MCIAT chartered drawings · Fixed fees across all 33 London boroughs
[email protected]020 7864 7245WhatsApp

Free 2026 London Planning Report — Side Return Extension Drawings in Gidea Park RM2

Rear garden extension behind a detached Gidea Park garden-suburb house in Havering RM2
Gidea Park · RM2 · Havering

Side Return Extension Drawings in Gidea Park RM2

Fixed-fee, MCIAT-chartered side return extension drawings for Gidea Park (RM2) homeowners — London Borough of Havering validation and local constraints handled from the start.

Free Gidea Park planning assessment

Tell us your Gidea Park (RM2) address and project. A fixed quote and free planning appraisal land within one working day.

No obligation · No spam · Reply within 1 working day

Gidea Park (RM2) is one of Havering's most tightly protected neighbourhoods — a designated garden suburb of detached architect-designed houses where the Gidea Park Conservation Area carries a confirmed Article 4 direction. That direction removes the permitted development rights most homeowners rely on, so alterations here almost always need a formal application.

Because the estate's character rests on generous plots, deep gardens and consistent building lines, Havering scrutinises anything that disrupts that rhythm. We prepare drawings to the conservation-area appraisal and the Article 4 control levels so extensions, dormers and even window or boundary changes are presented in a form the borough will accept.

Rear garden extension behind a detached Gidea Park garden-suburb house in Havering RM2
Isometric illustration of a Gidea Park RM2 home side return extension drawings design
Proposed floor plan
Gidea Park RM2

Planning in Gidea Park (RM2): what to know before you apply

Unlike most of Havering, Gidea Park has a confirmed Article 4 direction (Art4/4/2015) covering the whole conservation area, so permitted development rights are withdrawn under Control Level 1 or 2. Assume nearly all external householder work needs express planning consent and design that respects the garden-suburb layout.

Typical Gidea Park housing stock

Almost entirely detached houses on generous plots, many by named Arts-and-Crafts-era architects from the 1910-11 exhibition estates, set on wide tree-lined roads with deep front gardens and mature planting.

Streets we regularly draw for in Gidea Park

Reed Pond Walk · Meadway · Heath Drive · Balgores Lane

What RM2 is actually built of

Measured from 138 classified residential buildings in RM2, not from a description of the area.

Gidea Park RM2 housing mix

Residential building form across the RM2 postcode district, from 138 classified buildings.

Attached on more than one side29%
Attached on one side52%
Detached19%
Median building footprint84 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate1.47
Buildings classified138

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Side Return Extension Drawings for Gidea Park (RM2) homes: the package and the process

A side return is a structural drawing as much as a planning one. Removing the original flank wall to open the kitchen into the infill needs a beam and a padstone detail, and the new roof has to be drawn where it meets both the existing rear elevation and the boundary wall.

The boundary is the sensitive line. The drawings set out where the new wall sits relative to it, how the roof drains without discharging next door, and where rooflights fall so the officer can see the room is lit without overlooking. That detail is also what your party wall surveyor will ask for.

The extension only exists where the alley does. Mid-terrace and end-of-terrace houses with a rear outrigger are the classic case; a semi with a flank path is a different scheme with different boundary questions; and a detached house has no side return to infill at all.

Do I need planning permission for a side return extension in London?

Permitted development rights for side extensions are narrower than for rear extensions: they generally cap the extension at a single storey, restrict its width to no more than half the width of the original house, and limit its height. In practice, a full-depth side return running the length of a Victorian or Edwardian terrace usually exceeds one or more of these limits, so most side return projects are drawn and submitted as a full householder planning application.

Conservation area status and Article 4 directions, common across inner London terraces, remove permitted development rights for side extensions entirely in many streets, reinforcing the need for a planning application. We check your property's status before drawing.

What does a side return extension involve?

A side return infills the alley at ground floor level, structurally opening the original flank wall of the kitchen into the new space so the two areas read as one room. Unlike a rear extension, which is bounded on three sides by your own garden, a side return is bounded on one long side by the neighbouring property, which shapes almost every decision in the design, from where the roof glazing sits to how deep the new foundations need to go.

  • New flank wall built out to align with the rear of the house, following the boundary line
  • Original external wall between kitchen and alley opened up and supported on a steel or glulam beam
  • Roof over the new space either glazed in full, glazed in a strip along the boundary for a 'light well' effect, or pitched and tiled to match the main roof
  • Kitchen re-planned across the combined footprint, often incorporating an island once the room widens

Will I need a Party Wall Agreement for a side return extension?

Almost certainly. Because the new side wall is built on or immediately against the boundary with the neighbouring property, the Party Wall etc. Act 1996 applies, and your neighbour must be formally notified before work starts. We prepare the drawings and dimensions your Party Wall surveyor needs, and time the notice period so it runs alongside, rather than after, your planning application.

Side return project options
PackageWhat it coversTypical fee
Side return, planning onlyFull householder planning application drawings for the infillFull Planning pack ~£1,600–£2,400
Side return, planning + Building RegulationsAdds structural calculations, Party Wall drawings and construction detailPlanning + Building Regs pack ~£2,200–£3,850
Side return + rear extension (wraparound)Combines both extensions into one L-shaped ground floorsee Wraparound Extension Drawings
Measured survey onlyA measured existing floor-plan set for your own architect, surveyor or builderfrom £450
Sheet from a side return extension drawings package drawn for a Gidea Park property in RM2, showing the existing and proposed arrangement at scale
A sheet from the side return extension drawings package we submit to London Borough of Havering for Gidea Park (RM2) properties.

Also in Gidea Park RM2

Planning PermissionPlanning DrawingsArchitectural DrawingsBuilding Regulations DrawingsLoft Conversion DrawingsSide Return Extension Drawings across HaveringSide Return Extension Drawings across London
FAQ

Side Return Extension Drawings in Gidea Park RM2 — FAQs

How much does a side return extension cost to design in London?+
Side return drawings start from £1,400. The final fee depends on whether you commission planning drawings alone or a combined planning and building regulations package with structural calculations, all fixed and agreed upfront.
Can I build a side return under permitted development?+
Rarely for a full-width, full-depth side return. Permitted development for side extensions is limited on width and storeys, and most Victorian and Edwardian terraces sit in conservation areas that remove these rights anyway, so a full planning application is the usual route. We still check your specific property first, since some semi-detached and detached houses outside conservation areas retain more generous side-extension allowances.
When do I need to serve Party Wall notice on my neighbour?+
Before work starts, and ideally once your drawings and structural design are settled, since the notice needs accurate dimensions. We can prepare the supporting drawings alongside your planning application so both processes run in parallel.
Do I need an architect for a side return extension?+
No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, so you get the same council-accepted drawings as an architect, for a fixed fee typically around 30% lower, with structural calculations produced in-house.
How long does a side return extension take to design and approve?+
Drawings are typically ready around 7 days from survey. A householder planning application then has a statutory 8-week determination period, running alongside your Party Wall notice period.
Do I need planning permission for an extension in Havering?+
Havering has no borough-wide Article 4 direction affecting typical householder permitted development, so its detached and semi-detached homes often keep fuller rights than inner-London terraces — larger rear and single-storey extensions can qualify. Green-belt land toward the east and conservation areas such as Upminster and Emerson Park restrict this. We check your address first and can confirm permitted development with a Lawful Development Certificate.
How does green-belt land affect my Havering project?+
On green-belt properties toward the borough's eastern and northern edges, extensions are assessed against strict limits on disproportionate additions to the original dwelling. It does not rule out an extension, but scale and siting matter and the case must be evidenced carefully. We confirm whether your property is green belt and design a scheme that stays within policy.
Can I build a bigger extension because Havering plots are larger?+
Often, yes. The generous interwar and detached plots across Hornchurch, Emerson Park and Upminster make substantial rear and double-storey extensions viable where a tight terrace could not. The limit is usually policy rather than space. We design to use the plot fully within permitted-development allowances or a well-evidenced full application.
How long does Havering Council take to decide?+
Havering determines most householder applications within the statutory eight-week period once validated; green-belt and conservation cases can involve additional consultation. A complete, correctly scaled submission is the best way to avoid a validation query — we prepare Havering drawings to the council's checklist to keep the application on track.
How much do planning drawings cost in Havering?+
We quote a fixed fee upfront, typically around 30% below an architect's charge for the same council-accepted drawings, with free redraws until Havering approves. Because plots here allow larger schemes, the fee tracks complexity — a single-storey rear differs from a double-storey or a green-belt case — and we confirm it once we understand your plans.
Free Fixed Quote

Get your free Gidea Park planning assessment

Tell us your Gidea Park (RM2) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.