Rear extension on a 1950s council-built house on the Thames View estate, IG11, in Barking and Dagenham

Thames View · IG11 · Barking & Dagenham

Rear Extension Drawings in Thames View IG11

Fixed-fee, MCIAT-chartered rear extension drawings for Thames View (IG11) homeowners — London Borough of Barking and Dagenham validation and local constraints handled from the start.

Thames View (IG11) is a cohesive 1950s London County Council overspill estate, built on former marshland south of Barking town centre as a planned postwar community of low-rise council-built houses and blocks. That open, uniform estate layout — quite distinct from the borough's older terraced streets — is what shapes nearly every householder project here, so an extension has to sit comfortably within a very consistent, planned streetscape.

There is no conservation area covering Thames View — that is a genuine, verified fact, not an omission. Its planning character is shaped instead by the sheer uniformity of the estate layout and by Barking and Dagenham's householder design expectations, which lean on keeping the original postwar rhythm, materials and building lines intact. We treat that estate cohesion, rather than a conservation designation, as the reference point when we design an extension.

Because so many Thames View houses passed into private ownership after Right to Buy, demand for rear extensions, side infills and loft conversions is steady across streets like Bastable Avenue, Maplestead Road and Moore Crescent. We check each property's permitted-development position against Barking and Dagenham's borough-wide controls first, then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.

Proposed floor plan

Thames View IG11

Thames View (IG11) — planning at a glance

Council: London Borough of Barking and Dagenham
Postcode district: IG11
Planning portal: View the Barking & Dagenham planning portal
Housing stock: Cohesive 1950s council-built houses and low-rise blocks arranged on a planned, open postwar layout, many now privately owned following Right to Buy — which is what drives the steady flow of rear-extension and loft-conversion work across the estate.
Article 4: No area-specific Article 4 direction is published for the Thames View Estate; the London Borough of Barking and Dagenham's borough-wide permitted-development controls and householder design guidance still apply.
Sample streets: Bastable Avenue · River Road · Renwick Road · Choats Road · Upney Lane · Stamford Road · Aconbury Road · Pinley Gardens · Burnham Road · Maplestead Road · Castle Road · Moore Crescent
Local constraints: Strong estate-wide visual cohesion: the uniform 1950s layout of low-rise council-built houses on an open plan means front-elevation changes, roof forms and materials are read against a consistent street rhythm rather than a one-off houseBarking and Dagenham's borough-wide permitted-development limits and householder design guidance govern extension depth, height and coverage; no local Article 4 direction narrows those rights further on the estateMatching original facing brick, render finishes and roof tiles so a rear or side addition reads as part of the original postwar house rather than an obvious bolt-onOpen estate layouts and shared or generous frontages, where a front or side addition can affect the planned spacing and the wider street scenePostwar houses with shared and adjoining building lines, making party-wall relationships and overshadowing relevant to what gets approvedLow-lying former-marshland ground south of Barking near the river, so ground conditions and any Environment Agency flood-zone position are worth checking early as they affect foundation and drainage design at building-regulations stage

Planning in Thames View (IG11): what to know before you apply

Because the estate is so uniform, Barking and Dagenham assess extensions on Thames View houses against the consistent postwar street pattern, so matching brick, render and roof form matters more than on a mixed-typology road. There is no conservation area and no estate-specific Article 4 direction, so many houses retain permitted development rights for rear and loft work — but the open estate layout, shared building lines and low-lying former-marshland ground mean spacing, neighbour impact and drainage are the points an application turns on.

Typical Thames View housing stock

Cohesive 1950s council-built houses and low-rise blocks arranged on a planned, open postwar layout, many now privately owned following Right to Buy — which is what drives the steady flow of rear-extension and loft-conversion work across the estate.

Streets we regularly draw for in Thames View

Bastable Avenue · River Road · Renwick Road · Choats Road · Upney Lane · Stamford Road · Aconbury Road · Pinley Gardens · Burnham Road · Maplestead Road · Castle Road · Moore Crescent

What IG11 is actually built of

Measured from 261 classified residential buildings in IG11, not from a description of the area.

Thames View IG11 housing mix

Residential building form across the IG11 postcode district, from 261 classified buildings.

Attached on more than one side	60%
Attached on one side	38%
Detached	2%
Median building footprint	59 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	1.92
Buildings classified	261

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Rear Extension Drawings for Thames View (IG11) homes: the package and the process

Depth is the number the application turns on, and it has to be measured from the original rear wall of the house rather than from whatever is there now. The drawings carry that dimension, the eaves and ridge heights, the position of any rooflight, and the boundary distances on both sides.

Where the scheme goes beyond the standard allowance and relies on the larger home extension route, the drawings serve a second purpose: they are what the council sends to the neighbours during the consultation. A clear, dimensioned proposed elevation answers the objection about overshadowing before it is made.

Depth is limited by the plot as much as by the rules. A long garden behind a terrace can take the full allowance, while a short one runs out before the rules do — and on a semi or detached house the same depth reads very differently from the boundary.

Do I need planning permission for a rear extension in London?

Many single-storey rear extensions qualify as permitted development, meaning no planning application is needed, provided depth, height and materials stay within set limits. That changes if your property sits in a conservation area or is subject to an Article 4 direction, both of which can remove permitted development rights across a street or borough — in that case a full householder planning application is required regardless of size.

Even where an extension qualifies, most homeowners obtain a Lawful Development Certificate to confirm that status in writing before building — useful for mortgage lenders, buyers and Building Control. We check your property against your borough's constraints before recommending a route.

How deep can a single-storey rear extension go?

Depth is the main constraint on a rear extension, and it depends on your house type and whether you use standard permitted development or the larger home extension scheme.

Permitted development

Standard permitted development allows a single-storey rear extension up to 3 metres deep for terraced and semi-detached houses, or 4 metres for detached houses, generally with eaves height limited to match or stay close to the existing house.

Larger home extension scheme

The prior-approval scheme extends this to 6 metres for terraced and semi-detached houses and 8 metres for detached houses. Your council writes to affected neighbours; if none object within the notification period, approval follows without a full planning application. If an objection is raised, the council assesses the impact on neighbouring light and outlook itself, rather than automatically refusing, so a well-considered design still has a good chance of approval.

Designing the kitchen-diner: rooflights, bi-folds and daylight

Most rear extensions exist to create one open-plan kitchen, dining and living space, so the drawing work focuses on getting light and flow right within the depth you are allowed.

Structural opening sized for bi-fold or sliding doors across most of the rear elevation
Rooflights or a roof lantern positioned to light the centre of the room, away from the shadow line of the main house
Open-plan layout tested against the 45-degree rule, which protects daylight to your neighbours' windows and can limit how close a flank wall or roof comes to the boundary
Floor build-up and threshold detail coordinated so the new floor meets the existing one without a step

Rear extension routes at a glance
Route	When it applies	Typical fee
Permitted development (Lawful Development Certificate)	Depth within 3m (terraced/semi) or 4m (detached), height and materials within PD limits	PD/LDC pack ~£950–£1,450
Larger home extension (prior approval)	Depth up to 6m (terraced/semi) or 8m (detached), with neighbour notification	from £1,100
Full householder planning permission	Extension exceeds PD/larger-home limits, or the property is in a conservation area with an Article 4 direction	Full Planning pack ~£1,600–£2,400
Planning + Building Regulations (structural)	Combined planning and construction-ready pack with structural calculations for the opening and roof	Planning + Building Regs pack ~£2,200–£3,850

Sheet from a rear extension drawings package drawn for a Thames View property in IG11, showing the existing and proposed arrangement at scale — A sheet from the rear extension drawings package we submit to London Borough of Barking and Dagenham for Thames View (IG11) properties.

Also in Thames View IG11

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings Rear Extension Drawings across Barking & Dagenham Rear Extension Drawings across London

FAQ

Rear Extension Drawings in Thames View IG11 — FAQs

How much does a rear extension cost to design in London?+

Rear extension drawings start from £1,100, with the final fee set by the route your extension takes — permitted development, prior approval or full planning — and whether you need building regulations and structural calculations bundled in. The fee is fixed and agreed upfront.

Do I need an architect for a rear extension?+

No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, producing the same council-accepted drawings as an architect for a fixed fee typically around 30% lower.

How long does it take to get rear extension drawings?+

Drawings are typically ready around 7 days from survey. Once submitted, councils have a statutory 8-week period to determine a standard householder planning application.

What is the 45-degree rule?+

It is a daylight test many London councils apply to check that a rear extension does not block too much light to a neighbour's nearest window, measured as a line drawn at 45 degrees from that window. We check it before submission, not after a refusal.

Will I need a Party Wall Agreement for a rear extension?+

Only if your foundations or new walls sit on or near the boundary with a neighbouring property. A straightforward rear extension set within your own plot often does not trigger the Party Wall etc. Act 1996, unlike a Side Return or Wraparound extension, which usually does.

Do I need planning permission to extend a house in Thames View?+

Not always. Many Thames View houses retain permitted development rights, so a modest single-storey rear extension or a rear loft conversion can often proceed without a full planning application. Because the estate is uniform and the ground is low-lying former marshland, we check your property's size limits, building lines and drainage against Barking and Dagenham's controls first, and prepare a full householder application where the project goes beyond permitted development.

Is Thames View in a conservation area?+

No. There is no conservation area covering the Thames View Estate. Its planning character is shaped instead by the estate's uniform 1950s layout of low-rise council-built houses and Barking and Dagenham's householder design expectations, which favour keeping the original postwar street rhythm, materials and roof form intact when you extend.

How much do planning and building-regulation drawings cost for a Thames View extension?+

We work to fixed fees agreed before we start, with a typical turnaround of around seven days for a standard rear extension or loft on a Thames View house. As a chartered architectural technologist practice we produce the same council-accepted planning and building-regulation drawings as an architect, usually for a lower fee, and include free redraws until your application is approved.

How long does Barking & Dagenham Council take to decide?+

The council determines most householder applications within the statutory eight-week period once validated; conservation cases can attract additional consultation. The commonest delay is a validation query, so we prepare submissions to the council's checklist with correctly scaled existing and proposed drawings and a location plan.

Free Fixed Quote

Get your free Thames View planning assessment

Tell us your Thames View (IG11) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.