Wraparound Extension Drawings in Lewisham
Fixed-fee, MCIAT-chartered wraparound extension drawings for Lewisham homeowners — London Borough of Lewisham validation and local constraints handled from the start.
Lewisham is terraced South-East London: the Victorian and Edwardian streets of Brockley, Forest Hill and Hither Green make side-return extensions and hip-to-gable loft conversions the borough's signature projects, giving way to the Georgian-fringed heath at Blackheath, the historic Deptford High Street and the post-war estates around Catford and central Lewisham. The right route depends heavily on the street — a rear extension in Hither Green is a very different application from a roof alteration in the Brockley conservation area.
Design control shapes much of the borough. Conservation areas at Blackheath, Brockley, Telegraph Hill, Deptford High Street, Ladywell and Lee Manor govern materials, rooflines and front elevations, while the dense terraced streets bring side-return and rear-depth control and party-wall sensitivity between neighbours. Sloping sites and long views across the Honor Oak and Forest Hill ridges further shape extension design, and a borough-wide Article 4 direction removes permitted development for change of use to an HMO (C3 to C4) anywhere in the borough — though it leaves standard family extensions and lofts unaffected.
We prepare Lewisham planning drawings to the council's householder and validation standards, checking permitted development eligibility for terraces and semis first and designing to conservation-area expectations where Blackheath, Brockley or Telegraph Hill applies. It is the same council-accepted drawing set an architect would produce, usually at around 30% less, with a fixed fee agreed up front, a roughly seven-day drawing turnaround and free redraws until the London Borough of Lewisham approves. Most householder applications are decided within the statutory eight-week period once validated, so we draw to the validation checklist from the outset to avoid the queries that cause most delay.
Planning in Lewisham: what to know before you apply
Lewisham operates a borough-wide Article 4 direction removing permitted development rights for HMO conversions, and controls design within its conservation areas — Blackheath, Brockley and Telegraph Hill in particular. For the borough's abundant terraces, side-returns and hip-to-gable lofts frequently qualify as permitted development; we confirm the designation for your street before drawing.
Typical Lewisham housing stock
Victorian and Edwardian terraces across Brockley, Forest Hill and Hither Green, Georgian and early-Victorian housing around Blackheath and Deptford, and post-war estate housing through Catford and central Lewisham.
Areas we regularly draw for in Lewisham
Lewisham · Deptford · Brockley · Forest Hill · Catford · Sydenham · Hither Green · Blackheath
What the numbers say about Lewisham planning decisions
These are London Borough of Lewisham’s own reported figures, published by government rather than estimated by us. They are what we design against — a borough that refuses one householder application in five needs a different drawing package from one that refuses one in twenty.
Permitted development in Lewisham
Larger householder extensions put to London Borough of Lewisham under the prior-approval route, and lawful-development certificates decided, over eight quarters.
| Prior approval not requiredWent ahead without a full application | 103 |
|---|---|
| Prior approval granted | 4 |
| Prior approval refused | 71 |
| Granted where a decision was neededFrom 75 determinations | 5% |
| Building upwards, prior approval refused | 1 |
| Certificates of lawful development decided | 752 |
Source: Ministry of Housing, Communities and Local Government (PS1 district planning application statistics). Open Government Licence v3.0 Extracted 2026-08-16.
What removes permitted development in Lewisham
Live entries on the national planning registers for London Borough of Lewisham. Article 4 directions withdraw permitted development rights, so a project inside one needs a full application rather than prior approval. Revoked and expired entries are excluded.
| Article 4 directions in force | 57 |
|---|---|
| Areas they coverOne direction can cover many separate areas | 89 |
| Areas withdrawing Class A | 20 |
| Areas withdrawing Class C | 19 |
| Areas withdrawing Class F | 18 |
| Areas withdrawing Class D | 17 |
| Areas withdrawing Class E | 9 |
| Areas withdrawing Class H | 3 |
| Conservation areasPermitted development is already narrower inside one | 30 |
Source: MHCLG Planning Data Platform. Open Government Licence v3.0 Extracted 2026-08-16.
Wraparound Extension Drawings for Lewisham homes: the package and the process
A wraparound is assessed as one addition, so the drawings have to present it as one: a single proposed footprint with the rear depth and the side width both dimensioned, the roof drawn as it turns the corner, and the remaining garden shown on the site plan.
The corner is where the technical work sits. Two roof planes and two structural spans meet at the return, drainage has to get round it, and the internal opening is usually wide enough to need a designed frame rather than a single beam. We resolve that junction on the drawings before it becomes a question on site.
A wraparound needs both a rear garden and a side alley, which in practice means a terrace or end-of-terrace with an outrigger. Where only one of the two exists, the honest answer is a rear extension or a side return — the combined footprint has nowhere to turn the corner.
What makes a wraparound extension different from a rear or side return alone?
A rear extension adds depth at the back of the house; a side return adds width down the alley; a wraparound does both at once, so the new floor area turns the corner of the original building rather than sitting against just one wall. The result is typically the largest open-plan space a single-storey extension can deliver, but it also means more of the original external wall is removed and more of the roof is new, which raises the structural and drainage stakes compared with either extension on its own. Homeowners who start out planning a rear extension or a side return alone often move to a wraparound once they see how little extra it costs to combine the two, since much of the groundwork, roof structure and glazing is shared between them rather than duplicated.
Do wraparound extensions need full planning permission in London?
Almost always, yes. Permitted development allowances are calculated on combined additions to the original house, and a wraparound's depth plus width together generally exceed the volume and footprint limits that apply to a rear extension or side extension considered separately. A Lawful Development Certificate route is rarely viable for a genuine wraparound.
Conservation area status and Article 4 directions, common across the terraced streets where wraparound extensions are most popular, remove permitted development rights further still, so we design every wraparound on the assumption it will go through full householder planning.
Structural design for a wraparound extension
Because the new space turns a corner, the structural frame has to work as one continuous system rather than two independent extensions bolted together.
- A continuous steel or ring-beam frame carrying the roof around the internal corner where the rear and side elements meet
- A glazed roof lantern or rooflight strip often placed at the corner junction, where natural light reaches deepest into the combined plan
- Foundations for both the rear and side elements designed together, so they tie into the existing house consistently
- Bi-fold or sliding doors across the rear elevation, coordinated with the side glazing so the two elements read as one space
| Route | What it covers | Typical fee |
|---|---|---|
| Full planning permission | Required for almost all wraparound extensions given the combined footprint | Full Planning pack ~£1,600–£2,400 |
| Planning + Building Regulations (structural) | Combined pack including structural calculations for the L-shaped frame and drainage diversion | Planning + Building Regs pack ~£2,200–£3,850 |
| Rear extension alone (comparison) | Smaller single-storey addition, may qualify for permitted development | see Rear Extension Drawings, from £1,100 |
| Side return alone (comparison) | Widens the kitchen only, keeps garden depth unchanged | see Side Return Extension Drawings, from £1,400 |
Wraparound Extension Drawings across Lewisham
Wraparound Extension Drawings in Lewisham — FAQs
How much does a wraparound extension cost to design in London?+
Does a wraparound extension always need planning permission?+
Do I need an architect for a wraparound extension?+
Will I need a Party Wall Agreement for a wraparound extension?+
How long does it take to get wraparound extension drawings?+
Do I need planning permission for a side-return extension in Lewisham?+
What does Lewisham's borough-wide HMO Article 4 direction affect?+
Can I convert the loft on my Lewisham terrace?+
How long does Lewisham Council take to decide?+
How much do planning drawings cost in Lewisham?+
Get your free Lewisham planning assessment
Tell us your Lewisham address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.