Kitchen extension to a 1930s semi-detached house in Kenton HA3, building regulations drawings for Harrow Council

Kenton · HA3 · Harrow

Architectural Drawings in Kenton HA3

Fixed-fee, MCIAT-chartered architectural drawings for Kenton (HA3) homeowners — London Borough of Harrow validation and local constraints handled from the start.

Kenton (HA3) is a 1930s semi-detached suburb straddling the Harrow–Brent border, where the everyday project is a rear kitchen extension, a hip-to-gable or L-shaped dormer loft, or a two-storey side extension that adds a bedroom while keeping the interwar frontage in proportion.

Around the Mount Stewart and Northwick Circle conservation areas we take extra care with roof form, materials and the building line, and we always confirm whether an address falls to Harrow Council so the application is validated first time.

Proposed floor plan

Kenton HA3

Kenton (HA3) — planning at a glance

Council: London Borough of Harrow
Postcode district: HA3
Planning portal: View the Harrow planning portal
Housing stock: Interwar semi-detached and short terraced houses laid out as a 1930s suburb straddling the Harrow and Brent border, typically with bay windows, hipped roofs and off-street parking. Plots are regular with modest-to-generous rear gardens well suited to single-storey additions.
Article 4: London Borough of Harrow does not publish its Article 4 directions to the national planning register, so permitted development rights in Kenton (HA3) can’t be confirmed from open data alone — we check the direction schedule with the council before recommending a route, as part of the fixed fee. Interwar suburban character straddling the Harrow/Brent boundary — consistent semi-detached frontages guide the scale of additions.
Conservation: Mount StewartNorthwick Circle
Sample streets: The Ridgeway · Draycott Avenue · Windermere Avenue · Northwick Circle
Local constraints: The Mount Stewart and Northwick Circle conservation areas protect pockets of planned interwar layout and consistent frontagesSemi-detached pairs mean party-wall and roofline matching are key considerations for side and loft extensionsNeighbour amenity and rear-garden depth govern how far single-storey extensions can projectThe Harrow/Brent borough boundary runs nearby, so confirming the correct planning authority for each address matters

Planning in Kenton (HA3): what to know before you apply

No published householder Article 4 direction, though the Mount Stewart and Northwick Circle conservation areas curb some permitted-development rights; the main watch-points are matching the semi-detached roofline and confirming the correct authority near the Harrow/Brent boundary.

Typical Kenton housing stock

Interwar semi-detached and short terraced houses laid out as a 1930s suburb straddling the Harrow and Brent border, typically with bay windows, hipped roofs and off-street parking. Plots are regular with modest-to-generous rear gardens well suited to single-storey additions.

Streets we regularly draw for in Kenton

The Ridgeway · Draycott Avenue · Windermere Avenue · Northwick Circle

What HA3 is actually built of

Measured from 245 classified residential buildings in HA3, not from a description of the area.

Kenton HA3 housing mix

Residential building form across the HA3 postcode district, from 245 classified buildings.

Attached on more than one side	41%
Attached on one side	51%
Detached	9%
Median building footprint	72 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	1.18
Buildings classified	245

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Architectural Drawings for Kenton (HA3) homes: the package and the process

The full architectural package has to serve three audiences that want different things from the same building. Planning officers want context, massing and materials; Building Control wants construction, insulation and fire strategy; your builder wants dimensions precise enough to price and set out from. One coordinated model behind all three keeps them agreeing with each other.

That coordination is the part clients notice later. When the planning set and the construction set are drawn from separate sources, the discrepancies surface on site — a beam that will not fit the approved roof line, a window head that has moved. We issue numbered, revision-controlled sheets so everyone is building from the same version.

Building form also sets how much design work there is to do. A detached house can usually take an addition on its own terms, while a terrace has to negotiate two party walls, a shared roof line and a neighbour's windows — the same brief, several times the coordination.

What do architectural drawings include?

A complete architectural package carries your project from idea to buildable detail, so builders quote accurately and councils and Building Control approve confidently.

Concept and feasibility sketches
Planning drawings for the local authority
Building regulations drawings with construction detail
Structural drawings and calculations
Schedules, specifications and material annotations

Architect or architectural technologist — which do I need in London?

For residential planning and building regulations work, an MCIAT-chartered technologist produces the same council-accepted drawings with the same professional accountability as an architect, typically at a lower fee. Councils do not score applications by the author's job title — they score the drawings. The table below compares the two on the factors homeowners actually care about.

What are the stages of an architectural drawing package?

A full architectural package moves through clear stages, each producing drawings you own and can act on. You can stop at any stage — many homeowners take a project to planning approval first, then commission the technical package once they are ready to build.

Concept and feasibility

Sketch options that test what your budget, plot and borough will allow, so you commit to a direction before detailed drawing begins.

Planning drawings

The scaled existing and proposed set your council assesses — floor plans, elevations, sections and site plans formatted to the borough's validation checklist.

Building regulations drawings

The construction-level package: sections, junction details, structural calculations and thermal and fire specification for Building Control.

Construction detail

The final layer of detail and schedules your builder prices and works from on site.

Chartered architectural technologist vs traditional architect for a London home project
Factor	Architectural Technologist	Architect
Council-accepted drawings	Yes	Yes
Typical fee	~30% lower	Higher
Structural coordination	In-house	Often outsourced
Typical drawing turnaround	~7 days	Several weeks
Best for	Extensions, lofts, conversions	Bespoke new-build design

Sheet from a architectural drawings package drawn for a Kenton property in HA3, showing the existing and proposed arrangement at scale — A sheet from the architectural drawings package we submit to London Borough of Harrow for Kenton (HA3) properties.

Also in Kenton HA3

Planning Permission Planning Drawings Building Regulations Drawings Loft Conversion Drawings House Extension Drawings Architectural Drawings across Harrow Architectural Drawings across London

FAQ

Architectural Drawings in Kenton HA3 — FAQs

Are architectural drawings the same as planning drawings?+

Planning drawings are a subset of the architectural package — the drawings used specifically for a planning application. The architectural drawings also include building regulations and construction detail.

Will a technologist's drawings be accepted by my council?+

Yes. MCIAT-chartered technologists are a recognised professional body and their drawings are routinely accepted and approved by every London borough.

Can you take my project all the way to construction?+

Yes — from feasibility through planning, building regulations and structural detail, to a set your builder can price and build from.

Do I own the architectural drawings you produce?+

Yes. The drawings are yours to use, and any competent builder can price and build from them — you are never locked into a single contractor by the drawing package.

Can I commission just the planning stage for now?+

Yes. Many homeowners take a project to planning approval first and add the building regulations and construction package later. We stage the fee to match, so you only pay for the stage you need.

Do I need planning permission for a loft conversion in Harrow?+

Harrow's Metro-land semis and detached houses in Rayners Lane, Kenton and Stanmore suit hip-to-gable and dormer lofts, which frequently qualify as permitted development within the volume limits. The exceptions are the conservation areas — Harrow on the Hill and Pinner's historic core — and the Article 4 wards. We check your address and can confirm permitted development with a Lawful Development Certificate.

What does Harrow expect for a rear extension on a 1930s semi?+

The council pays close attention to preserving the rhythm and building line of its interwar suburban streets, so extensions are expected to respect the established line and roof form. Many single-storey rear extensions still fall within permitted development; where a full application is needed, we design to the borough's residential guidance so it validates and approves without repeated revisions.

Can I extend a home in Harrow on the Hill or Pinner?+

Yes, but these historic conservation areas carry a heritage setting and long views the council protects closely, so permitted development is often restricted and a full, context-led application is required. We design to the character of the area — materials, proportions and rooflines — and evidence the heritage considerations so the submission stands up.

How long does Harrow Council take to decide?+

Harrow determines most householder applications within the statutory eight-week period once validated. The commonest delay is a validation query, so we prepare Harrow submissions to the council's checklist with correctly scaled existing and proposed drawings and a location plan to keep the application on track.

How much do planning drawings cost in Harrow?+

We work to a fixed fee agreed upfront, usually around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Harrow approves. The figure depends on the scheme — a dormer loft differs from a double-storey extension — so we confirm it once we understand your project rather than billing by the hour.

Free Fixed Quote

Get your free Kenton planning assessment

Tell us your Kenton (HA3) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.