MCIAT chartered drawings · Fixed fees across all 33 London boroughs

Free 2026 London Planning ReportDouble Storey Extension Drawings in Kensington W8

Listed stucco terraces and mansion flats in Kensington W8, where the Royal Borough of Kensington and Chelsea controls basement and internal conversion works
Kensington · W8 · Kensington & Chelsea

Double Storey Extension Drawings in Kensington W8

Fixed-fee, MCIAT-chartered double storey extension drawings for Kensington (W8) homeowners — Royal Borough of Kensington and Chelsea validation and local constraints handled from the start.

Free Kensington planning assessment

Tell us your Kensington (W8) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Kensington (W8) is one of RBKC's grandest residential quarters — stucco terraces and garden squares around Kensington Palace and Kensington High Street, with a large listed and flat-converted stock. Projects here are typically internal reconfigurations, rear and closet-wing alterations, roof and mansard work, and carefully argued basement schemes rather than street-facing extensions.

Because nearly all of W8 lies within a conservation area and much of it is listed, we prepare drawings and heritage-led justification to the Royal Borough of Kensington and Chelsea's exacting standard — respecting the rhythm of the terrace, original joinery and railings, and the borough's tight controls on subterranean and rear works.

Listed stucco terraces and mansion flats in Kensington W8, where the Royal Borough of Kensington and Chelsea controls basement and internal conversion works
Isometric illustration of a Kensington W8 home double storey extension drawings design
Proposed floor plan
Kensington W8

Planning in Kensington (W8): what to know before you apply

There is no published householder Article 4 direction here, but conservation-area status across W8 already removes most permitted-development rights and listed-building consent commonly applies. RBKC's subterranean development policy typically restricts basements to a single storey and tightly governs construction logistics.

Typical Kensington housing stock

W8 is defined by its white stucco-fronted terraces and garden-square houses around Kensington Palace and the High Street, a large share of them statutorily listed. Much of the stock has been divided into flats or held as substantial single houses, so work here concentrates on internal reconfiguration, roof and rear alterations, and basement schemes rather than visible front changes.

Streets we regularly draw for in Kensington

Kensington Court · Pembridge Gardens · Linden Gardens · Kensington Gore

What W8 is actually built of

Measured from 410 classified residential buildings in W8, not from a description of the area.

Kensington W8 housing mix

Residential building form across the W8 postcode district, from 410 classified buildings.

Attached on more than one side80%
Attached on one side16%
Detached3%
Median building footprint79 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate2.96
Buildings classified410

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Double Storey Extension Drawings for Kensington (W8) homes: the package and the process

At first-floor level the drawings have to answer for daylight, privacy and massing. That means proposed elevations showing every new window with its position relative to the boundary, a section taken through the extension and the neighbouring building, and a roof form drawn to sit below the existing ridge rather than compete with it.

We draw the neighbouring property alongside your own, because the officer's assessment is comparative — the effect on their windows and outlook is the test. Setting the first floor in from the boundary, and showing that set-back as a dimension, resolves most objections before consultation begins.

At first floor the boundary relationship decides everything. A detached house has room to set the addition in on both sides; a semi has one shared wall and one clear flank; a mid-terrace can usually only go to the rear, where the effect on both neighbours has to be drawn.

Do I need planning permission for a double storey extension in London?

Almost always. Permitted development rights for two-storey extensions are far more restrictive than for single-storey work, particularly on how close the new structure can come to a boundary and how closely its roof pitch and eaves height must match the existing house, so most double storey projects are drawn and submitted as full householder planning applications rather than relying on permitted development.

Where the property sits in a conservation area or is subject to an Article 4 direction, any remaining permitted development allowance for a second storey is typically removed entirely, reinforcing the need for a full application. We check your property's status and your borough's design guidance before drawing.

How do councils control the impact of a double storey extension on neighbours?

Because a second storey introduces new windows and massing at first-floor level, London boroughs apply design guidance aimed specifically at protecting neighbouring light, privacy and outlook.

  • The 45-degree rule, tested at neighbouring windows, to check the extension does not block an unreasonable amount of daylight
  • A common design expectation that a two-storey side extension is set in roughly 1 metre from the shared boundary, rather than built hard against it
  • A first floor commonly set back from the ground floor front elevation, so the upper storey reads as subordinate to the main house from the street
  • Obscure or high-level glazing on flank walls facing directly into a neighbour's garden or windows, to limit overlooking

Matching the roofline and materials

Planning officers assess a double storey extension heavily on how convincingly it reads as part of the original house rather than an addition bolted onto the side. Our drawings match ridge height, roof pitch, eaves detail and brick or render finish to the existing building wherever the design brief allows, which is consistently one of the strongest factors in securing approval without delay or redesign. Where a subtly contrasting material is proposed instead — a different brick tone, or a zinc or slate roof against a tiled original — we set it out clearly on the elevations so the design intent reads as deliberate rather than a mismatch, which is how most London boroughs prefer a genuine design statement to be presented.

Extending once vs twice: single versus double storey
OptionWhat it addsTypical fee
Single-storey rear extensionA ground-floor kitchen-diner only, may qualify for permitted developmentsee Rear Extension Drawings, from £1,100
Double storey side or rear extensionTwo rooms across two floors, usually needs full planningFull Planning pack ~£1,600–£2,400
Double storey + Building Regulations (structural)Combined pack including structural calculations for two-floor loads and foundationsPlanning + Building Regs pack ~£2,200–£3,850
Wraparound (rear + side return)Combines two single-storey extensions into one L-shaped ground floorsee Wraparound Extension Drawings, from £2,200
Sheet from a double storey extension drawings package drawn for a Kensington property in W8, showing the existing and proposed arrangement at scale
A sheet from the double storey extension drawings package we submit to Royal Borough of Kensington and Chelsea for Kensington (W8) properties.
FAQ

Double Storey Extension Drawings in Kensington W8 — FAQs

How much does a double storey extension cost to design in London?+
Double storey extension drawings start from £2,400, covering full planning permission and structural design for the additional floor. A combined planning and building regulations package with full structural calculations runs up to around £3,850, fixed and agreed upfront.
Do I need planning permission to add a second storey?+
In almost all cases, yes. Permitted development rights for two-storey extensions are much tighter than for single-storey work, particularly around boundary distance and roof matching, so we design double storey projects on the assumption a full householder planning application is required.
Will a double storey extension overlook my neighbour's garden?+
That is exactly what planning officers check, using the 45-degree daylight rule alongside boundary set-in and first-floor set-back guidance. Where a new flank window would look directly into a neighbour's garden, we typically specify obscure or high-level glazing to address it before submission rather than after an objection.
Do I need an architect for a double storey extension?+
No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, producing the same council-accepted drawings and in-house structural coordination as an architect, for a fixed fee typically around 30% lower, with structural calculations for the additional floor produced by the same team rather than a separately appointed engineer.
How long does it take to get double storey extension drawings?+
Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period once submitted.
Do I need planning permission for works in Kensington & Chelsea?+
Almost always. Near-comprehensive conservation-area coverage and a high density of listed buildings mean a full planning application — and often listed-building consent — is usually required even for modest works. Permitted development can rarely be assumed here. We confirm the exact designations and listing status for your address before any design begins.
Can I build a basement in Kensington & Chelsea?+
Within limits. The borough's basements policy is nationally known for restricting new basements — generally to a single storey — and controlling excavation extent, alongside a basement impact assessment. A basement can still be viable, but it must be designed to the policy from the outset. We confirm what your site allows and evidence the scheme accordingly.
My home is listed — what consent do I need?+
Listed-building consent is usually required alongside or instead of planning permission, and internal as well as external changes can be controlled. Given the borough's extensive listed-building coverage across Kensington, Chelsea and the mews, we screen listing status first and prepare the heritage-led drawings and justification the council expects.
How long does the Royal Borough take to decide?+
The council determines most householder applications within the statutory eight-week period once validated, though listed-building, basement and conservation cases frequently attract additional consultation. We prepare submissions to the borough's exacting validation and design standards to avoid the drawing queries that cause most delays.
How much do planning drawings cost in Kensington & Chelsea?+
We agree a fixed fee before starting, typically around 30% below an architect's fee for the same council-accepted drawings, with free redraws until the council approves. Heritage-led and listed-building schemes require more evidence than a standard extension, so we quote once we understand your address and scheme rather than by the hour.
Free Fixed Quote

Get your free Kensington planning assessment

Tell us your Kensington (W8) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.