MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportDouble Storey Extension Drawings in Kensington & Chelsea

Stucco-fronted townhouses in Notting Hill, characteristic of the Royal Borough of Kensington and Chelsea
Kensington & Chelsea · London

Double Storey Extension Drawings in Kensington & Chelsea

Fixed-fee, MCIAT-chartered double storey extension drawings for Kensington & Chelsea homeowners — Royal Borough of Kensington and Chelsea validation and local constraints handled from the start.

Free Kensington & Chelsea planning assessment

Tell us your Kensington & Chelsea address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

The Royal Borough of Kensington and Chelsea is one of the most design-controlled authorities in the country: a very high proportion of its grand stucco-fronted townhouses, garden-square terraces, red-brick mansion blocks and cobbled mews houses are listed or sit within conservation areas. Designations such as Kensington, Chelsea, Ladbroke (Notting Hill), Holland Park, Brompton and Earl's Court Square carry detailed material and elevation control, so applications succeed on the strength of precise, heritage-led drawings rather than standard templates.

Permitted development can rarely be assumed here. Near-comprehensive conservation-area coverage across Kensington, Chelsea, Notting Hill and South Kensington and a high density of listed buildings mean a full planning application, and often listed-building consent for internal as well as external changes, is usually required even for modest works. The borough's basements policy is nationally known for restricting new basements, generally to a single storey, and controlling excavation extent alongside a basement impact assessment. A basement or extension can still be viable, but every scheme in Holland Park, Earl's Court or World's End must be designed to policy from the outset.

We prepare Kensington & Chelsea planning and listed-building submissions that respond to the borough's townscape and its restrictive basement and conservation policies, confirming the exact designations and listing status for your address before any design begins. You get a fixed fee agreed up front, the same council-accepted drawings an architect would produce for usually around 30% less, a roughly seven-day drawing turnaround and free redraws until the council approves. Most householder applications are determined within the statutory eight weeks once validated, though listed-building and basement cases attract more consultation, so a validation-first approach matters.

Stucco-fronted townhouses in Notting Hill, characteristic of the Royal Borough of Kensington and Chelsea
Isometric illustration of a Kensington & Chelsea home extension design
Proposed floor plan
Kensington & Chelsea

Planning in Kensington & Chelsea: what to know before you apply

In Kensington & Chelsea, permitted development can rarely be assumed: near-comprehensive conservation-area coverage and a high density of listed buildings mean a full planning application — and often listed-building consent — is usually required even for modest works. The borough's basements policy generally limits new basements to a single storey and controls their extent. We confirm every constraint up front.

Typical Kensington & Chelsea housing stock

Grand stucco-fronted Victorian townhouses, garden-square terraces, red-brick mansion blocks and cobbled mews houses — a very high proportion of which are listed or sit within conservation areas.

Areas we regularly draw for in Kensington & Chelsea

Kensington · Chelsea · Notting Hill · Holland Park · Earl's Court · South Kensington · World's End

What the numbers say about Kensington & Chelsea planning decisions

These are Royal Borough of Kensington and Chelsea’s own reported figures, published by government rather than estimated by us. They are what we design against — a borough that refuses one householder application in five needs a different drawing package from one that refuses one in twenty.

Permitted development in Kensington & Chelsea

Larger householder extensions put to Royal Borough of Kensington and Chelsea under the prior-approval route, and lawful-development certificates decided, over eight quarters.

Prior approval not requiredWent ahead without a full application0
Prior approval granted0
Prior approval refused0
Building upwards, prior approval refused0
Certificates of lawful development decided80

Source: Ministry of Housing, Communities and Local Government (PS1 district planning application statistics). Open Government Licence v3.0 Extracted 2026-08-16.

What removes permitted development in Kensington & Chelsea

Live entries on the national planning registers for Royal Borough of Kensington and Chelsea. Article 4 directions withdraw permitted development rights, so a project inside one needs a full application rather than prior approval. Revoked and expired entries are excluded.

Article 4 directions in force84
Areas they coverOne direction can cover many separate areas84
Conservation areasPermitted development is already narrower inside one41

Source: MHCLG Planning Data Platform. Open Government Licence v3.0 Extracted 2026-08-16.

Double Storey Extension Drawings for Kensington & Chelsea homes: the package and the process

At first-floor level the drawings have to answer for daylight, privacy and massing. That means proposed elevations showing every new window with its position relative to the boundary, a section taken through the extension and the neighbouring building, and a roof form drawn to sit below the existing ridge rather than compete with it.

We draw the neighbouring property alongside your own, because the officer's assessment is comparative — the effect on their windows and outlook is the test. Setting the first floor in from the boundary, and showing that set-back as a dimension, resolves most objections before consultation begins.

At first floor the boundary relationship decides everything. A detached house has room to set the addition in on both sides; a semi has one shared wall and one clear flank; a mid-terrace can usually only go to the rear, where the effect on both neighbours has to be drawn.

Do I need planning permission for a double storey extension in London?

Almost always. Permitted development rights for two-storey extensions are far more restrictive than for single-storey work, particularly on how close the new structure can come to a boundary and how closely its roof pitch and eaves height must match the existing house, so most double storey projects are drawn and submitted as full householder planning applications rather than relying on permitted development.

Where the property sits in a conservation area or is subject to an Article 4 direction, any remaining permitted development allowance for a second storey is typically removed entirely, reinforcing the need for a full application. We check your property's status and your borough's design guidance before drawing.

How do councils control the impact of a double storey extension on neighbours?

Because a second storey introduces new windows and massing at first-floor level, London boroughs apply design guidance aimed specifically at protecting neighbouring light, privacy and outlook.

  • The 45-degree rule, tested at neighbouring windows, to check the extension does not block an unreasonable amount of daylight
  • A common design expectation that a two-storey side extension is set in roughly 1 metre from the shared boundary, rather than built hard against it
  • A first floor commonly set back from the ground floor front elevation, so the upper storey reads as subordinate to the main house from the street
  • Obscure or high-level glazing on flank walls facing directly into a neighbour's garden or windows, to limit overlooking

Matching the roofline and materials

Planning officers assess a double storey extension heavily on how convincingly it reads as part of the original house rather than an addition bolted onto the side. Our drawings match ridge height, roof pitch, eaves detail and brick or render finish to the existing building wherever the design brief allows, which is consistently one of the strongest factors in securing approval without delay or redesign. Where a subtly contrasting material is proposed instead — a different brick tone, or a zinc or slate roof against a tiled original — we set it out clearly on the elevations so the design intent reads as deliberate rather than a mismatch, which is how most London boroughs prefer a genuine design statement to be presented.

Extending once vs twice: single versus double storey
OptionWhat it addsTypical fee
Single-storey rear extensionA ground-floor kitchen-diner only, may qualify for permitted developmentsee Rear Extension Drawings, from £1,100
Double storey side or rear extensionTwo rooms across two floors, usually needs full planningFull Planning pack ~£1,600–£2,400
Double storey + Building Regulations (structural)Combined pack including structural calculations for two-floor loads and foundationsPlanning + Building Regs pack ~£2,200–£3,850
Wraparound (rear + side return)Combines two single-storey extensions into one L-shaped ground floorsee Wraparound Extension Drawings, from £2,200
Sheet from a double storey extension drawings package prepared for a Kensington & Chelsea property, drawn to Royal Borough of Kensington and Chelsea validation standards
A sheet from the double storey extension drawings package we submit to Royal Borough of Kensington and Chelsea.
FAQ

Double Storey Extension Drawings in Kensington & Chelsea — FAQs

How much does a double storey extension cost to design in London?+
Double storey extension drawings start from £2,400, covering full planning permission and structural design for the additional floor. A combined planning and building regulations package with full structural calculations runs up to around £3,850, fixed and agreed upfront.
Do I need planning permission to add a second storey?+
In almost all cases, yes. Permitted development rights for two-storey extensions are much tighter than for single-storey work, particularly around boundary distance and roof matching, so we design double storey projects on the assumption a full householder planning application is required.
Will a double storey extension overlook my neighbour's garden?+
That is exactly what planning officers check, using the 45-degree daylight rule alongside boundary set-in and first-floor set-back guidance. Where a new flank window would look directly into a neighbour's garden, we typically specify obscure or high-level glazing to address it before submission rather than after an objection.
Do I need an architect for a double storey extension?+
No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, producing the same council-accepted drawings and in-house structural coordination as an architect, for a fixed fee typically around 30% lower, with structural calculations for the additional floor produced by the same team rather than a separately appointed engineer.
How long does it take to get double storey extension drawings?+
Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period once submitted.
Do I need planning permission for works in Kensington & Chelsea?+
Almost always. Near-comprehensive conservation-area coverage and a high density of listed buildings mean a full planning application — and often listed-building consent — is usually required even for modest works. Permitted development can rarely be assumed here. We confirm the exact designations and listing status for your address before any design begins.
Can I build a basement in Kensington & Chelsea?+
Within limits. The borough's basements policy is nationally known for restricting new basements — generally to a single storey — and controlling excavation extent, alongside a basement impact assessment. A basement can still be viable, but it must be designed to the policy from the outset. We confirm what your site allows and evidence the scheme accordingly.
My home is listed — what consent do I need?+
Listed-building consent is usually required alongside or instead of planning permission, and internal as well as external changes can be controlled. Given the borough's extensive listed-building coverage across Kensington, Chelsea and the mews, we screen listing status first and prepare the heritage-led drawings and justification the council expects.
How long does the Royal Borough take to decide?+
The council determines most householder applications within the statutory eight-week period once validated, though listed-building, basement and conservation cases frequently attract additional consultation. We prepare submissions to the borough's exacting validation and design standards to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Kensington & Chelsea?+
We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until the council approves. Heritage-led and listed-building schemes require more evidence than a standard extension, so we quote once we understand your address and scheme rather than by the hour.
Free Fixed Quote

Get your free Kensington & Chelsea planning assessment

Tell us your Kensington & Chelsea address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.