MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportHouse Extension Drawings in Hammersmith W6

Side-return extension drawings for a Victorian terrace in Hammersmith W6, London Borough of Hammersmith and Fulham
Hammersmith · W6 · Hammersmith & Fulham

House Extension Drawings in Hammersmith W6

Fixed-fee, MCIAT-chartered house extension drawings for Hammersmith (W6) homeowners — London Borough of Hammersmith & Fulham validation and local constraints handled from the start.

Free Hammersmith planning assessment

Tell us your Hammersmith (W6) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Hammersmith (W6) runs from the tight Victorian grid of Brackenbury Village up to the larger houses around Brook Green, and side-return and loft projects are the staple here. The Bradmore conservation area covers most of Brackenbury's streets, so what reads as a routine extension a few roads away is a conservation-area application within its boundary.

Brook Green adds a second, distinct context of larger period houses and stucco frontages under their own conservation-area control. We check which grid a Hammersmith property sits in — and where its boundary falls — before recommending a route, and prepare the drawings to the borough's design and validation standards.

Side-return extension drawings for a Victorian terrace in Hammersmith W6, London Borough of Hammersmith and Fulham
Isometric illustration of a Hammersmith W6 home house extension drawings design
Proposed floor plan
Hammersmith W6

Planning in Hammersmith (W6): what to know before you apply

W6 sits across the Bradmore and Brook Green conservation areas, which cover much of the residential grid and remove permitted development rights on many streets, so extensions and loft conversions are assessed against the borough's conservation guidance. London Borough of Hammersmith and Fulham does not publish an Article 4 schedule to the national open-data register, so an empty entry there is not evidence of absence — we confirm the current directions and conservation boundary with the council before advising.

Typical Hammersmith housing stock

Tight grids of two- and three-storey Victorian terraces around Brackenbury Village, larger stucco-fronted and villa houses toward Brook Green, and Edwardian red-brick mansion flats on the main approaches.

Streets we regularly draw for in Hammersmith

Brackenbury Road · Aldensley Road · Hammersmith Grove · Brook Green · Goldhawk Road

What W6 is actually built of

Measured from 388 classified residential buildings in W6, not from a description of the area.

Hammersmith W6 housing mix

Residential building form across the W6 postcode district, from 388 classified buildings.

Attached on more than one side80%
Attached on one side17%
Detached3%
Median building footprint63 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate2.68
Buildings classified388

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

House Extension Drawings for Hammersmith (W6) homes: the package and the process

Extension drawings are read for their dimensions. The proposed plan needs depth measured from the original rear wall — not from a previous extension — eaves and ridge heights taken from existing ground level, and the distance to each boundary marked. A site plan showing how much garden remains is what an officer reaches for when the amenity question comes up.

We draw the existing building accurately first, because everything else is measured from it. Where the original footprint has already been added to, that history goes on the drawing: it decides which allowances are still available and it is the first thing an officer checks against the council's own records.

The plot decides the extension type long before taste does. A mid-terrace has depth to work with and an alley if it is lucky; a semi has one clear flank; a detached house can go wide. Reading the building form first is what stops a design being drawn that the plot cannot take.

Which extension types do you draw?

Every London extension is shaped by the plot, the neighbours and the borough's design guidance. We draw them all.

Rear extension

A single-storey rear extension is often permitted development within depth limits — ideal for an open-plan kitchen-diner.

Side-return

Fills the alley beside a Victorian terrace, widening the ground floor without losing garden.

Wraparound

Combines a rear and side-return extension for a transformative ground floor, usually needing planning permission.

Double-storey

Adds space above and below, subject to tighter scale and neighbour-impact scrutiny.

Basement

Creates space downward where footprint is limited, with structural and party-wall care.

Do I need planning permission for a house extension in London?

Single-storey rear extensions within permitted development limits (up to 6m for terraced/semi-detached homes under the larger-home scheme, subject to neighbour consultation) may not need a full application. Wraparounds, double-storeys and anything in a conservation area usually do. We assess your plot and recommend the right route before drawing. The current depth, height and eaves limits are set out in full in the guide to planning permission for a rear extension, and where you would rather one practice ran the design, the application and the building-regulations stage together, Architectural Drawings covers that full scope.

How do you maximise the footprint the council will approve?

We know each borough's depth, height and daylight standards, so we design to the edge of what will be approved rather than guessing — and we check the 45-degree neighbour daylight rule and any rear building line before submission. Where a plot is tight we test a permitted-development scheme against a slightly larger householder application and show you the trade-off in space, cost and timescale, so the drawn scheme is the one that actually maximises value rather than just floor area.

Typical London extension drawing packages
ExtensionTypical routePackageFee from
Single-storey rearPermitted development / householderPlanning + building regs£1,100
Side-returnHouseholder planningPlanning + building regs + structural£1,600
WraparoundHouseholder planningFull package + structural£2,200
Double-storeyHouseholder planningFull package + structural£2,400
Sheet from a house extension drawings package drawn for a Hammersmith property in W6, showing the existing and proposed arrangement at scale
A sheet from the house extension drawings package we submit to London Borough of Hammersmith & Fulham for Hammersmith (W6) properties.
FAQ

House Extension Drawings in Hammersmith W6 — FAQs

How far can I extend without planning permission in London?+
Under permitted development, single-storey rear extensions can reach 3m (terraced/semi) or 4m (detached), or up to 6–8m under the prior-approval larger-home scheme — but conservation areas and Article 4 directions can remove these rights. We check your property first.
Do extension drawings include structural calculations?+
Our full package includes structural drawings and calculations coordinated in-house, so your builder can price and build without waiting on an engineer.
How long do extension drawings take?+
Typically about 7 days from survey to a full drawing set delivered to your online portal.
Will my rear extension need a party wall agreement?+
If you build up to or on a shared boundary, excavate near a neighbour's foundations, or cut into a party wall for a steel, the Party Wall etc. Act 1996 usually applies. Our drawings show the works clearly so a party wall surveyor — or your neighbour — can see exactly what is proposed, which keeps that process quick.
Can I extend a house in a conservation area?+
Yes, but conservation areas and Article 4 directions commonly remove permitted development for rear and side extensions, so the work needs a full householder application designed to the council's heritage guidance. We confirm your property's designation before recommending a route.
Do I need planning permission for a side-return extension in Hammersmith & Fulham?+
On the Victorian and Edwardian terraces of Fulham and Shepherd's Bush a single-storey side-return or rear extension can fall within permitted development, so a full application isn't always required. Conservation areas across Fulham, Brackenbury and Ravenscourt Park, and the Peterborough Estate, restrict this. We check your street's designation first and can confirm permitted development with a Lawful Development Certificate.
Will I need a Basement Impact Assessment for a basement in Hammersmith & Fulham?+
Likely, yes. The council applies a basement policy requiring a basement impact assessment for below-ground works, covering structural stability, drainage and groundwater. Basement extensions are common on these terraces, so if you are considering one we flag the requirement early and coordinate the structural input so the application is complete when submitted.
What is special about the Peterborough Estate 'Lion houses'?+
The Peterborough Estate's distinctive red-brick 'Lion houses' carry strong conservation control over their external character, so alterations are expected to respect the estate's materials and detailing. We design to that character and prepare a full householder application where permitted development doesn't apply, which is the reliable route to approval there.
How long does Hammersmith & Fulham take to decide?+
The council determines most householder applications within the statutory eight-week period once validated; basement and conservation cases can involve additional consultation. Because the terraces are party-wall-sensitive, we prepare submissions to the borough's residential extension and basement guidance to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Hammersmith & Fulham?+
We agree a fixed fee before we start, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until the council approves. A side-return, a loft and a basement differ in complexity, so we quote once we have seen your address and project rather than by the hour.
Free Fixed Quote

Get your free Hammersmith planning assessment

Tell us your Hammersmith (W6) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.