Loft Conversion Drawings in Coombe KT2
Fixed-fee, MCIAT-chartered loft conversion drawings for Coombe (KT2) homeowners — Royal Borough of Kingston upon Thames validation and local constraints handled from the start.
KT2 north of Kingston takes in Coombe, an exclusive district of large detached houses set in landscaped grounds around the Coombe Hill and Coombe Wood golf courses, where owners typically plan a substantial extension, remodelling or an occasional new-build replacement.
Several Coombe conservation areas overlap this outcode, so even though Kingston operates no Article 4 directions a boundary check remains essential, because the low-density, tree-rich character means conservation-area consent and tree constraints often shape what can be built.
Planning in Coombe (KT2): what to know before you apply
Kingston has no Article 4 directions, so outside the conservation areas many householder projects fall under permitted development. Within the Coombe conservation areas, conservation-area consent applies to demolition and larger schemes are best taken through a full householder application, with tree preservation orders checked early.
Typical Coombe housing stock
The Coombe conservation areas hold large Victorian, Edwardian and 20th-century detached houses in spacious landscaped grounds, several by notable architects, set among golf courses and mature woodland north of Kingston town centre.
Streets we regularly draw for in Coombe
Coombe Hill Road · Coombe Lane West · Warren Road · George Road
What KT2 is actually built of
Measured from 327 classified residential buildings in KT2, not from a description of the area.
Coombe KT2 housing mix
Residential building form across the KT2 postcode district, from 327 classified buildings.
| Attached on more than one side | 28% |
|---|---|
| Attached on one side | 48% |
| Detached | 25% |
| Median building footprint | 69 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 1.39 |
| Buildings classified | 327 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
Loft Conversion Drawings for Coombe (KT2) homes: the package and the process
A loft stands or falls on the section drawing. It has to prove usable head height along the length of the room, a staircase that meets the going and headroom rules without eating the landing below, floor joists sized for a habitable load rather than storage, and a means of escape that Building Control will accept — usually a protected stair, sometimes an escape window.
The same section does the planning work too, showing roof volume, ridge height and how the new form sits against the existing roof. Where the conversion relies on permitted development we set the volume out on the drawing as a calculation, so the position is evidenced rather than asserted.
Roof shape decides which conversion is even possible. A hipped roof has to become a gable before it offers full-width space; a shallow pitch may not deliver head height at any cost; and a terrace with a rear outrigger opens up an L-shaped option a detached house has no use for.
Do I need planning permission for a loft conversion in London?
Many loft conversions are permitted development, but volume limits (40m³ for terraced homes, 50m³ for detached and semi-detached), materials and the presence of a conservation area or Article 4 direction can change that. We assess your roof and borough and recommend the fastest lawful route — often a Lawful Development Certificate rather than a full planning application. A certificate is worth having even when the work is clearly permitted: it gives your buyer's solicitor and your building-control surveyor documentary proof the loft is lawful, which matters when you sell.
Which loft conversion type suits your roof?
The best conversion depends on your roof shape and the headroom it offers.
Dormer
A box dormer adds headroom and floor area at the rear and is the most common London loft — frequently permitted development.
Mansard
A mansard rebuilds the rear (or front and rear) roof slope for maximum space, common in conservation areas but usually needing planning permission.
Hip-to-gable
Extends a hipped roof to a vertical gable, ideal for semi-detached and end-of-terrace homes.
Velux / rooflight
The simplest option — rooflights within the existing roofline, almost always permitted development.
What building regulations apply to a loft conversion?
Loft conversions must meet fire escape, structural and insulation standards — a protected stairway, adequate floor joists and beams, and often a means of escape window. A loft that adds a third storey to a two-storey house triggers stricter fire-separation rules, including fire doors to habitable rooms off the new stairway. We coordinate the structural calculations with the drawings so the build proceeds without delays.
| Loft type | Best for | Usual route | Fee from |
|---|---|---|---|
| Velux / rooflight | Roofs with existing headroom | Permitted development / LDC | £1,100 |
| Dormer | Rear headroom + floor area | Permitted development / LDC | £1,300 |
| Hip-to-gable | Semi and end-of-terrace roofs | Permitted development or planning | £1,600 |
| Mansard | Maximum space, conservation areas | Full planning application | £2,200 |
Loft Conversion Drawings in Coombe KT2 — FAQs
How much do loft conversion drawings cost in London?+
Will my loft need a fire escape window?+
Is a dormer loft permitted development?+
Can I convert my loft if I live in a conservation area?+
Do you provide the structural calculations for the steels?+
Do I need planning permission for an extension in Kingston?+
My Kingston home is near the river — does flood risk affect my plans?+
Can I build a larger extension on a Coombe plot?+
How long does the Royal Borough of Kingston take to decide?+
How much do planning drawings cost in Kingston?+
Get your free Coombe planning assessment
Tell us your Coombe (KT2) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.