Rear extension and loft project on a dockside terraced house in Custom House E16, in the Royal Docks area of Newham

Custom House · E16 · Newham

Rear Extension Drawings in Custom House E16

Fixed-fee, MCIAT-chartered rear extension drawings for Custom House (E16) homeowners — London Borough of Newham validation and local constraints handled from the start.

Custom House (E16) grew as Victorian dock-worker housing around the Royal Victoria Dock, which opened in 1855, and now sits inside the Royal Docks regeneration and Enterprise Zone. Surviving and postwar-rebuilt terraces sit alongside major new-build development around the ExCeL and the Elizabeth line, so householder work here is largely extensions and lofts on the terraced houses that line the residential streets.

There is no conservation area covering the Custom House part of E16 — that is a genuine, verified fact, not an omission. Its planning character is instead shaped by the working dockside terraced grain and the surrounding regeneration, and by the London Borough of Newham's householder design expectations, which lean on keeping original building lines, materials and roof continuity intact. We treat that terraced character, rather than a conservation designation, as the reference point when we design an extension.

Demand for rear extensions and loft conversions runs steadily across residential streets like Tollgate Road, Rogers Road and Chadwin Road, where compact terraced houses sit on modest plots. We check each property's permitted-development position against Newham's borough-wide controls first — and any surface-water drainage points given the low-lying dockside land — then prepare drawings that either stay within permitted development or are ready to validate as a full householder application.

Proposed floor plan

Custom House E16

Custom House (E16) — planning at a glance

Council: London Borough of Newham
Postcode district: E16
Planning portal: View the Newham planning portal
Housing stock: A mix of surviving and postwar-rebuilt terraced housing with substantial new-build apartments across the Royal Docks regeneration area. It is the terraced houses on the residential streets, rather than the apartment blocks, that generate most of the rear-extension and loft-conversion work here.
Article 4: No area-specific Article 4 direction is published for the Custom House part of E16; the London Borough of Newham's borough-wide permitted-development controls and householder design guidance still apply.
Sample streets: Barrier Point Road · Tollgate Road · Rayleigh Road · Wesley Avenue · Rogers Road · Ruscoe Road · Egham Road · Chadwin Road · Cranley Road · Selby Road · Caraway Close · Eclipse Road
Local constraints: A mixed dockside grain where surviving and postwar-rebuilt terraces sit close to major new-build development, so extension proposals are read against the prevailing rhythm and building line of each individual residential street rather than one uniform patternNewham's borough-wide permitted-development limits and householder design guidance govern extension depth, height and coverage — no local Article 4 direction narrows them further in the Custom House part of E16Matching original facing brick and roof tiles on terraced runs so a rear or loft addition reads as part of the original house rather than an obvious bolt-onCompact terraced plots and modest rear gardens, which constrain how deep a single-storey rear extension can go before it needs a full householder applicationTerraced forms with party walls on both sides, making party-wall relationships, roof-line continuity and overshadowing central to what gets approvedLow-lying land within the Royal Docks regeneration area near the Thames, where surface-water and flood-risk drainage considerations can bear on a householder scheme

Planning in Custom House (E16): what to know before you apply

Because Custom House is a dockside mix of surviving and rebuilt terraces set within the Royal Docks regeneration area, Newham assess extensions against the prevailing rhythm and building line of the individual residential street, so matching original brick, roof continuity and neighbour relationships matters alongside the numbers. There is no conservation area and no local Article 4 direction in the Custom House part of E16, so many terraced houses retain permitted development rights for rear and loft work — but compact plots, shared party walls and low-lying land mean depth, height, neighbour impact and drainage are the points a householder application is judged on.

Typical Custom House housing stock

A mix of surviving and postwar-rebuilt terraced housing with substantial new-build apartments across the Royal Docks regeneration area. It is the terraced houses on the residential streets, rather than the apartment blocks, that generate most of the rear-extension and loft-conversion work here.

Streets we regularly draw for in Custom House

Barrier Point Road · Tollgate Road · Rayleigh Road · Wesley Avenue · Rogers Road · Ruscoe Road · Egham Road · Chadwin Road · Cranley Road · Selby Road · Caraway Close · Eclipse Road

What E16 is actually built of

Measured from 274 classified residential buildings in E16, not from a description of the area.

Custom House E16 housing mix

Residential building form across the E16 postcode district, from 274 classified buildings.

Attached on more than one side	68%
Attached on one side	27%
Detached	4%
Median building footprint	50 m²
Addresses per buildingAbove about 2 means flats and maisonettes dominate	2.42
Buildings classified	274

Source: Ordnance Survey National Geographic Database (derived statistics). Contains OS data © Crown copyright and database right 2026. Contains Royal Mail data © Royal Mail copyright and database right 2026. Extracted 2026-08-17.

Rear Extension Drawings for Custom House (E16) homes: the package and the process

Depth is the number the application turns on, and it has to be measured from the original rear wall of the house rather than from whatever is there now. The drawings carry that dimension, the eaves and ridge heights, the position of any rooflight, and the boundary distances on both sides.

Where the scheme goes beyond the standard allowance and relies on the larger home extension route, the drawings serve a second purpose: they are what the council sends to the neighbours during the consultation. A clear, dimensioned proposed elevation answers the objection about overshadowing before it is made.

Depth is limited by the plot as much as by the rules. A long garden behind a terrace can take the full allowance, while a short one runs out before the rules do — and on a semi or detached house the same depth reads very differently from the boundary.

Do I need planning permission for a rear extension in London?

Many single-storey rear extensions qualify as permitted development, meaning no planning application is needed, provided depth, height and materials stay within set limits. That changes if your property sits in a conservation area or is subject to an Article 4 direction, both of which can remove permitted development rights across a street or borough — in that case a full householder planning application is required regardless of size.

Even where an extension qualifies, most homeowners obtain a Lawful Development Certificate to confirm that status in writing before building — useful for mortgage lenders, buyers and Building Control. We check your property against your borough's constraints before recommending a route.

How deep can a single-storey rear extension go?

Depth is the main constraint on a rear extension, and it depends on your house type and whether you use standard permitted development or the larger home extension scheme.

Permitted development

Standard permitted development allows a single-storey rear extension up to 3 metres deep for terraced and semi-detached houses, or 4 metres for detached houses, generally with eaves height limited to match or stay close to the existing house.

Larger home extension scheme

The prior-approval scheme extends this to 6 metres for terraced and semi-detached houses and 8 metres for detached houses. Your council writes to affected neighbours; if none object within the notification period, approval follows without a full planning application. If an objection is raised, the council assesses the impact on neighbouring light and outlook itself, rather than automatically refusing, so a well-considered design still has a good chance of approval.

Designing the kitchen-diner: rooflights, bi-folds and daylight

Most rear extensions exist to create one open-plan kitchen, dining and living space, so the drawing work focuses on getting light and flow right within the depth you are allowed.

Structural opening sized for bi-fold or sliding doors across most of the rear elevation
Rooflights or a roof lantern positioned to light the centre of the room, away from the shadow line of the main house
Open-plan layout tested against the 45-degree rule, which protects daylight to your neighbours' windows and can limit how close a flank wall or roof comes to the boundary
Floor build-up and threshold detail coordinated so the new floor meets the existing one without a step

Rear extension routes at a glance
Route	When it applies	Typical fee
Permitted development (Lawful Development Certificate)	Depth within 3m (terraced/semi) or 4m (detached), height and materials within PD limits	PD/LDC pack ~£950–£1,450
Larger home extension (prior approval)	Depth up to 6m (terraced/semi) or 8m (detached), with neighbour notification	from £1,100
Full householder planning permission	Extension exceeds PD/larger-home limits, or the property is in a conservation area with an Article 4 direction	Full Planning pack ~£1,600–£2,400
Planning + Building Regulations (structural)	Combined planning and construction-ready pack with structural calculations for the opening and roof	Planning + Building Regs pack ~£2,200–£3,850

Sheet from a rear extension drawings package drawn for a Custom House property in E16, showing the existing and proposed arrangement at scale — A sheet from the rear extension drawings package we submit to London Borough of Newham for Custom House (E16) properties.

Also in Custom House E16

Planning Permission Planning Drawings Architectural Drawings Building Regulations Drawings Loft Conversion Drawings Rear Extension Drawings across Newham Rear Extension Drawings across London

FAQ

Rear Extension Drawings in Custom House E16 — FAQs

How much does a rear extension cost to design in London?+

Rear extension drawings start from £1,100, with the final fee set by the route your extension takes — permitted development, prior approval or full planning — and whether you need building regulations and structural calculations bundled in. The fee is fixed and agreed upfront.

Do I need an architect for a rear extension?+

No. DrawingsDirect is an MCIAT-chartered architectural technologist practice, producing the same council-accepted drawings as an architect for a fixed fee typically around 30% lower.

How long does it take to get rear extension drawings?+

Drawings are typically ready around 7 days from survey. Once submitted, councils have a statutory 8-week period to determine a standard householder planning application.

What is the 45-degree rule?+

It is a daylight test many London councils apply to check that a rear extension does not block too much light to a neighbour's nearest window, measured as a line drawn at 45 degrees from that window. We check it before submission, not after a refusal.

Will I need a Party Wall Agreement for a rear extension?+

Only if your foundations or new walls sit on or near the boundary with a neighbouring property. A straightforward rear extension set within your own plot often does not trigger the Party Wall etc. Act 1996, unlike a Side Return or Wraparound extension, which usually does.

Do I need planning permission to extend a house in Custom House?+

Not always. Many Custom House terraced houses retain permitted development rights, so a modest single-storey rear extension or a rear loft conversion can often proceed without a full planning application. Because the terraced plots are compact and sit on low-lying dockside land, we check your property's size limits, party-wall lines and any drainage points against Newham's controls first, and prepare a full householder application where the project goes beyond permitted development.

Is Custom House in a conservation area?+

No. There is no conservation area covering the Custom House part of E16. Its planning character is shaped instead by the working dockside terraced grain, the surrounding Royal Docks regeneration and Newham's householder design expectations, which favour keeping original building lines, materials and roof continuity intact when you extend.

How much do planning and building-regulation drawings cost for a Custom House extension?+

We work to fixed fees agreed before we start, with a typical turnaround of around seven days for a standard rear extension or loft on a Custom House terraced house. As a chartered architectural technologist practice we produce the same council-accepted planning and building-regulation drawings as an architect, usually for a lower fee, and include free redraws until your application is approved.

How long does Newham Council take to decide?+

Newham determines most householder applications within the statutory eight-week period once validated; conservation cases can attract additional consultation. The dense terraced streets are party-wall-sensitive, so the commonest delay is a drawing query — we prepare submissions to the council's householder guidance to keep them moving.

Free Fixed Quote

Get your free Custom House planning assessment

Tell us your Custom House (E16) address and ambition — we'll confirm feasibility, local constraints and a fixed fee within one working day.