, from 245 classified buildings.

Attached on more than one side41%
Attached on one side51%
Detached9%
Median building footprint72 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate1.18
Buildings classified245

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

House Extension Drawings for Kenton (HA3) homes: the package and the process

Extension drawings are read for their dimensions. The proposed plan needs depth measured from the original rear wall — not from a previous extension — eaves and ridge heights taken from existing ground level, and the distance to each boundary marked. A site plan showing how much garden remains is what an officer reaches for when the amenity question comes up.

We draw the existing building accurately first, because everything else is measured from it. Where the original footprint has already been added to, that history goes on the drawing: it decides which allowances are still available and it is the first thing an officer checks against the council's own records.

The plot decides the extension type long before taste does. A mid-terrace has depth to work with and an alley if it is lucky; a semi has one clear flank; a detached house can go wide. Reading the building form first is what stops a design being drawn that the plot cannot take.

Which extension types do you draw?

Every London extension is shaped by the plot, the neighbours and the borough's design guidance. We draw them all.

Rear extension

A single-storey rear extension is often permitted development within depth limits — ideal for an open-plan kitchen-diner.

Side-return

Fills the alley beside a Victorian terrace, widening the ground floor without losing garden.

Wraparound

Combines a rear and side-return extension for a transformative ground floor, usually needing planning permission.

Double-storey

Adds space above and below, subject to tighter scale and neighbour-impact scrutiny.

Basement

Creates space downward where footprint is limited, with structural and party-wall care.

Do I need planning permission for a house extension in London?

Single-storey rear extensions within permitted development limits (up to 6m for terraced/semi-detached homes under the larger-home scheme, subject to neighbour consultation) may not need a full application. Wraparounds, double-storeys and anything in a conservation area usually do. We assess your plot and recommend the right route before drawing. The current depth, height and eaves limits are set out in full in the guide to planning permission for a rear extension, and where you would rather one practice ran the design, the application and the building-regulations stage together, Architectural Drawings covers that full scope.

How do you maximise the footprint the council will approve?

We know each borough's depth, height and daylight standards, so we design to the edge of what will be approved rather than guessing — and we check the 45-degree neighbour daylight rule and any rear building line before submission. Where a plot is tight we test a permitted-development scheme against a slightly larger householder application and show you the trade-off in space, cost and timescale, so the drawn scheme is the one that actually maximises value rather than just floor area.

Typical London extension drawing packages
ExtensionTypical routePackageFee from
Single-storey rearPermitted development / householderPlanning + building regs£1,100
Side-returnHouseholder planningPlanning + building regs + structural£1,600
WraparoundHouseholder planningFull package + structural£2,200
Double-storeyHouseholder planningFull package + structural£2,400
Sheet from a house extension drawings package drawn for a Kenton property in HA3, showing the existing and proposed arrangement at scale
A sheet from the house extension drawings package we submit to London Borough of Harrow for Kenton (HA3) properties.
FAQ

House Extension Drawings in Kenton HA3 — FAQs

How far can I extend without planning permission in London?+
Under permitted development, single-storey rear extensions can reach 3m (terraced/semi) or 4m (detached), or up to 6–8m under the prior-approval larger-home scheme — but conservation areas and Article 4 directions can remove these rights. We check your property first.
Do extension drawings include structural calculations?+
Our full package includes structural drawings and calculations coordinated in-house, so your builder can price and build without waiting on an engineer.
How long do extension drawings take?+
Typically about 7 days from survey to a full drawing set delivered to your online portal.
Will my rear extension need a party wall agreement?+
If you build up to or on a shared boundary, excavate near a neighbour's foundations, or cut into a party wall for a steel, the Party Wall etc. Act 1996 usually applies. Our drawings show the works clearly so a party wall surveyor — or your neighbour — can see exactly what is proposed, which keeps that process quick.
Can I extend a house in a conservation area?+
Yes, but conservation areas and Article 4 directions commonly remove permitted development for rear and side extensions, so the work needs a full householder application designed to the council's heritage guidance. We confirm your property's designation before recommending a route.
Do I need planning permission for a loft conversion in Harrow?+
Harrow's Metro-land semis and detached houses in Rayners Lane, Kenton and Stanmore suit hip-to-gable and dormer lofts, which frequently qualify as permitted development within the volume limits. The exceptions are the conservation areas — Harrow on the Hill and Pinner's historic core — and the Article 4 wards. We check your address and can confirm permitted development with a Lawful Development Certificate.
What does Harrow expect for a rear extension on a 1930s semi?+
The council pays close attention to preserving the rhythm and building line of its interwar suburban streets, so extensions are expected to respect the established line and roof form. Many single-storey rear extensions still fall within permitted development; where a full application is needed, we design to the borough's residential guidance so it validates and approves without repeated revisions.
Can I extend a home in Harrow on the Hill or Pinner?+
Yes, but these historic conservation areas carry a heritage setting and long views the council protects closely, so permitted development is often restricted and a full, context-led application is required. We design to the character of the area — materials, proportions and rooflines — and evidence the heritage considerations so the submission stands up.
How long does Harrow Council take to decide?+
Harrow determines most householder applications within the statutory eight-week period once validated. The commonest delay is a validation query, so we prepare Harrow submissions to the council's checklist with correctly scaled existing and proposed drawings and a location plan to keep the application on track.
How much do planning drawings cost in Harrow?+
We work to a fixed fee agreed upfront, usually around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Harrow approves. The figure depends on the scheme — a dormer loft differs from a double-storey extension — so we confirm it once we understand your project rather than billing by the hour.
Free Fixed Quote

Get your free Kenton planning assessment

Tell us your Kenton (HA3) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.