Planning Drawings in Kensington W8
Fixed-fee, MCIAT-chartered planning drawings for Kensington (W8) homeowners — Royal Borough of Kensington and Chelsea validation and local constraints handled from the start.
Kensington (W8) is one of RBKC's grandest residential quarters — stucco terraces and garden squares around Kensington Palace and Kensington High Street, with a large listed and flat-converted stock. Projects here are typically internal reconfigurations, rear and closet-wing alterations, roof and mansard work, and carefully argued basement schemes rather than street-facing extensions.
Because nearly all of W8 lies within a conservation area and much of it is listed, we prepare drawings and heritage-led justification to the Royal Borough of Kensington and Chelsea's exacting standard — respecting the rhythm of the terrace, original joinery and railings, and the borough's tight controls on subterranean and rear works.
Planning in Kensington (W8): what to know before you apply
There is no published householder Article 4 direction here, but conservation-area status across W8 already removes most permitted-development rights and listed-building consent commonly applies. RBKC's subterranean development policy typically restricts basements to a single storey and tightly governs construction logistics.
Typical Kensington housing stock
W8 is defined by its white stucco-fronted terraces and garden-square houses around Kensington Palace and the High Street, a large share of them statutorily listed. Much of the stock has been divided into flats or held as substantial single houses, so work here concentrates on internal reconfiguration, roof and rear alterations, and basement schemes rather than visible front changes.
Streets we regularly draw for in Kensington
Kensington Court · Pembridge Gardens · Linden Gardens · Kensington Gore
What W8 is actually built of
Measured from 410 classified residential buildings in W8, not from a description of the area.
Kensington W8 housing mix
Residential building form across the W8 postcode district, from 410 classified buildings.
| Attached on more than one side | 80% |
|---|---|
| Attached on one side | 16% |
| Detached | 3% |
| Median building footprint | 79 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 2.96 |
| Buildings classified | 410 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Planning Drawings for Kensington (W8) homes: the package and the process
A planning set is judged as a set, not as individual sheets. Every existing drawing needs its proposed counterpart at the same scale and orientation so the officer can read the change at a glance, each sheet needs its own number, title, scale bar and north point, and the whole package needs to survive being printed at A3 without a dimension becoming illegible.
We draw to the conventions validation teams expect: plans and elevations at 1:100 or 1:50, a location plan at 1:1250 with the site edged red, a block plan at 1:500, and sections cut where the change in level or roof form actually happens rather than where they are easiest to draw.
The drawing list itself changes with the building. A detached house needs four elevations; a mid-terrace needs two plus a section through the party walls to show what is not visible from outside. Getting that list right at the start is what stops a validation officer asking for a sheet three weeks in.
What is included in a planning drawing set?
A council will only validate an application that contains the right drawings at the right scale. Our standard planning set covers everything a London validation team expects.
- Site location plan (1:1250) and block plan (1:500)
- Existing floor plans, elevations and sections
- Proposed floor plans, elevations and sections
- Roof plans where relevant, with heights and materials annotated
- A design and access or heritage statement where the borough requires one
How are planning drawings different from building regulations drawings?
Planning drawings show what the building will look like and how it sits in its context. Building regulations drawings show how it will be built safely — structure, insulation, fire escape and drainage. Most projects need both; our Complete package covers the two together with structural calculations coordinated in-house.
How quickly can you produce planning drawings in London?
After a laser survey, a standard householder set is typically ready within 7 days. We review every drawing against your borough's validation checklist before it reaches a planner's desk, which is why our first-time approval rate sits around 96%.
| Drawing | Typical scale | What it shows |
|---|---|---|
| Site location plan | 1:1250 | The property in its street context, site edged red |
| Block plan | 1:500 | The building's footprint and position in the plot |
| Floor plans (existing & proposed) | 1:100 / 1:50 | Room layout, walls, openings and the proposed changes |
| Elevations (existing & proposed) | 1:100 / 1:50 | Each face of the building and how it changes |
| Sections | 1:100 / 1:50 | A cut through showing heights, levels and roof form |
Planning Drawings in Kensington W8 — FAQs
What scale should London planning drawings be?+
Do I need an architect to produce planning drawings?+
How many revisions are included in the fee?+
Can you draw from my existing plans?+
Do planning drawings guarantee approval?+
Do I need planning permission for works in Kensington & Chelsea?+
Can I build a basement in Kensington & Chelsea?+
My home is listed — what consent do I need?+
How long does the Royal Borough take to decide?+
How much do planning drawings cost in Kensington & Chelsea?+
Get your free Kensington planning assessment
Tell us your Kensington (W8) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.