House Extension Drawings in Bow E3
Fixed-fee, MCIAT-chartered house extension drawings for Bow (E3) homeowners — London Borough of Tower Hamlets validation and local constraints handled from the start.
Bow (E3) in Tower Hamlets is defined by Tredegar Square — the most complete Georgian square in the East End, and the reason a substantial share of E3 householder work is governed by listed building consent rather than permitted development. The surrounding stock is largely Victorian terrace along Bow Road and the Roman Road, with post-war estates filling the gaps.
The Tredegar Square conservation area closely controls frontages, railings and rooflines, and many of the houses in and around the square are listed, which means external alterations need listed building consent alongside planning. Fairfield Road covers the historic industrial frontages including the former Bryant and May match factory, where conversion schemes are assessed against that industrial character, and the Tower Hamlets Cemetery conservation area brings tree protection and setting considerations to the streets nearby. We check listing and designation for an E3 address before drawing to Tower Hamlets' guidance.
Planning in Bow (E3): what to know before you apply
E3 has no householder Article 4 direction, so unlisted Bow houses outside the conservation areas retain permitted development rights for rear and loft work. The controls that matter are elsewhere: Tredegar Square is a substantially complete Georgian square where many houses are listed and listed building consent governs external alterations; Fairfield Road protects the historic industrial frontages including the former match factory; and the Tower Hamlets Cemetery conservation area adds tree and setting considerations to the surrounding streets.
Typical Bow housing stock
Georgian terraces around Tredegar Square — the most complete Georgian square in the East End — with Victorian terraces along the Roman Road and Bow Road, and post-war estates between them.
Streets we regularly draw for in Bow
Bow Road · Roman Road · Tredegar Square · Fairfield Road
What E3 is actually built of
Measured from 396 classified residential buildings in E3, not from a description of the area.
Bow E3 housing mix
Residential building form across the E3 postcode district, from 396 classified buildings.
| Attached on more than one side | 78% |
|---|---|
| Attached on one side | 16% |
| Detached | 5% |
| Median building footprint | 53 m² |
| Addresses per buildingAbove about 2 means flats and maisonettes dominate | 4.49 |
| Buildings classified | 396 |
Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.
House Extension Drawings for Bow (E3) homes: the package and the process
Extension drawings are read for their dimensions. The proposed plan needs depth measured from the original rear wall — not from a previous extension — eaves and ridge heights taken from existing ground level, and the distance to each boundary marked. A site plan showing how much garden remains is what an officer reaches for when the amenity question comes up.
We draw the existing building accurately first, because everything else is measured from it. Where the original footprint has already been added to, that history goes on the drawing: it decides which allowances are still available and it is the first thing an officer checks against the council's own records.
The plot decides the extension type long before taste does. A mid-terrace has depth to work with and an alley if it is lucky; a semi has one clear flank; a detached house can go wide. Reading the building form first is what stops a design being drawn that the plot cannot take.
Which extension types do you draw?
Every London extension is shaped by the plot, the neighbours and the borough's design guidance. We draw them all.
Rear extension
A single-storey rear extension is often permitted development within depth limits — ideal for an open-plan kitchen-diner.
Side-return
Fills the alley beside a Victorian terrace, widening the ground floor without losing garden.
Wraparound
Combines a rear and side-return extension for a transformative ground floor, usually needing planning permission.
Double-storey
Adds space above and below, subject to tighter scale and neighbour-impact scrutiny.
Basement
Creates space downward where footprint is limited, with structural and party-wall care.
Do I need planning permission for a house extension in London?
Single-storey rear extensions within permitted development limits (up to 6m for terraced/semi-detached homes under the larger-home scheme, subject to neighbour consultation) may not need a full application. Wraparounds, double-storeys and anything in a conservation area usually do. We assess your plot and recommend the right route before drawing. The current depth, height and eaves limits are set out in full in the guide to planning permission for a rear extension, and where you would rather one practice ran the design, the application and the building-regulations stage together, Architectural Drawings covers that full scope.
How do you maximise the footprint the council will approve?
We know each borough's depth, height and daylight standards, so we design to the edge of what will be approved rather than guessing — and we check the 45-degree neighbour daylight rule and any rear building line before submission. Where a plot is tight we test a permitted-development scheme against a slightly larger householder application and show you the trade-off in space, cost and timescale, so the drawn scheme is the one that actually maximises value rather than just floor area.
| Extension | Typical route | Package | Fee from |
|---|---|---|---|
| Single-storey rear | Permitted development / householder | Planning + building regs | £1,100 |
| Side-return | Householder planning | Planning + building regs + structural | £1,600 |
| Wraparound | Householder planning | Full package + structural | £2,200 |
| Double-storey | Householder planning | Full package + structural | £2,400 |
House Extension Drawings in Bow E3 — FAQs
How far can I extend without planning permission in London?+
Do extension drawings include structural calculations?+
How long do extension drawings take?+
Will my rear extension need a party wall agreement?+
Can I extend a house in a conservation area?+
Do I need planning permission for an extension in Tower Hamlets?+
My Tower Hamlets property is listed — what consent do I need?+
Can you handle a warehouse or riverside conversion in Wapping or Limehouse?+
How long does Tower Hamlets Council take to decide?+
How much do planning drawings cost in Tower Hamlets?+
Get your free Bow planning assessment
Tell us your Bow (E3) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.