Rear extension behind a Victorian cottage in Bexley Village DA5, London Borough of Bexley

Bexley Village · DA5 · Bexley

House Extension Drawings in Bexley Village DA5

Fixed-fee, MCIAT-chartered house extension drawings for Bexley Village (DA5) homeowners — London Borough of Bexley validation and local constraints handled from the start.

Bexley Village (DA5) sits on the River Cray at the south-eastern edge of the borough, where the historic High Street winds down past cottages and shops to the green and St John's Church. Rear and side extensions on the Victorian and Edwardian houses ringing the old core are the most common projects here, and the village's semi-rural setting on the edge of the Metropolitan Green Belt shapes how the council reads them.

The Old Bexley Conservation Area, first designated in 1971 and extended in 1987, covers the winding High Street, the green and the riverside around the old ford, protecting 18 listed buildings and the prevailing local brick. Where a DA5 property sits relative to that boundary decides whether roofline, window and front-elevation changes are permitted development or need consent.

Proposed floor plan

Bexley Village DA5

Bexley Village (DA5) — planning at a glance

Council: London Borough of Bexley
Postcode district: DA5
Planning portal: View the Bexley planning portal
Housing stock: The conservation-area core is a tight grain of 18th- and 19th-century brick cottages, listed timber-framed houses and Victorian shopfronts along the winding High Street, giving way to Edwardian villas and inter-war semis on the rising ground toward Bexley station and Parkhill Road.
Article 4: The Old Bexley Conservation Area is covered by an Article 4(2) Direction that removes permitted-development rights for alterations to front elevations, roofs, chimneys, windows and highway-facing boundary walls, so like-for-like changes there still require a householder application.
Conservation: Old Bexley
Sample streets: High Street · Tanyard Lane · Manor Road · North Cray Road
Local constraints: Old Bexley Conservation Area control over the winding High Street, the green and the riverside setting around the old fordOld Bexley Conservation Area Article 4(2) Direction removing permitted-development rights for front elevations, roofs, windows, chimneys and highway-facing boundaries18 listed buildings in the village core where any alteration needs listed-building consentMetropolitan Green Belt and River Cray setting on the eastern and southern edges constraining rearward and outward extension

Planning in Bexley Village (DA5): what to know before you apply

Inside the Old Bexley Conservation Area the Article 4(2) Direction means front-elevation, roof, window and boundary changes that would be permitted development elsewhere need a full householder application, and the 18 listed buildings additionally require listed-building consent. Beyond the boundary, on the Edwardian and inter-war streets toward the station, many rear and loft projects still fall within permitted development, so we check the boundary and the Green Belt edge before advising a route.

Typical Bexley Village housing stock

The conservation-area core is a tight grain of 18th- and 19th-century brick cottages, listed timber-framed houses and Victorian shopfronts along the winding High Street, giving way to Edwardian villas and inter-war semis on the rising ground toward Bexley station and Parkhill Road.

Streets we regularly draw for in Bexley Village

High Street · Tanyard Lane · Manor Road · North Cray Road

What DA5 is actually built of

Measured from 275 classified residential buildings in DA5, not from a description of the area.

Bexley Village DA5 housing mix

Residential building form across the DA5 postcode district, from 275 classified buildings.

Attached on more than one side	28%
Attached on one side	48%
Detached	25%
Median building footprint	84 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	1.08
Buildings classified	275

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

House Extension Drawings for Bexley Village (DA5) homes: the package and the process

Extension drawings are read for their dimensions. The proposed plan needs depth measured from the original rear wall — not from a previous extension — eaves and ridge heights taken from existing ground level, and the distance to each boundary marked. A site plan showing how much garden remains is what an officer reaches for when the amenity question comes up.

We draw the existing building accurately first, because everything else is measured from it. Where the original footprint has already been added to, that history goes on the drawing: it decides which allowances are still available and it is the first thing an officer checks against the council's own records.

The plot decides the extension type long before taste does. A mid-terrace has depth to work with and an alley if it is lucky; a semi has one clear flank; a detached house can go wide. Reading the building form first is what stops a design being drawn that the plot cannot take.

Which extension types do you draw?

Every London extension is shaped by the plot, the neighbours and the borough's design guidance. We draw them all.

Rear extension

A single-storey rear extension is often permitted development within depth limits — ideal for an open-plan kitchen-diner.

Side-return

Fills the alley beside a Victorian terrace, widening the ground floor without losing garden.

Wraparound

Combines a rear and side-return extension for a transformative ground floor, usually needing planning permission.

Double-storey

Adds space above and below, subject to tighter scale and neighbour-impact scrutiny.

Basement

Creates space downward where footprint is limited, with structural and party-wall care.

Do I need planning permission for a house extension in London?

Single-storey rear extensions within permitted development limits (up to 6m for terraced/semi-detached homes under the larger-home scheme, subject to neighbour consultation) may not need a full application. Wraparounds, double-storeys and anything in a conservation area usually do. We assess your plot and recommend the right route before drawing. The current depth, height and eaves limits are set out in full in the guide to planning permission for a rear extension, and where you would rather one practice ran the design, the application and the building-regulations stage together, Architectural Drawings covers that full scope.

How do you maximise the footprint the council will approve?

We know each borough's depth, height and daylight standards, so we design to the edge of what will be approved rather than guessing — and we check the 45-degree neighbour daylight rule and any rear building line before submission. Where a plot is tight we test a permitted-development scheme against a slightly larger householder application and show you the trade-off in space, cost and timescale, so the drawn scheme is the one that actually maximises value rather than just floor area.

Typical London extension drawing packages
Extension	Typical route	Package	Fee from
Single-storey rear	Permitted development / householder	Planning + building regs	£1,100
Side-return	Householder planning	Planning + building regs + structural	£1,600
Wraparound	Householder planning	Full package + structural	£2,200
Double-storey	Householder planning	Full package + structural	£2,400

Sheet from a house extension drawings package drawn for a Bexley Village property in DA5, showing the existing and proposed arrangement at scale — A sheet from the house extension drawings package we submit to London Borough of Bexley for Bexley Village (DA5) properties.

Also in Bexley Village DA5

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings House Extension Drawings across Bexley House Extension Drawings across London

FAQ

House Extension Drawings in Bexley Village DA5 — FAQs

How far can I extend without planning permission in London?+

Under permitted development, single-storey rear extensions can reach 3m (terraced/semi) or 4m (detached), or up to 6–8m under the prior-approval larger-home scheme — but conservation areas and Article 4 directions can remove these rights. We check your property first.

Do extension drawings include structural calculations?+

Our full package includes structural drawings and calculations coordinated in-house, so your builder can price and build without waiting on an engineer.

How long do extension drawings take?+

Typically about 7 days from survey to a full drawing set delivered to your online portal.

Will my rear extension need a party wall agreement?+

If you build up to or on a shared boundary, excavate near a neighbour's foundations, or cut into a party wall for a steel, the Party Wall etc. Act 1996 usually applies. Our drawings show the works clearly so a party wall surveyor — or your neighbour — can see exactly what is proposed, which keeps that process quick.

Can I extend a house in a conservation area?+

Yes, but conservation areas and Article 4 directions commonly remove permitted development for rear and side extensions, so the work needs a full householder application designed to the council's heritage guidance. We confirm your property's designation before recommending a route.

Do I need planning permission for an extension in Bexley?+

Bexley has no borough-wide Article 4 direction affecting typical householder permitted development, so its semi-detached homes often keep fuller rights than inner-London terraces — larger rear and single-storey extensions can qualify. Conservation areas such as Old Bexley Village and Danson Park, and riverside flood-zone constraints toward Erith, restrict this. We check your address first and can confirm permitted development with a Lawful Development Certificate.

Can I build a bigger extension because Bexley plots are larger?+

Often, yes. The generous interwar plots across Bexleyheath, Sidcup and Welling make substantial rear and double-storey extensions viable where a tight terrace could not. The limit is usually design and amenity policy rather than space. We design to use the plot fully within permitted-development allowances or a well-evidenced full application.

What extra control applies in Old Bexley Village or around Danson Park?+

These conservation areas carry design control over materials, rooflines and front elevations, and the Upton area of Bexleyheath includes the setting of William Morris's Red House. Permitted development is often restricted there, so we design to the area's character and prepare a full, context-led application where a standard permitted-development route doesn't apply.

How long does Bexley Council take to decide?+

Bexley determines most householder applications within the statutory eight-week period once validated; conservation cases can involve additional consultation. A complete, correctly scaled submission is the best way to avoid a validation query — we prepare Bexley drawings to the council's checklist to keep the application on track.

How much do planning drawings cost in Bexley?+

We quote a fixed fee upfront, typically around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Bexley approves. Because plots here allow larger schemes, the fee tracks complexity — a single-storey rear differs from a double-storey — and we confirm it once we understand your plans.

Free Fixed Quote

Get your free Bexley Village planning assessment

Tell us your Bexley Village (DA5) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.